| Curtain Pocket Size | Rod Diameter |
|---|---|
| 1 ¼ Inch - 1 ½ Inch Pocket | ¾ Inch Rod |
| 1 ¾ Inch Pocket | ¾ Inch Rod |
| 2 Inch Pocket | 1 Inch Rod |
| 2 ½ Inch Pocket | 1 ¼ Inch Rod |
What size rod pocket do I need for a round pole?
As a general rule, the rod pocket needs to be at least twice the size of the diameter of the round pole, or half an inch more than the size of a flat (continental) curtain rod. For example, a 2-inch round pole will require a rod pocket of at least 4 inches, while a 2-inch flat curtain rod will require a rod pocket of at least 2-1/2 inches.
What size rod pocket do I need for curtain rod?
A 1 ½” rod pocket should be used on a standard 1” curtain rod or with a decorative rod 13/16” diameter or smaller. A 3” rod pocket should be used on a standard 2 ½” continental or dauphine rod or on a decorative rod 1 3/8” – 1 ½ ” diameter.
What are rod rod pockets?
Rod pockets are the casings at the top of curtains that you slip over the curtain rod.
What size rod pocket valance do I Need?
There are various rod pockets available, but the 3-inch size is most commonly found. Let’s take a look at more details and what kind of hardware you’ll need. YES – a flat rod pocket valance on a wooden pole. YES – a gathered swag rod pocket valance on a flat curtain rod.
How big should a curtain rod pocket be?
What is a rod pocket valance?
How many times should a valance be gathered on a rod?
Can you hang a valance on a curtain rod?
Can you put a pocket valance on a wooden pole?
Do rod pocket valances have thread?
See 1 more
How do you measure for rod pockets?
Measure the circumference of your curtain rod. Add 1/2 inch to this measurement. For example, a standard curtain rod will measure 2 inches around so your rod pocket opening will need to be 2 1/2 inches; add this to the length of your curtains.
What does Rod pocket mean?
The most classic and common of all methods of hanging drapery, a rod pocket is a sewn-in pocket, or casing, at the top of a drapery panel that easily slips over a rod and conceals it.
What does rod diameter mean?
All curtain rods are measured by their diameter, meaning the width of the pole's cross-section. Common curtain rod diameters are typically between 1-3 inches, depending on the weight of your curtains.
What does rod pocket look like?
The most classic and common of all methods of hanging curtains, a rod pocket is a sewn-in pocket, or casing, at the top of a curtain panel that easily slips over a rod and conceals it. Curtain panels hung this way bunch nicely and have a simple, casual look.
How wide should a curtain rod pocket be?
A 1 ½” rod pocket should be used on a standard 1” curtain rod or with a decorative rod 13/16” diameter or smaller. A 3” rod pocket should be used on a standard 2 ½” continental or dauphine rod or on a decorative rod 1 3/8” – 1 ½ ” diameter.
Are rod pocket curtains any good?
Rod pocket - Fold Over It is a perfect choice for the sheer layer in a double layer curtain setup. It is not recommended for every day sliding, especially for non-sheer thicker fabrics.
How do you measure a diameter?
Diameter can be found by measuring the distance from one edge of a circle to the other edge, passing through the circle's center point. The diameter can also be found by multiplying the circle's radius by 2, or by dividing the circle's circumference by pi.
Does curtain rod diameter matter?
Similar to choosing the length of your curtain rod, its diameter is also crucial. Too thin, and it can be flimsy. Too thick, and it will look bulky. Curtain rod diameter sizes range between a half-inch to three inches, varying according to its material and the weight of your fabric.
What curtain size do I need?
A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more - sheers can be 3 times the window width) to achieve a look of proper fullness.
How do you make rod pocket curtains look good?
0:406:37How to make store bought curtains look EXPENSIVE - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd if you look at how they're made they give you a few options. On how to hang them you can eitherMoreAnd if you look at how they're made they give you a few options. On how to hang them you can either do the ride pocket. And slide it on the rod. And it'll have that gather look.
How can I make my rod pocket curtains look better?
0:123:55How to Turn Pocket Curtains Into Pleated Curtains - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you put this on a rod. And you're just scrunching it on it's going to be able to go out and beMoreIf you put this on a rod. And you're just scrunching it on it's going to be able to go out and be flat and cover your window. If you're going to pleat your curtain you're going to need at least two.
How do you install rod pocket curtains?
0:494:31How to Install Drapery Panels Video - Rod Pocket Window CurtainsYouTubeStart of suggested clipEnd of suggested clipIf you are using wood brackets attach the bracket holders to both sides of your window with theMoreIf you are using wood brackets attach the bracket holders to both sides of your window with the included hardware. To mount your brackets to the wall reattach them to their mounting hardware.
