Full Answer
What is silverboard made of?
SilveRboard is a rigid insulation board made from Expanded Polystyrene (EPS) covered with a layer of polypropylene reflective lamination on both sides. This highly effective combination of materials offers high compressive strength and great thermal performance when used in below grade and under slab applications.
What is silverboard acoustic?
SilveRboard acoustic is a do-it-yourself (DIY) nonstructural, rigid insulation board made from closed cell expanded polystyrene (EPS) with a layer of reflective metalized polypropylene film laminated on both sides.
What is silverboard graphite?
SilveRboard Graphite has a high R-value and an exceptional long-term R-value retention. It also provides increased thermal resistance in lower temperatures. The perforated boards provide high vapor permeance allowing walls to dry out and can act as a second plane of protection when taped and sealed.
What are the benefits of silverboard?
SilveRboard has exceptional long-term R-value retention as well as increased thermal resistance in lower temperatures. When the joints are taped and sealed it can function as a vapor barrier. Each panel is easy to handle due to the low weight and can be easily cut.
How do you use a silver board?
0:071:51SilveRboard Rigid Foam Insulation - YouTubeYouTubeStart of suggested clipEnd of suggested clipBoard silver board is a flat sheet insulation with a reflective lamination that reflects radiantMoreBoard silver board is a flat sheet insulation with a reflective lamination that reflects radiant energy keeping heat outdoors in summer. And holding it in during winter.
What is silver board insulation?
SilveRboard is a rigid insulation board made from Expanded Polystyrene (EPS) covered with a layer of polypropylene reflective lamination on both sides. This highly effective combination of materials offers high compressive strength and great thermal performance when used in below grade and under slab applications.
What is R-value of silver Board?
R- 10SilveRboard R- 10, 2-in x 4-ft x 20-ft Faced Polystyrene Board Insulation. item number 12. it has a rating of 3.7333 with 15 reviews.
Is SilveRboard good for soundproofing?
SilveRboard Acoustic Rigid Insulation It offers great sound attenuation and thermal resistance properties when installed in wall assemblies. The double-sided lamination dramatically increases board strength and flexibility, reducing site damage and waste.
Do you need house wrap with SilveRboard?
No House Wrap Needed SilveRboard XS has been specifically engineered for exterior wall sheathing application on wood or steel frame construction. The reflective laminated surfaces are micro-perforated so that the insulation materials can “breathe,” offering both water vapour permeance and an air barrier.
Which is better EPS or XPS?
XPS, at about R-5 per 25 mm, has only a slightly better thermal performance than EPS. The thermal insulation performance of EPS and XPS in identical densities is quite close. However, EPS with the same level of density is less expensive.
Which board is best for insulation?
Polyurethane (PUR) is one of the most efficient insulation materials on the market. PUR is available in the shape of insulation boards or foam. However, the boards have a better insulation value than the foam variant. Moreover, these boards guarantee a certain thickness in advance and nothing has to be taped over.
What's the best wall insulation?
The best insulation for walls when it comes to new build homes or remodels is going to be Nu-Wool, foam board, or open cell spray foam....Cons:Open cell spray foam is an expensive option for insulation.Spray foam can't be installed as a DIY project.Some brands of spray foam have an odor when installed.
What is the best under slab insulation?
The Best Under Slab Insulation: Prodex. Our expert recommendation for the best under slab insulation is Prodex. It's a new-generation radiant floor insulation that meets all of the challenges of under slab insulation. It blocks cold, heat, moisture, mold and unwelcome creatures.
Is pink foam board good for soundproofing?
Styrofoam is not good for soundproofing. Used by itself as a sound conditioning panel it doesn't do much, however, molded into a quadratic diffuser or laminated to denser material, and it improves sound quality.
Does Styrofoam deaden sound?
While looking for soundproofing solutions for your home or studio, you may have come across styrofoam as a solution. While styrofoam can significantly dampen or cancel out noise when it's paired with denser materials, it doesn't achieve adequate results on its own.
How do you cut a silverboard?
0:222:24How to cut Foil Faced Rigid Insulation Panels R Max - YouTubeYouTubeStart of suggested clipEnd of suggested clipCut right along three is really upsetting the foil is a little bit of foam. What if you're gonnaMoreCut right along three is really upsetting the foil is a little bit of foam. What if you're gonna make a real nice it'll make the next cuts. All based on this one here kid.
Which rigid foam insulation is best?
Polyisocyanurate: Known as polyiso for short, polyisocyanurate foam has the highest R-value per inch (R-6.5 to R-6.8) of any rigid insulation.
What is the best under slab insulation?
The Best Under Slab Insulation: Prodex. Our expert recommendation for the best under slab insulation is Prodex. It's a new-generation radiant floor insulation that meets all of the challenges of under slab insulation. It blocks cold, heat, moisture, mold and unwelcome creatures.
Who makes SilverGlo insulation?
Basement Systems, Inc. announces the launch of SilverGlo insulation board, an innovative rigid foam insulation product. Basement Systems, Inc., a leader in the basement and crawl space industries with dealers in six countries, has recently developed a new insulation product called SilverGlo foam board insulation.
Is XPS foam board flammable?
While the code requirements for continuous insulation help to improve efficiency, they raise another challenge: the foam plastic insulations commonly used for continuous insulation—polyisocyanurate aka polyiso, expanded polystyrene also known as EPS, extruded polystyrene aka XPS and spray polyurethane foam or SPF—are ...
About GPS Graphite Polystyrene Insulation
High performing and cost effective non-structural graphite polystyrene (GPS) rigid insulation board for exterior wall applications on wood or steel frame construction. The expanded polystyrene (EPS) core is embedded with graphite particles which increase the thermal performance, compared to conventional EPS.
Expanded Polystyrene Embedded with Graphite Particles
SilveRboard® Graphite XS can be used as the second plane of protection under exterior cladding when the joints are properly taped and sealed, eliminating the need for an additional membrane. The laminated film comes micro perforated by default (denoted by XS) but is also available without perforations by special order.
Graphite Polystyrene (GPS)
Graphite is the most stable form of carbon. It is naturally occurring and chemically inert. When embedded in the polymer matrix it acts as a reflector of radiant energy giving the material its distinct gray color and improved thermal performance.
Product Benefits
SilveRboard® Graphite has a high R-value and an exceptional long-term R-value retention. It also provides increased thermal resistance in lower temperatures.
Testimonials
Due to its light weight and job site durability, installers can easily handle SilveRboard® which results in a lesser breakage rate compared to other products.
