The six simple steps (for paint or stain finishes) include the following:
- Set-up the work area. Place a tarp down on the drive-way or in the garage. Be sure to set up the work area in a space with plenty of air circulation.
- Choose your finish. Gel stain or oil-based paint work great for pine wood, unless it has been pressure-treated. ...
- Sand the wood. ...
- Prime the wood. ...
- Finish the wood. ...
- Seal the wood. ...
Full Answer
What is the best paint to use for pine furniture?
Chalk Paint™If you're looking for the best paint to upcycle pine furniture, look no further than Chalk Paint™. Annie Sloan first developed this brand of furniture paint in 1990 specifically to go over surfaces like varnished pine without the need for priming first.
What kind of paint do you use on pine wood?
Honestly, there is no special paint for pine wood. You could use any kind of paint especially since it is primed already. I have used oil based, chalk type paint and latex paint with equal success. They each have their advantages but I primary use latex paint for my furniture.
How do you prepare pine furniture for painting?
Before you paint pine furniture, sand it to remove the previous layers of finish while opening up the grain in the porous wood. Then, prime your furniture with a stain-resistant primer. After your furniture is sanded and primed, you can paint it with a brush and roller.
Can you paint straight over pine wood?
You can paint over treated pine, but manufacturers of treated lumber suggest you leave the wood dry for about a year before painting. After the wood is installed, leave it to dry for a few months, then prime and paint. It takes several coats.
Can I paint pine furniture without sanding?
Chalk paint is the best way to paint practically anything without sanding. It offers a gorgeous matte finish and no need to prepare the surface. Annie Sloan's Chalk Paint was the cornerstone of the painted furniture industry as we know it.
Do I have to Prime pine before painting?
Omitting the Primer If you don't seal pine with a primer, the first coat of paint will be blotchy, because pine absorbs paint (and other finishes) very unevenly. Moreover, the water in the paint will raise the grain, especially around knots.
How do you seal pine wood before painting?
1:302:32Priming Bare Wood For Easy Painting - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou want to use an oil-based primer that will seal up the chemicals in the SAP. And make it so yourMoreYou want to use an oil-based primer that will seal up the chemicals in the SAP. And make it so your topcoat.
Can you paint over varnished pine?
You can paint over varnished wood as long as you use the right materials and painting process. The best paint to use is a water-based acrylic one. If you're using an oil-based paint only use an oil-based primer, not an acrylic one. “Sweet, this means it can be done!
How do you paint a pine dresser?
3:458:13How To Paint Modern Pine - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd here's another little tip for you use a bristle brush to get into all those little nooks andMoreAnd here's another little tip for you use a bristle brush to get into all those little nooks and crannies that there may be dust from sanding. And then wipe it clean with a damp cloth.
What happens if you don't prime wood before painting?
What happens if you don't prime bare wood is not pretty. Similar to new drywall, raw wood soaks up paint like a sponge. As a result, your surface will look blotchy since pores in the woodwork unevenly absorb the paint. More importantly, the painted wood will likely peel in two or three years without primer.
How do you restore old pine furniture?
Rub the item of furniture with fine sandpaper in the direction of the grain – to remove any varnish or build up of dirt and grease. Fill any scratches or holes with a wood filler specifically designed for pine – it should match the colour of your furniture. Re-apply varnish or wax/oil coats according to preference.
How do you paint pine varnished furniture?
3:2515:11How to Transform Old Pine Furniture in One Day - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere's got that sort of solvent-based varnish coating all over the top that we can't reapply paintMoreThere's got that sort of solvent-based varnish coating all over the top that we can't reapply paint straight onto it it will not bear to adhere to the surface very well.
How do you get a smooth paint finish on pine?
1:013:53How To Apply A Painted Finish On Wood | Rockler Skill BuildersYouTubeStart of suggested clipEnd of suggested clipFirst soak the brush in the finishes solvent in this case its water then dip the brush into theMoreFirst soak the brush in the finishes solvent in this case its water then dip the brush into the primer about one-third of the way tip. Off any drips.
How do you paint bare pine wood?
Steps for Painting Bare WoodStep 1: Sand the Surface. It may seem unnecessary to sand bare wood before painting, but stock lumber is often coated in a glaze to help protect it. ... Step 2: Seal the Knots. ... Step 3: Smooth the Surface. ... Step 4: Consider Tinted Primer. ... Step 5: Choose the Right Base for your Color.
How do you paint finished pine wood?
