what is pink insulation foam

What is pink insulation?

The pink cotton-candy colored fiberglass insulation is commonly used in residential homes and commercial buildings to prevent the loss of thermal energy. While it may appear harmless to the naked eye, it actually contains thousands upon thousands of small shards of glass and sand that can make their way onto your skin, eyes or even inside your ...

What is the are value of pink fiberglass insulation?

The R-value for insulation is assigned to tell you how efficient the insulation is. The higher the number, the more effective the insulation. Depending on the type of fiberglass insulation you use – batt, attic, or wall – the R-value can range from 2.2–4.3 per inch.

What is the best foam insulation board?

There are a few different kinds of foam board insulation DIYers should know about:

• Expanded Polystyrene (EPS). This is the same stuff your disposable coffee cup and is made out of and it’s used to protect fragile items in their packaging. ...
• Extruded Polystyrene. This foam board insulation is the rigid pink or blue panels that can be found at home centers in many different thicknesses. ...
• Polyiso (Polyisocyanurate). ...

What is the difference between pink fiberglass insulation?

Fiberglass insulation can come in a variety of colors. Between the white, brown, pink, and yellow options, many wonder what the differences are. In truth, the core difference is the manufacturer: yellow insulation is a generic color, while pink, for example is trademarked by one company.

What is pink foam made of?

Pink and blue foam are similar, both made from expanded polystyrene—in fact this is how they are most often referred. Best known as Styrofoam (created by Dow Chemical), they are by far the most widely used.

What is the difference between blue and pink foam?

Main Difference Between Pink And Blue Foam Boards The two products also have the same insulating power. However, blue foam boards are manufactured by Dow Chemical Co. whereas the pink foam boards are manufactured by Owens Corning company. The boards are marketed under different brand names.

What is the R-value of pink foam?

5 per inchExtruded polystyrene or XPS (foam is usually pink or blue) XPS has an R-value of 5 per inch of thickness requiring 5" of insulation to achieve R-25.

Is pink foam insulation waterproof?

Foam board insulation products are generally considered water and mold resistant but expanded polystyrene foam boards (EPS) have air bubbles that can collect moisture and become wet. Moisture makes it hard to prevent mold from growing, making the foam board also prone to mildew growth.

What is pink foam used for?

Typically used as a cushioning aspect of a package or work surface, pink foam has been a “solution” for many problems. However, there has been a misconception of the anti-static properties and how long they last. Pink anti static foams have a shelf life.

Which insulation board is best?

Polyurethane (PUR) is one of the most efficient insulation materials on the market. PUR is available in the shape of insulation boards or foam. However, the boards have a better insulation value than the foam variant. Moreover, these boards guarantee a certain thickness in advance and nothing has to be taped over.

What is the thinnest insulation with the highest R-value?

Thermablok® AerogelThermablok® Aerogel is a revolutionary advancement in thermal technology offering the thinnest insulation available to prevent thermal and cold bridging. Classed as a Super Insulation, Aerogel has the highest insulation value of any known material with the lowest thermal conductivity value of any solid (0.015W/mK).

What is the best Styrofoam insulation?

polyisocyanurateThe best kind of rigid foam insulation is polyisocyanurate, also known as polyiso. It has the highest R-rating of any rigid foam insulation and comes with a reflective foil on both sides, allowing it to act as a radiant barrier as well.

Can I use Styrofoam as insulation?

Because heat is trapped in the air inside of these bubbles also means that conduction and convection cannot happen properly. So there is some science and the reason behind the great success of the Styrofoam. So the answer to the main question is – YES, Styrofoam is an amazing insulator.

What is the best insulation to prevent mold?

Fiberglass insulationFiberglass insulation without backing may be the best choice. Cellulose insulation is constructed of ground paper, which is an ideal food source for the growth of mold if it becomes wet.

What happens if foam insulation gets wet?

Does spray foam absorb water? Yes, there are open cell spray foams on the market that will absorb water, but that doesn't mean they all do. The spray foam used here at RetroFoam of Michigan does get wet and water even moves through it, but it doesn't trap moisture indefinitely. This means it will dry out.

What is the difference between Type 1 and Type 2 insulation?

