What is seacast software?
Designed specifically for X•Series (Blue Line) instruments, SeaCast software provides an intuitive interface, offering easy instrument setup, data collection and management, and exporting tools. Install SeaCast 4.40 Download Ver. 4.40 Update Having difficulty installing SeaCast or connecting to the instrument? Contact Us Get a Quote for
What is seacast for X series?
SeaCast Software for X•Series Designed specifically for X•Series (Blue Line) instruments, SeaCast software provides an intuitive interface, offering easy instrument setup, data collection and management, and exporting tools. Install SeaCast 4.40
What is seacast made of?
Seacast™ acts and responds like wood but is a superior material. It is made of 35% FRP composite, which contributes to its super strong impact resistance. Seacast™ is lighter then marine plywood but won’t change the balance of your boat and does not absorb water.
What is seacast transom repair?
Seacast™ uses chopped reinforcement recycled fiberglass that provides superior tensile strength in comparison to ceramic spheres. The materials found in Seacast™ are based on the same ones found in the rest of the boat and the hull. Making your transom repair last the lifetime of your boat.
How much does Seacast cost?
SeacastProduct NamePriceBuy Now1 Gallon Seacast™ transom / Stringer Kit$109.95Buy Now5 Gallon Seacast™ Self-Leveling for Decks and floors$202.95Buy Now2 Gallon Seacast™ Self-Leveling for Decks / Floors$154.95Buy Now1 Gallon Seacast™ Self-Leveling for Decks / Floors$109.95Buy Now4 more rows
Does Seacast bond to wood?
Seacast™ is formulated to bond to fiberglass. It will bond to small amounts of pre-existing wood that may remain after extraction, but the bond to fiberglass will be weakened and the remaining wood will continue to rot.
How do you mix Seacast?
PLEASE READ ALL INSTRUCTIONS BEFORE USING SEACAST™Mixing Instructions (In This Order)You will need to mix 3 times in this order.(1) Mix the opened bucket for even.consistency. Settling occurs during shipping. ... (2)Add (BPO) catalyst one tube at a.time. NOT ALL AT ONCE! ... (3) Add fibers. Mix for final 3-4 minutes.More items...
How strong is liquid transom?
CARBON-BOND POURABLE TRANSOM COMPOUND is ceramic filled polyester exhibiting exceptional physical properties. In particular, the compressive strength has been documented by an independent testing laboratory to be 3,895 psi (ASTM 695). This is several times that of plywood and 8 to 10 times that of PVC foam.
Can you fill a transom with epoxy?
Treat any wood left inside with CPES™. Cut new wood and treat with CPES™ and insert into transom, clamp/epoxy-glue it to the back of the transom, fill in all gaps with either the Fill-It™ epoxy filler or a putty-mix of the L&L Resin™, and then re-glass the inside. It's real work.
How strong is sea cast?
Seacast™ is “Green.” It has 35% recycled FRP which gives it “SUPER STRENGTH”. Seacast™ is nearly three times the strength of a marine plywood transom.
How long does Seacast take to cure?
Seacast™ will set in approximately 25-45 minutes. The hotter the temperature is the faster it will set. later at night. Seacast™ will take longer to cure if the temperature is below 76°F, heat lamps may be used to compensate for the lower ambient temperature.
How do you repair a fiberglass boat transom?
1:4037:14[EP11] Fibreglass Boat Transom Replacement From The OutsideYouTubeStart of suggested clipEnd of suggested clipSo firstly traditionally you would go you would remove a transom from the inside you'd cut awayMoreSo firstly traditionally you would go you would remove a transom from the inside you'd cut away everything from the inside that way you can keep the outer hull of the boat.
How do you pour a new transom?
0:0910:47How to: Pouring & Installing a SeaCast Transom - YouTubeYouTubeStart of suggested clipEnd of suggested clipI've also added a C clamp with some bracing some to buy aid. That. Will help shore up this thinMoreI've also added a C clamp with some bracing some to buy aid. That. Will help shore up this thin piece of biaxial. So I pour it I can guarantee that this will not warp.
What is Coosa board made of?
The Coosa Advantage Our specialized panels are constructed with high-density, closed-cell, polyurethane foam impregnated with layers of fiberglass to serve as a strong, reliable alternative to plywood and other traditional unreinforced core materials.
