What is strip planking on a boat?
How Strip planking, also called cedar strip, method of boat construction is done Strip planking of hulls produces beautiful Canoes, dingies and kayaks as well as larger boats. Usually Cedar strips are used. Home My Boats Wood Strip Boats
What kind of planking is used on a boat hull?
Strip planking of hulls produces beautiful Canoes, dingies and kayaks as well as larger boats. Usually Cedar strips are used. Home My Boats Wood Strip Boats
Where to start strip planking?
It is normal to begin the planking from the sheer and work upwards. However, strip planking can be started from the keel depending on the particular design. Planking which runs parallel to the sheer will look better if the boat is to be finished with the wood showing. And even when painted the planking run off might become visible with age.
Why speed strip planking system?
Speed Strip has been successfully used to build mono-hulls and multi-hulls up to 200 feet in length. Speed Strip Planking System utilizes a unique, interlocking tongue-and-groove profile.
The Strips
When strip planking first began to be used the strips were plane cut either square or oblong in cross section.
The Molds
Unlike traditional boat building methods strip planking is done upside down on a jig.
Nailing
If you are using epoxy glue when strip planking then nailing is not necessary.
Gluing
Whether or not you use glue between the planks will depend on the design, the type of wood and the skill of the builder.
Finish
Having completed the planking the business of faring will smooth out any ridges.
Conclusion
There are many advantages for the backyard builder with this method of building.
The Strips.
Length Ofstrips.
- Using full length strips mightresult in a stronger construction. However, building with shorterstrips will beeasier. The ends of the strips willrequire some tapering and aprecision fit. It will be easier to shape theend strips separately thenfit a piece in between. Joints can be simple butts solong as the joints ofsuccessive strips are staggered.
nailing.
- If you are usingepoxy glue when strip planking then nailing is not necessary. However, nailing will help tohelp to hold the planks inplace and reduce the amount of clamping needed. Normally nailing will be donevertically through thestrips. Thin gauge nails arecountersunk and driven across threestrips. Nails should be staggeredacross each three strip courseby about six inches. Nailing …
gluing.
- Whether or not you useglue between the planks will depend on the design, the type of wood andtheskill of the builder. The most hyped method ofgluing is withepoxy. However it must be remembered thatepoxy ishard, unyielding and expensive. Using a more flexible compoundwill allow for swellingand movement. With so much gluing to bedone, glue drip can causeproblems …
Finish.
- Having completed theplanking the business of faring will smooth out any ridges. With woods such as Cedar youwill have to be careful asit is easy to fair away too much. Because Cedar is relativelysoft it will need sheathing,other woods may not. Sheathing with wovenglasscloth and epoxywill allow thenatural wood to show through. Once the shell is finished theouter component…
Conclusion.
- There are manyadvantages for the backyard builder with this method of building. However, strip planking is arelatively slow method ofbuilding despite the reduction in framing needed. Where a hull is sheathed withglass and epoxy inside andout it effectively becomes a core construction. Core constructions are bynature strong. However wood is not the idealcore material as it isporo…