What does 3 inch rod pocket mean?
Curtain Rod Pockets A 3 inch pocket will accept a 2 1/2 inch continental curtain rod or a 1 1/2 inch diameter round decorative rod. Most of our Curtains and Drapes have this size pocket.
Are rod pocket curtains easy to open?
Rod pocket curtains has a slot at the top (or backside, depending on the style) for the rod to slide into. These styles are almost impossible to open and close, so avoid them at all costs unless it's for decorative purposes only.
How do rod pocket curtains work?
Rod Pocket Curtains A casing sewn onto the back of the curtain panel at the top allows the rod to slip through unseen. Panels bunch in gathers on the rod for a soft look with clean lines. No hardware is required to fix the curtain to the rod. A small portion of the rod will show at each end when the curtain is closed.
How do you install rod pocket curtains?
0:494:31How to Install Drapery Panels Video - Rod Pocket Window CurtainsYouTubeStart of suggested clipEnd of suggested clipIf you are using wood brackets attach the bracket holders to both sides of your window with theMoreIf you are using wood brackets attach the bracket holders to both sides of your window with the included hardware. To mount your brackets to the wall reattach them to their mounting hardware.
What is a pocket curtain?
Just a curtain and a curtain rod can inspire a limitless number of ideas for window treatments – way beyond the original requirement for a means to privacy and absorbing drafts! The rod pocket curtain is probably the simplest of window covering, but it has the potential to also create the most intricate of window treatments.
What is a round rod curtain?
A round or flat curtain rod is inserted into the pocket leaving enough of the rod exposed either end to fit into the holders. Decorative finials create a more finished look unless tops of the curtains are going to be hidden under a valance or pelmet. The fullness of the gathered top created is then adjusted to best present the curtains.
How far above the window should a curtain rod be installed?
Otherwise, the curtain rod should be installed slightly above the window frame for the best effect. While the amount of pleating depends on how you envision the end effect, the rule of thumb is a curtain width of twice or two and a half times the width of the window.
Can you use pinch grip rings on rod pocket curtains?
Rod pocket curtains may be difficult to open and close in which case, pinch-grip rings can be attached to the tops . This creates a quite different look and may need the rod to be placed a little higher above the frame to prevent light creeping in above it.
Can you use pocket tape on pleated curtains?
Corded pleating tape will only retain the original gathered look but will facilitate the addition of pin hooks to allow the curtains to be drawn more easily. Pocket tape can be used creatively to make either pinch pleats or vertical folds depending on whether you use single- or multi-pronged pin hooks. Either way, you’ll need snap-open curtain rings fitted with small metal rings to hang them from the curtain rod.
How to determine curtain rod pocket width?
How to Determine Widths for Curtain Rod Pockets. Rod pockets are the casings at the top of curtains that you slip over the curtain rod. Rod pocket traditionally meant stay in place on the rod, falling in soft folds. Instead of sliding them open and closed, you draw the length of the curtains to each side and tuck them behind a holdback ...
How to measure curtain rod thickness?
Wrap your tape measure around the curtain rod to see how thick it is. Use a flexible sewing tape measure rather than a rigid carpentry one.
What is a rod pocket header?
But what exactly is a drapery pocket? It’s simply a casing on top of the back of the drapery that the curtain rod can slide through. It’s most often called the rod pocket.
How Thick Does the Curtain Rod Need to Be for a Rod Pocket Drapery?
The diameter of the curtain rod is very important. A heavy drapery needs hardware that will match its weight and scale. Not only does a heavy drapery require a sturdy curtain rod that can hold its weight up, but it’s also best if there isn’t too much empty space between the rod and the rod pocket. Your drapery should look something like this…
Can you move a rod pocket drapery?
You will, however, be able to slightly move the drapery. Keep in mind, though, that the rod pocket drapery is intended to be decorative only. If you’re looking for a functional drapery (meaning that it can be opened and closed easily as needed), consider a pleated drapery instead.
Do draperies have a wider pocket?
Are There Wide Pocket Draperies? Of course, there are draperies with a wider pocket, although you may have to have them custom-made. A 4-inch rod pocket is also found sometimes. You’ll need a curtain rod with a 2-inch diameter to achieve results similar to the ones shown here.
Can you use a curtain rod on a drapery?
There are exceptions to this rule. You may use a thinner curtain rod on this type of drapery, but ideally no smaller than one with a 1-inch diameter. This will create some space inside the rod pocket, so your drapery won’t gather as nicely as the pictures shown above.