How do I use Arjay 6011?
1. Once mixed, pour buckets of Arjay 6011 into transom cavity, allowing the material to self- level. Fill to the top and scrape flat across top of transom. Note: Pour the whole transom in one pour to eliminate “weld lines” or seams that will occur between a cured pour and fresh pour.
How do you change a transom on an aluminum boat?
2:5025:49Aluminum Boat Transom Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut as you can see these screws. Very filled with paint. And so i had to carefully try to scratchMoreBut as you can see these screws. Very filled with paint. And so i had to carefully try to scratch the paint out of the slot head of the screws. So that i could remove the screws.
How do I use Arjay 6011?
1. Once mixed, pour buckets of Arjay 6011 into transom cavity, allowing the material to self- level. Fill to the top and scrape flat across top of transom. Note: Pour the whole transom in one pour to eliminate “weld lines” or seams that will occur between a cured pour and fresh pour.
How do you change a transom on an aluminum boat?
2:5025:49Aluminum Boat Transom Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipBut as you can see these screws. Very filled with paint. And so i had to carefully try to scratchMoreBut as you can see these screws. Very filled with paint. And so i had to carefully try to scratch the paint out of the slot head of the screws. So that i could remove the screws.
How much recycled FRP is in Seacast?
It has 35% recycled FRP which gives it “SUPER STRENGTH”. • Seacast™ is nearly three times the strength of a marine plywood transom. • Seacast™ is only 3 tenths of a pound lighter than marine plywood, which will not endanger, alter or negatively impact the structural integrity of the boat.
Who invented the Seacast system?
Seacast™ was developed by the late inventor Wolfgang Unger. He recognized the need for a tough, lightweight, durable, and affordable transom replacement system for the marine repair industry. Seacast™ permanently replaces rotten wood and soggy foam from transoms, stringers, decks, and flooring. Note: Self-Leveling Seacast™ is for decks and flooring. Seacast™ is a high strength casting compound combining reinforcements and additives in a proprietary resin matrix. Seacast™ is formulated for heavy duty applications that need strength and durability, i.e. motor mounts. Seacast™ comes in a bucket with premixed resin, BPO catalyst, and premeasured reinforcement.
foca Junior Member
OK, there seems to be a good amount of debate surrounding this seacast stuff. But, not too many testimonials and longterm experiences from people that have used it. So, use it or not use it? where? why or why not?
JR-Shine SHINE
I don’t know enough about the physical properties of the resin to say if its a "good" idea or not .... but I guess what your saying is that no one knows because it has never been tested? The resin might bond better to wood than any other polyester out there, but even that’s not close to as good as epoxy.
foca Junior Member
My thoughts were exact. It seems like you took the sample pretty far. I simply did an imersion test. But bonding is a big question mark in my mind. However, with an exotherm of ~190 deg, this may be more of a "weld" to the old skin. Rather than your standard glue-type bond. what do you think PAR?
foca Junior Member
went out there. Wolfgang was gone, so I did not meet him. Spoke with some of the shop guys. real helpful and nice. great people out there, all around.
JR-Shine SHINE
I wonder what kind of polyester resin (It's polyester right?) the mix is made of. If it is all polyester wouldn’t that make it quite brittle? I think most polyester resins have a very small amount of "flex", so could a quick change in the load on the Seacast transom make it crack.
tja Senior Member
Why don't you just forget about Seacast and do the job the right way with the proper materials. If your replacing a transom in an outboard boat for example remove the deck tear out the rotted wood and put in new wood. If you do it right it will be better then new. Hope I wasn't too direct, Tom
SeagullVolusia New Member
We have had, in the past few months, personnel problems. We will be posting our new website next week - which will have third party tests posted. If there is anyone that needs to view our tests email us at [email protected] or call Toll Free (866)716-4820.
How strong is Seacast?
Seacast™ is almost 3 times the strength of a marine plywood transom. Seacast™ is Green! it has 35% recycled FRP which gives it it's secret strength. Seacast™ is .03 pounds lighter than a marine plywood transom, which will not alter the balance of your boat.
Which is the strongest and only one for pemanent results?
Our Seacast™ is the strongest and only one for Pemanent results.
Does Seacast freeze?
Seacast™ does not crack, creep, rot or freeze at any temperature.
