What does a PoolRx do?
PoolRx eliminates existing algae fast and prevents algae from coming back. The chelated minerals free up low levels of chlorine to be more productive in the water, providing amazing clarity. The minerals dissolve out the unit completely and immediately to form a stable residual throughout the entire body of water.
What is PoolRx made of?
PoolRx is a Mineral Technology does two very simple things when used in your pool or spa; it eliminates all algae and will allow you to use less chlorine during the pool season. The active ingredient is Copper Sulphate Pentahydrate (chelated).
How long does a PoolRx last?
Answer: The PoolRx unit has a effective life of 12 months in the water. After the first 4-6 months you will need to add 1 PoolRx booster (#102001) per 20k gallons for the product to continue to work for the remaining life span of the unit.
Does PoolRx stain pool?
Once the stains are lifted you can either drain and refill the pool with copper free water, or use a sequestrant to keep the copper in solution so it doesn't stain the pool.Jul 22, 2019
How do you use PoolRx?
2:323:43PoolRx Overview and Use Video: Eliminates and Prevents all AlgaeYouTubeStart of suggested clipEnd of suggested clipIf the chemistry looks good simply take your skimmer lid off put the pool rx into your skimmerMoreIf the chemistry looks good simply take your skimmer lid off put the pool rx into your skimmer basket. And a pool rx will last up to six months in your pool.
Does PoolRx cause green hair?
The high level of chlorine can strip the hair follicle. If the blue PoolRx minerals get inside the hair follicle, blonde hair and blue make green.
How long does it take PoolRx to work?
First you put the PoolRx into your swimming pool skimmer or pump basket. The minerals completely dissolve within the first 24 hours of use and form a stable residual of minerals throughout the entire pool water. This frees up low levels of chlorine and allows them to be more active and available to kill bacteria.
Can you use PoolRx in a salt water pool?
IDEAL FOR SALT POOLS PoolRx improves the salt water experience. The minerals reduce the salt chlorine production needed to keep your salt pool sanitized and algae free. Less salt chlorine production extends the life of the salt cell and reduces the amount of acid needed to balance the pH.
Do you shock a mineral pool?
0:041:28Shocking Your Pool when using the Pool Frog Mineral System - YouTubeYouTubeStart of suggested clipEnd of suggested clipNever pour the shock into the skimmer or into the cycler shock treatments flowing directly into theMoreNever pour the shock into the skimmer or into the cycler shock treatments flowing directly into the chlorine pack in a confined space like the cycler could result in fire or explosion.
How do I clean my pool prescription?
4:356:53Green Pool Clean Up a Step by Step Video Guide: Using PoolRxYouTubeStart of suggested clipEnd of suggested clipI would insert the pool rx unit into the pump. Then I would run the pool for 24 hours next thing youMoreI would insert the pool rx unit into the pump. Then I would run the pool for 24 hours next thing you want to check the corn. Level if it's zero it out go in and add some more liquid chlorine. Okay.
What is PoolRX?
0:00 / 0:00. Live. •. PoolRx is a Mineral Technology does two very simple things when used in your pool or spa; it eliminates all algae and will allow you to use less chlorine during the pool season. The active ingredient is Copper Sulphate Pentahydrate (chelated).
How long does a pool rx last?
The PoolRx unit should last 4-6 months. PoolRx eliminates all algae fast. Even microalgae that you can't see but uses up the chlorine in your pool. This will allow the chlorine in the pool to be more active and available to kill organics, bacteria, and virus.
What happens if your CYA is at saturation?
However, understand that if your CYA is at a saturation point, and water gets out of balance, the CYA can come out of solution. If it does this, the CYA can coagulate the PoolRx minerals, which combined, will show up as purple dust in the pool.
How much residual is needed for PoolRx?
Start at 0.5-2ppm max. (With PoolRx in the water, a typical residential pool can be at 1-2ppm and it will hold for the week) PoolRx only needs 0.5ppm residual to be completely effective. PoolRx uses a proprietary chelating agent that prevents fall out and staining due to pH fluctuation or over oxidation.
