How is reverse board and batten siding attached?
Unlike conventional board-and-batten siding—where boards are fastened directly to the wall, and battens are nailed over the gap between the boards—with this technique, the narrow battens are applied first, and the wide boards are nailed on second.
What are the different types of board and batten?
Most common types of lumber used in board and batten siding are:Cedar.Pine.Redwood.Hemlock.Locust.White Oak.Vinyl.Engineered wood.
Is board and batten the same as siding?
No, they're not the same. Board and batten is the style of siding while Hardie Board is the material manufactured by James Hardie. Hardie Board is a type of fiber cement siding, and it can be used for board and batten. If you're interested in replacing the siding on your home, schedule an appointment with our team.
Why is it called board and batten siding?
A small strip of wood about 2 or 3 inches wide called a 'batten' would then be nailed over the crack or seam to make it weather tight. Hence the name Board and Batten. It was when early settlers started to build two- and three-story houses that this type of siding became so popular. Back to Board and Batten Siding.
What is the best board and batten siding?
Western Red Cedar is an excellent siding choice as it has natural oils and resins that make it resistant to rot and decay. Ponderosa Pine boards are a cost-effective and easy way to create a board and batten look. They can be painted any color, and leaves a natural "old world" look.
Is board and batten outdated?
Today, board and batten has been largely removed from it's practical origins. Exterior board and batten still exists, but the most popular use of this design is interior. Entire walls or ceilings can be covered in board and batten, or it can be used as wainscoting.
What is board and batten siding look like?
So, what is “board and batten?” It's a type of siding where thin strips of wood molding—or “battens”—are placed over the seams of panel boards. The result is an aesthetic that is both rustic and chic, with the strong vertical lines providing shadows and textures to the home exterior.
What is the difference between shiplap and board and batten?
Shiplap and Board and Batten are two different wooden wall treatments. Shiplap refers to wooden boards of the same width with grooves that help each board fit together tightly, while board and batten refers to boards of different widths installed with space between, usually vertically.
Does board and batten siding make house look taller?
It can help make homes look taller by drawing the eye upward, and it can help emphasize certain architectural styles, like the modern farmhouse. Since board and batten siding is made up of two pieces, it's important to choose a highly durable and low maintenance material when installing this style.
Why is board and batten so popular?
As an exterior cladding, board and batten manages to impart a rustic, handmade quality even to new homes built in unmistakably contemporary styles. Within the home, board and batten commonly appears in mudrooms and hallways, bedrooms and dining areas, adding charm to otherwise bland expanses of drywall or plaster.
Can you paint board and batten siding?
Unlike painted brick houses, painting board and batten siding isn't a one-and-done deal. The paint can be updated, changed, and redone with relative frequency to suit changing trends in exterior paint colors. And, with composite materials, maintenance is easy.
Can board and batten look modern?
Basically, board and batten includes side boards separated by narrow wood strips called battens. You can create a faux look by simply placing the narrow strips evenly apart on the wall, and then painting the wall and the strips the same color to look like true board-and-batten siding.
What is the difference between shiplap and board and batten?
Shiplap and Board and Batten are two different wooden wall treatments. Shiplap refers to wooden boards of the same width with grooves that help each board fit together tightly, while board and batten refers to boards of different widths installed with space between, usually vertically.
What kind of wood do you use for board and batten?
CedarCedar is a common choice for exterior board and batten siding, but other acceptable wood species include Cyprus, redwood, locust, white oak, and hemlock.
What is the difference between board and batten and wainscoting?
Wainscoting refers to a common practice of covering the lower third of a wall. Board and batten is a pattern consisting of square or rectangle sheets of material joined by thin braces called battens.
What size board do you use for board and batten?
The most common arrangement uses 1x10 boards and 1x2 or 1x3 batten. You can also use 1x8 or 1x12 boards and 1x4 battens. To seal out moisture, the boards should be in sound condition and free of open knots, and the battens should lap at least 3/4 inch onto the boards on both sides.
Technical Information
Reverse Board & Batten Reinforced Vertical Siding is manufactured of components using PVC resin extruded and fused with an expanded Polystyrene (EPS) foam backing.
Installation
Prior to commencing work, verify governing dimensions of building, examine, clean and repair, if necessary, any adjoining work on which the siding is in any way dependent for its proper installation. Sheathing materials must have an acceptable working surface.
Warranty Details
CertainTeed supports Reverse Board and Batten Reinforced Vertical Siding products with a Lifetime Limited Warranty including PermaColor™ Lifetime Fade Protection to the original homeowner. The warranty is transferable if the home is sold.