What is the minimum diameter for a spherical rod?
The minimum diameter needed for this rod is 1 ⅛ inch. Although, again, a larger diameter will look and feel more substantial.
What Is the Average Size of a Curtain Rod?
Standard curtain rods are 28 to 48 inches, 48 to 84 inches, 66 to 120 inches, and 120 to 170 inches.
How wide should a curtain rod be on a window?
Hanging a curtain rod 3 to 6 inches wider than the frame on each side can make the windows feel larger. It also allows extra light when the curtains are open because the fabric won’t hang in front of the glass. If you want to display the window molding, you can leave 12 inches on either side of the window.
How much to add to a curtain rod?
You can either add 20 percent to your window measurements or add six inches to both sides of the window.
How long should a curtain rod be?
Curtain rods come in four standard lengths. Standard curtain rods are 28 to 48 inches, 48 to 84 inches, 66 to 120 inches, and 120 to 170 inches.
What is the clearance between the back of a curtain rod and the wall?
Clearance is the free space between the back of the curtain and the wall or window. You measure clearance from the back of the curtain rod to the wall or window.
Can you order adjustable rods?
While these options are appropriate for most common window sizes, sometimes it’s best to order adjustable rods. Adjustable rods can accommodate a broader range of window sizes. Ordering custom curtain rods is also an option if you have a unique window size.
What Is The Perfect Pole Pocket Size?
The very first thing to consider is the size of your pockets. Ideally, the pocket should not be wrapped too tightly around the pole, as this could put extra pressure on the pole and increase its chance to break. The perfect size should have plenty of space for the pole to “breathe”, and if there is a V shape at the bottom of the pole pocket, then the pressure is just right, and you can proceed with other tasks. Calculating the pocket size for your banner will have a lot to do with the size of your banner. To simplify, you must first find the circumference of the pole. This is done by multiplying the diameter of the pole by 3.14. Then, divide this number by 2, and you should have the flat pocket size, which is the minimum size for the pole pocket. Since you do not want to let the pole be stressed and give way to cracks, you will have to multiply the flat pocket size by 1.5. This will allow for some room for the pole to breathe, thus increasing its endurance as a whole. If you hate math and would prefer to go for premade settings, there are presets that you can choose from. If your pole is about 40mm in diameter, your flat pocket size should be 100mm. For standard scaffolding pole, which should be about 50mm in diameter, opt for 125mm for flat pocket size. Finally, if the pole is about 60mm in diameter, you will need as much as 150mm for flat pocket size. However, size is not all that matters, as you will soon understand when we reach our next section.
What is a pole pocket?
The pole pocket is the pocket through which the pole is slid through, allowing the banner to be positioned as you will. These pockets are wrapped around the back of the banner and are then heat-welded for the purpose of creating a 4" seam which attaches it to the banner. Pole pockets are most often used on lamp posts and scaffoldings ...
What size should a scaffolding pole be?
For standard scaffolding pole, which should be about 50mm in diameter, opt for 125mm for flat pocket size.
Where to put pole pockets on banner?
You can create a pole pocket in any position of the banner, from the top, bottom, left, right, to both top and bottom, left and right, or even all corners of the banner . This flexibility allows banner creators to have more degree of autonomy when it comes to where to hang the banner.
How big should a curtain rod pocket be?
For example, a 2-inch round pole will require a rod pocket of at least 4 inches, while a 2-inch flat curtain rod will require a rod pocket of at least 2-1/2 inches.
What is a rod pocket valance?
But what is a rod pocket valance? It’s simply a valance that has excess fabric on top that’s folded over to create a pocket for the curtain rod to fully slide through. There are various rod pockets available, but the 3-inch size is most commonly found.
How many times should a valance be gathered on a rod?
You may find that there’s a big gap that doesn’t look good at all. And if your valance needs to be fully gathered on the rod (at least 2.5 times the fullness), you’ll have to find a rod pocket that’s just the right size to fit without problems, while leaving no gaps.
Can you hang a valance on a curtain rod?
Before you can figure that, you’ll need to figure out what kind of hardware you’ll use. The valance can either be hung on a round pole or on a flat curtain rod. The round pole will have a decorative finial on the end, as seen in the first valance picture above (the black and gold arched valance).
Can you put a pocket valance on a wooden pole?
YES – a flat rod pocket valance on a wooden pole.
Do rod pocket valances have thread?
Rod pocket valances are convenient and great for your budget, but there will be a thread running across the valance. This isn’t usually a problem since a workroom should color-match the thread to the main color of the fabric, but there is a solution to this.