Type 1 is moulded bead polystyrene. However, Type 2 is moulded expanded polystyrene (design R4/inch) or of extruded polystyrene (design R5/inch). Type 3 and Type 4 polystyrene insulation are generally extruded polystyrene.

What is blue foam used for?

DuPont Styrofoam™ Insulation (Blue Board) is a nonstructural, rigid board insulation manufactured of Extruded Polystyrene Foam (XPS). Blue Board can be used both on exterior and interior walls to give you a continuous insulation barrier that can increase effective R-value of the wall by up to 20%.

What is the R-value of 2 inch blue styrofoam?

STYROFOAM extruded polystyrene insulation is rated at an R-value of 5.0 per inch at 75°F.

Is blue Board closed cell foam?

Blue Board is available in a wide range of board styles, and thicknesses which share common characteristics. Being closed cell foam it makes a good insulator (typically R5 per inch) that is resistant to water damage and mold growth.

What is the pink insulation board called?

Pink foam insulation board, also known as rigid foam insulation, is sometimes made of recycled materials, often making it an environmentally friendly choice.

What is pink and blue insulation?

Pink and blue rigid foam insulation boards are made from polystyrene resin that is melted and then forced through a die to form it into the desired shape. As insulators, pink and blue boards perform virtually identically, with an insulating value of R-5 per inch of thickness. The two colors of board are sold under different brand names, however, and the two brands are differentiated mainly by the specialized variants within their product lines.

Who makes pink foam board?

Pink foam board is manufactured by Owens Corning, and it's marketed under several different brand-specific product names, including Foamular, ...

What is blue foam?

Blue foam products intended to be used as sheathing on exterior walls are faced with thin plastic films that protect the board's extruded polystyrene core and add extra strength to the board. Boards intended for interior walls are unfaced, but some of them include convenience features such as notches at the edges to accommodate wood nailing strips. Other blue foam products are designed for roofing or cavity wall applications. High-density blue foam products are designed to resist compression under heavy loads when they're used beneath concrete slabs.

Is polystyrene insulation more expensive than extruded polystyrene?

Expanded polystyrene insulation is less expensive than extruded polystyrene, but it is also more fragile and is a less effective insulator. Polyisocyanurate panels, also called ISO panels, consist of a rigid foam core sandwiched between foil or fiberglass facings.

When to use foam board insulation?

Because of its resistance to moisture, foam board insulation is a great choice whenever and wherever there is a chance it could get wet, such as: an exterior foundation, inside a basement against the foundation, and on the outside of a house beneath a house wrap. Foam board insulation is more expensive than traditional batt insulation, so use it only when moisture is a factor and it makes sense with your budget.

What is the best insulation for a batt?

Foam board insulation is a great alternative to the very common fiberglass batt insulation that is in most of our homes. It has a higher R-Value per inch of thickness, it’s resistant to moisture and is easy to work with.

What is polyiso foam board?

Polyiso (Polyisocyanurate). This is an even more dense and more expensive foam board insulation. It provides an R-value of 6 per inch of thickness and often comes foil-faced to help reflect radiant heat. Polyiso comes in several thicknesses and is used over house sheathing underneath siding or in attic spaces where its reflective properties are very effective.

What is EPS insulation?

EPS is used under roofing, over foundation walls and beneath siding. Extruded Polystyrene. This foam board insulation is the rigid pink or blue panels that can be found at home centers in many different thicknesses. It is denser than EPS and provides more R-Value with a rating of 5 per inch of thickness. This foam board insulation is available ...

What color is insulation?

After seeing a few different colors of insulation on the market, you might think the yellow, pink, white, green and brown colors carry some significance.

What is the color of cellulose insulation?

But other materials may appear in their natural state. For example, cellulose fiber insulation, also known as newspaper insulation, tends to look brown or white.

What is the best insulation material for a house?

Types of Insulation Materials. Fiberglass is undoubtedly the most popular choice of material for home insulation. However, according to the U.S. Department of Energy, other choices include mineral wool, cellulose and other natural fibers, polystyrene and various foam materials.

What is the best insulation for a blown in attic?