Does pool rx prevent algae growth?
See the cautions below if you are using PoolRX with high CYA levels see the caution below. It doesn't matter if your Phosphate level is 10,000, PoolRx will prevent algae growth no matter the Phosphate levels. PoolRx is ideal for a saltwater pool also.
Can pool rx dissolve in water?
If the water is saturated with TDS and CYA or you over dose, the PoolRx minerals won’t have any room to dissolve into solution in the water and will stay in granular form. If this happens the minerals may have to be vacuumed up, and or, they can stick to the scale build up on the surface.
Can you use PoolRX with copper?
If you have under .02ppm of copper in the water, it is OK to use PoolRx. If your copper test reads higher than .02ppm, we recommend using CuLator.
What metals are in PoolRX?
JasonLion. PoolRX adds silver, copper, and zinc to the pool. While those metals can help prevent algae if maintained at the correct levels (which seems unlikely given their directions), they will also tend to cause some problems down the road.
How long does it take for chlorine to kill bacteria?
Basically, typical chlorine levels in pools (with an FC that is around 10% of the CYA level) kill most bacteria in under 1 minute while it takes silver ion 10-20 minutes and copper ion 40 minutes for the same level of disinfection.
What is the EPA drinking water limit for copper sulfate?
For a copper sulfate product, it essentially ensures that the copper concentrations don't exceed the EPA drinking water limit of 1.3 mg/L. That's pretty much assured in pool water at normal pool pH since the copper would stain if the concentrations were that high.
Is commercial sanitizer NSF approved?
Commercial pools are a much different breed than residential pools. When looking at commercial sanitizers (or any commercial equipment) be sure to check if it is NSF approved. Many alternative sanitation solutions are not NSF approved and most health departments won't recognize non-NSF approved methods.
Do you need to add chlorine to a pool?
Yes, a small amount of chlorine still needs to be added. 0.5ppm to 1.0ppm in residential and 1.5 ppm is health department requirement for commercial pools. We recommend our in line chlorine feeder or floater. Maintaining a little bit of regulated chlorine all of the time is key.
Does BK406 kill algea?
bk406. Just another in a long line of "systems" that use copper and other metals to supposedly kill algea at much lower levels of chlorine (i.e. 0.5-1 ppm chlorine). All it will do is add unwanted metals to your pool water and cause you to keep an FC level that will cause algea to get out of control.
Does chlorine help with algae?
Of course, you are using chlorine with PoolRx so chlorine is your disinfectant and copper does prevent algae growth when used at sufficiently high concentrations, but at the risk of metal staining (especially on plaster surfaces) if the copper concentration and/or pH get too high.
How effective is PoolRx?
The PoolRx Mineral Unit is a continuously effective algae eliminator that is made up of a proprietary blend of minerals. Using a specially treated alloy cylinder, the minerals in the unit dissolve out of the cylinder that forms a steady residual throughout the pool for up to 6 months. This product will eliminate algae so that low levels of chlorine can be more effective in the pool water. The minerals in the unit are replenished every time they return through the cylinder so that the chlorine in the water can last as long as possible.
How long should I leave pool rx in?
The PoolRx unit should be added to the pool when the pump has at least 3 to 4 hours left in on the run cycle.
How long after pool rx is installed can you re-clean?
Do not re-clean or backwash filter for at lest 2 weeks after PoolRx unit is installed so minerals can dissolve through the filter, whether it is a cartridge, D.E., or sand filter. View more.
How often should I run a pool pump?
Pump should run during the heat of the day. The pool should turn over its volume of water at least 1.5 times per day, this normally requires 6 to 8 hours per day , this depends on gallons of your pool and pump flow rate.
How long do you have to return a product?
You have 30 days from purchase to return any item. All items must be in original packaging and be in new condition. Partly used or opened products cannot be returned. All returns must be pre-approved by obtaining a RMA (Return Merchandise Authorization). This can be done via email or phone call. Return shipping charges are the responsibility of the customer.