LAYOUT AND FASTENING
Right off the bat, however, the building’s high-performance wall system created complications for the siding application. The fat assembly consists of an inner 2x4 stud wall that’s sheathed with Huber Zip System oriented strand board (OSB) sealed at the joints with Zip tape.
VARIABLE MATERIAL
Thickness of the boards also turned out to be an issue, Pollard says. “The lumber company milled this wood at an inch and a quarter,” he explains, “but the pieces shrank differently.
DETAILING THE OPENINGS
The rainscreen system requires a way for any windblown rain that penetrates behind the siding to drain out, and for air to enter at the bottom and exit at the top for drying. Openings have to allow good airflow and drainage, but without letting bugs in. This makes for a complicated detail above windows and penetrations.
CONNECTING TO THE SITE
As the project nears completion, the cladding system is serving an interesting design function: The rough material, applied in its distinctive way, is helping the building with its strikingly original forms to blend into its rustic setting on a back road on a wooded island.
What is reverse board and batten?
Reverse board and batten have very narrow boards with wide battens installed over the seams. Like horizontal siding, the size variations will have a dramatic effect on how natural light creates shadows on the siding.
What is board and batten siding?
Board and batten, or board-and-batten siding, describes a type of exterior siding or interior paneling that has alternating wide boards and narrow wooden strips, called "battens.". The boards are usually (but not always) one foot wide. The boards may be placed horizontally or vertically. The battens are usually (but not always) ...
Why is board and batten siding called barn siding?
Because it was inexpensive and easy to assemble, board and batten was used for structures such as barns and garden sheds. Board-and-batten siding is sometimes called barn siding because many barns in North America are constructed this way. Even today, this type of siding on a house exudes a comfortable informality.
Where is the siding on Disney's Celebration?
Two contemporary uses can be found on opposite shores of the U.S. In the planned community of Celebration, Florida, established by the Disney Company in 1994, the siding is used in one of their house plans, a Neo-folk Victorian.
Is board and batten a construction material?
Remember that board and batten is not a construction material , and often the materials used will affect the overall final appearance.
Is board and batten siding more formal?
Even today, this type of siding on a house exudes a comfortable informality. Board-and-batten shutters, which use the batten as a horizontal brace, are also considered less formal and more provincial than louvered shutters. Because it's how the batten is used with the board that is important, they don't have to be made of wood.
What is batten siding?
Historically used on barns, this type of siding uses strips of narrow wood which are called battens. These batten boards are alternated with wider boards, creating a layered effect on your home. Many appreciate this unique style and thus choose board and batten steel siding over all others thanks to it's improved durability.
How much does steel board siding cost?
Steel board and batten siding can be installed for around $3.50 to $4.50 per sq ft. Some companies like Trulog Siding will give you free shipping on orders of over $1,000.
What is the fastest growing type of siding?
At the moment, Board and batten siding is one of the fastest-growing options for home siding.
How much does vinyl siding cost?
For vinyl material, you will typically see a board and batten siding cost of anywhere between 2 and 7 dollars per square foot. This comes out to about $10,500 for a home of 1,500 sq ft. Wood such as Cedar and others will cost about $3 per sq ft and can cost anywhere from $7,000 to $10,000 for a 1,500 sq ft home, depending on labor costs.
Is board and batten siding good for resale?
A long lifespan is one of the main advantages of board and batten siding, with a properly cared for installation lasting years if not decades. Another benefit is that it will improve your resale value, thanks to the aesthetic value it adds to your home — especially when choosing a neutral tone such as white board and batten.
Can board and batten be installed vertically?
Board and batten is also versatile, able to be installed vertically, horizontally, or both. It’s also cheap to repair due to its use of individual pieces rather than large sheets of siding.
Is wood siding good for a house?
Wood. Wood siding is great for those who want the most natural, rustic look possible for their home. While it does provide great aesthetic value, it can be susceptible to disease, rot, and decay if moisture should find its way inside. Termites can also be a problem with this material.
What is Board and Batten Siding?
The style evolved in the United States as a more efficient alternative to the log cabin.
How to Use Board and Batten Siding
The style provides the versatility to create an ultra-personalized aesthetic.
Board and Batten Siding Examples
This siding style was traditionally made of wood. But wood siding is vulnerable to moisture damage, invites insects like termites, and requires more ongoing maintenance. Modern building products, like fiber cement siding, make it possible to achieve an identical aesthetic with more durable materials for a lower-maintenance siding solution.
