What is FJ pine primer?
Primed Finger Jointed (FJ) Pine is a time & cost-effective solution when a real timber substrate that is ready to paint is needed. Pre-coated with a water-based primer this timber offers strength, stability and increased lengths through the finger jointed glue-bonds.
What is FJ pine moulding?
It is manufactured from FJ Clear Pine which provides enhanced strength & stability and finger jointed glue-bonds offers longer lengths. Pre-coated primed finish appears matte white. Porta's primed mouldings are ready to paint with either water (acrylic) or oil-based paints. Primed FJ Pine is very easy to work with standard tools.
What is Porta primed finger jointed pine?
Porta Primed Finger Jointed Pine is a time & cost effective solution when you are painting but want a real timber substrate. Manufactured from finger jointed clear pine the product has enhanced strength & stability. Featuring two coats of a waterbased primer so it is ready to paint.
What is FJ pine used for?
Its low density means it holds nails and screws very well. Primed FJ Pine is ideal for a wide variety of internal applications including window & door trims, architrave, skirting and trim mouldings, decorative uses, toys, joinery/shelving, panelling, and lining boards. Want further information comparing timber species?
What is primed FJ board?
Primed Finger-Joint, also known as a comb joint, is a woodworking joint made by cutting a set of complementary, interlocking profiles in two pieces of wood, which are then glued. The cross-section of the joint resembles the interlocking of fingers between two hands, hence the name "finger joint".
What is primed pine?
3/4″ Primed Pine Boards Boards are made of finger-jointed clear Radiata Pine with an exterior grade primer. These boards can be used interior or exterior. These boards are often used for exterior trim, fascia, bookshelves, shelving and furniture. Boards can be cut at our saw-house for easier transportation.
What is FJ pine?
Finger jointed Pine is a long, straight and defect free length of timber less likely to twist than a natural piece of timber. A finger joint is a joint where the lines resemble interlocking fingers. Lamination allows for wider sizes to be produced which are strong and straight.
What is FJ board used for?
Finger joint lumber was the lumber industry's way of creating the long pieces of wood that we need for non-structural things like trim and casings. Sure you can buy non-finger joint versions which are usually called stain grade, but they cost a lot more than their finger jointed cousins.
Can primed pine be used outside?
This lumber can also be used in exterior finishing applications as long as it is properly primed and painted or stained. Interior or Exterior use.
Do you need to undercoat pre primed timber?
Put simply, pre-primed mouldings are those which have been coated with a paint primer, eliminating the need for the use of an undercoat. This means you will save time and money having the convenience of your timber delivered ready to install, and paint your final colour.
What is FJ clear pine?
Overview. Finger Jointed Radiata Pine is a clear grade manufactured in Australia and New Zealand. A finger joint is a joint where the lines resemble interlocking fingers. Finger Jointed Radiata Pine is a long, straight and defect free length of timber less likely to twist than a natural piece of pine.
What is better pine or MDF?
Although MDF is stronger, it is more difficult to repair if dents or marks are made on the material. Finger jointed pine is slightly more expensive than MDF. As it is a natural timber material, it is softer than MDF and can be more susceptible to marks. Intrim ran a test to show the effect of moisture on MDF.
Is pine or MDF better for skirting?
Do you live in a period property that needs its skirting updating? MDF is stronger than pine, has a smooth, blemish-free surface, is less prone to warping and is a good choice if you are painting skirting boards. MDF comes either pre-primed or finished making it easy to paint. It boasts plenty of styles and sizes.
Whats stronger MDF or pine?
Real wood, even softwood, is stronger than MDF. So, if you anticipate installing baseboards in a high-traffic, high-impact environment, you would want to purchase real wood or even PVC baseboards.
Is pine wood good for baseboards?
If you have painted windows and door trim, a stained and varnished baseboard might clash, which would look unnatural. If you intend to paint, using a softwood, like fir or pine, is best. A hardwood that matches your wood floors' color and grain is the best choice when you intend to stain and varnish.
Is pine good for trim?
Softwoods such as fir or pine are regularly used for paint grade trim and moldings since it is generally less expensive and easy to work with.