Fiberglass, rock wool and cellulose fiber insulation are the most common materials used in blown-in projects. This installation technique keeps the insulation materials loose and crumbly, allowing air pockets to naturally form between the fibers. A blower machine allows the installer to place the materials precisely where they need to be. Construction teams typically reserve this type of installation process for attic floors, because the materials can lay horizontally and will not be compressed by any paneling.

What is the most common insulation used in blown in projects?

Fiberglass, rock wool and cellulose fiber insulation are the most common materials used in blown-in projects. This installation technique keeps the insulation materials loose and crumbly, allowing air pockets to naturally form between the fibers.

Why are insulation panels flat?

Due to the rigid nature of polystyrene and foam-based products, these insulation materials are commonly sold in flat panels and are cut to size.

What is the second type of insulation called?

Two primary types of insulation installation techniques exist. The first is known as batt and roll and the second is called blown-in or loose fill insulation. Advertisement. The color of the insulation does not determine the type of installation procedure that will be used.

What is the difference between pink and blue foam insulation?

If you are looking for an insulation panel that offers adequate protection and energy savings, you can choose the pink or blue foam boards. Both are manufactured using the same process and contain similar chemical components. The two products also have the same insulating power. However, blue foam boards are manufactured by Dow Chemical Co. whereas the pink foam boards are manufactured by Owens Corning company. The boards are marketed under different brand names. You’ve probably heard of the Styrofoam SM insulation products, this is simply a brand name for the blue foam boards. The pink foam boards are available in the market using different brand names including Propink, Insulpink and Thermapink which are all products from Owens Corning.

Who makes pink foam boards?

However, blue foam boards are manufactured by Dow Chemical Co. whereas the pink foam boards are manufactured by Owens Corning company. The boards are marketed under different brand names. You’ve probably heard of the Styrofoam SM insulation products, this is simply a brand name for ...

What is blue foam?

When To Use Blue Foam Products. Blue foam boards come with thin plastic films which protect the polystyrene core and also enhance the strength of the board. It’s no wonder they are commonly used for insulation on the exterior walls. There are blue foam boards that are designed for interior walls.

What is the R value of pink foam board?

They are both manufactured using polystyrene resin and perform virtually in a similar manner. They have an insulating R value of 5 per inch of thickness.

Can pink foam board be used on concrete?

There are those designed for interior walls whereas others work best on exterior walls. Pink foam boards can also be used beneath concrete slabs, roofs or foundation walls. When used for foundation wall insulation, the pink boards usually have drainage channels on the surface and a simple filtration system that prevents soil from clogging ...

Is expanded polystyrene insulation cheaper than pink and blue foam insulation?

There are also expanded polystyrene insulation products which are far less costly than the pink and blue foam boards. The major drawback to these expanded foam boards is that they are very fragile and have a lower insulating power. If you are looking for an effective insulator, opt for the pink and blue extruded foam boards.

Why is pink foam used for fire stopping?

The main reason pink foam is used for fire stopping is because it is a lot cheaper, faster and claims to be ‘fire rated’ on the can. This and most quality controls in modern construction have decreased due to additional pressure on the speed required to complete projects.

Is there a standard for expanding fire foam?

There is not a one standard does all for expanding fire foams, as they have been tested differently.

Can you replace foam?

With no evidence of the installer or products used it is un-likely that any Foam can be warranted by anyone and should be removed and replaced.

Is pink foam toxic?

10 things to remember about Pink Foam. Depending on the product and conditions of the fire it can also produce toxic fumes causing permanent health damage. When pink foam has been used on a timber structure the results will bf foams in timber structure the results will be un achieve satisfactory fire-resistant results.

Can pink foam cause fire?

Installing inadequate polyurethane pink foam can result in smoke and fire entering apartments, corridors and any other compartment therefore leading to injury or even death.

Is fire resistant foam a fire spread?

Not without evidence, it is very likely to be incorrectly selected for purpose/substrate or services or installed to manufacturers specifications. Fire resistant Foam are very often incapable of providing fire integrity for fire stopping purposes and can often only provide a class of fire spread classification.

Can expanding foam be used on plastic pipe?

Expanding Foams are not an intumescent, it cannot close or crush a plastic pipe and should never be installed as such. Most Foams are generally highly combustible and should be kept away from direct fire contact, unless if it has been specified on the manufacturers specification to do so.