Pros of Board and Batten Siding
Board and batten siding is a very popular choice for both new construction and renovations. For those thinking about selling or renting their home, investing in a trendy siding material is a great idea.
Cons of Board and Batten Siding
Wooden board and batten siding is installed one piece at a time. This detailed and labor-intensive process takes far longer than installing an alternative like shingles or lap siding.
Final Thoughts
There are countless ways to incorporate board and batten siding onto part or all of your home’s exterior. And if you opt for pre-molded vinyl or fiber cement, board and batten is a relatively cheap and easy way to boost curb appeal.
What is board and batten siding?
Board and batten siding is one of the oldest styles of cladding in the United States. It was first created when sawmills became regular and accessible additions to many communities. Wood was milled into long boards that could be installed vertically over the home from top to bottom.
How wide is a batten?
A true batten is 2-inches in width or smaller, but you can use larger widths by installing trim in place of a batten if you want a thicker appearance. They’re installed directly over the vertical panels to get the traditional look. You can match any of Allura’s vertical panels with their trim - 2-inch, 4/4-inch, or 5/4-inch.
How far apart should battens be installed?
If the boards were 12-inches wide, then that was the batten spacing. If the boards were 8-inches wide, then the battens were installed 8 inches apart.
What are battens used for?
Battens were originally thin strips of wood that were just large enough to fasten over the gaps between the milled boards, helping to stop air and moisture from infiltrating the siding. Today, they’re more decorative than functional, but it’s still important to get their sizing right.
How wide are Allura vertical panels?
Allura’s fiber cement vertical panels come in 4-foot widths, making nailing them directly to the studs an easy process. Studs are usually located every 16-inches or every 24-inches, depending on your home and frame.
Do battens have irregular spacing?
Some older board and batten homes may have had irregular spacing, as the milled boards may not have been as uniformly cut as what is available today. Over time, board and batten has developed more of a regular appearance. It’s important to get the spacing of the boards, the size of the boards, and the battens correct for the installation to go well.
Do you need to space battens apart?
Keep in mind that the spacing refers to the center line of each batten; wider battens take up more space than thinner battens, so if you are using a wider batten, you may want to space them apart further, otherwise the siding could become cluttered and busy in appearance.
How to nail a batten?
Use a level to make sure the boards are plumb. If a batten is crooked, stretch a string alongside it and force it straight as you nail.
How wide is a 1x10 board?
For instance, if you are installing 1x10 boards that are 9-3/8 inches wide (measure to be sure because they can vary in width) with a 5/8-inch gap, figure 10 inches for each board. In some areas it is common to attach vertical 1x2 furring strips before installing board-and-batten siding.
How to make a water table with a board?
You may rip-cut the first board to achieve the desired layout. Cut the length to fit or to a determined height if you will stack boards on top. Place the board on the water table about 1/4 inch shy of the corner, use a level to check that it is plumb, and drive pairs of nails every 16 inches.
Can board and batten be installed on plywood?
Board-and-batten can be installed onto solid plywood or OSB sheathing. If your sheathing is not solid, you will need to first attach horizontal furring strips. With a helper, expect to spend a day installing 800 square feet of siding.
Performance—And Looks
Layout and Fastening
- Right off the bat, however, the building’s high-performance wall system created complications for the siding application. The fat assembly consists of an inner 2x4 stud wall that’s sheathed with Huber Zip Systemoriented strand board (OSB) sealed at the joints with Zip tape. Outboard of this airtight box are fastened vertically run wood I-joists, with airtight, vapor-open WrapShield IT weat…
Variable Material
- Thickness of the boards also turned out to be an issue, Pollard says. “The lumbercompany milled this wood at an inch and a quarter,” he explains, “but the pieces shrank differently. We had some that shrank down to 1 3/16 inches, and some that shrank down to an inch, depending on whether the piece was vertical grain, rift sawn, or plain sawn.” The reverse battens were ripped from the s…
Detailing The Openings
- The rainscreen system requires a way for any windblown rain that penetrates behind the siding to drain out, and for air to enter at the bottom and exit at the top for drying. Openings have to allow good airflow and drainage, but without letting bugs in. This makes for a complicated detail above windows and penetrations. The roofing company had supplied some pre-bent coated steel flashi…
Connecting to The Site
- As the project nears completion, the cladding system is serving an interesting design function: The rough material, applied in its distinctive way, is helping the building with its strikingly original forms to blend into its rustic setting on a back road on a wooded island. “At this point,” says Pollard, “we can step back and look at it, and we’re thinking, ‘this is pretty cool.’”