3:028:13How To Paint Modern Pine - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo I could work on the table area. And lined off my doors. And my drawers. They've made a muchMoreSo I could work on the table area. And lined off my doors. And my drawers. They've made a much easier to paint Here I am using my sanding block again always sand with the grain of the wood.
How do you cure pines before painting?
1:302:32Priming Bare Wood For Easy Painting - YouTubeYouTubeStart of suggested clipEnd of suggested clipFor example with this knotty pine wainscoting. The problem with knotty pine is the knots. Which haveMoreFor example with this knotty pine wainscoting. The problem with knotty pine is the knots. Which have SAP in them and various chemicals which will bleed through a typical latex paint for this situation
What paint should I use for a dresser?
Select your color based on your personal preferences. Choose between a gloss, semi-gloss, or flat paint. You can use oil-based, alkyd or latex paint. If you’re painting a furniture item that you touch frequently, like a dresser or table, choose an alkyd-based paint. Latex paint will rub off more easily over time, especially if the furniture is being used regularly. For decorative pieces, latex will hold up just fine.
How to sand pine?
Sand your pine with 120-150 grit sandpaper. Purchase a sanding brick or attach a sheet of 120-150 grit sandpaper to a belt sander. Run your sandpaper firmly across every surface of your furniture to pull up the porous wood, remove debris and splinters, and make it easier to paint. [3]
How to sand furniture to make it uniform?
Sand again using 200-220 grit sandpaper. Use the same method that you used to sand your furniture the first time to ensure that your wood grain remains uniform. Sand your furniture lightly with your brick or sander to remove smaller blemishes and smooth out minor scratches. Sanding twice will make it easier for the primer to bind with the wood, which will make the paint more uniform and permanent when you apply it.
How to sand brick furniture?
If you’re using a belt sander, guide it carefully over the furniture. If you’re using a sanding brick, use light back-and-forth strokes. Work in the direction of the grain.
How to leave painter's tape on wood?
Place a piece of painter’s tape against the edge that you’re going to leave unpainted and press it down as you roll the tape along the edge. Press down on a strip of painter’s tape to ensure that the adhesive is smoothed out against the wood.
How to clean splinters off wood furniture?
Brush your furniture with a dry, clean paint brush. Wipe off the remaining wood dust and splinters by brushing your furniture with a standard paint brush that has never been used. Brush freely and firmly to wipe all of the debris on to the ground or drop cloth.
What to wear when working with oil based primer?
Wear a respirator or dust mask if you’re working with oil-based primer. The fumes are a lung irritant.
What is the best paint for furniture?
This Rust-Oleum Gloss Furniture Paint is the best paint for furniture on a multitude of surfaces and there is no need to prime or sand down the furniture before application. It’s highly concentrated, meaning a little goes a long way with this paint, and you’ll find it’s slightly shinier than the standard satin paint. It comes in a wide range of bold colours such as black and grey – perfect if you love dark and atmospheric interiors.
What is the best paint to use for chalk paint?
If you love the look of chalk paint but need a more durable solution, you can either seal the paint with a wax or polyurethane, or opt for a more durable paint in a matte finish. Acrylic paints are typically more durable than chalk paint.
What is the difference between matte and gloss paint?
The finish of the paint you choose will impact both the look and the function of your furniture. Gloss paints feel more contemporary, while matte paints are suited for farmhouse or shabby-ch ic decor . Satin or semi-gloss finishes are versatile enough to suit any design style.
How long does it take for a paint coat to dry?
There's no need to sand or prime your surface beforehand, and one coat takes only two hours to dry, so you'll be able to use your updated piece of furniture in no time. Definitely the best furniture paint if you are after really quick results. 7.
Is eggshell paint wipeable?
As far as function goes, gloss, semi-gloss, and eggshell paints are wipeable and easier to clean than matte, flat, or chalk finishes. Different paints come in a different range of finishes, so you'll want to look for one that offers the level of sheen you want, or be prepared to add a sealer or topcoat to achieve it.
Is chalk paint a good paint?
If you're looking to do a simple refresh on a piece that's in good repair, and don't want to spend a ton of time on your DIY project, chalky paint is the quickest, easiest way to go. That's because chalk paint doesn't require a sanded or primed surface (although you'll often get longer-lasting results if you complete those steps), or a sealer.
Can you seal chalk paint?
If you love the look of chalk paint but need a more durable solution, you can either seal the paint with a wax or polyurethane, or opt for a more durable paint in a matte finish.
What Paint To Use On Pine Furniture
Choosing paint to use on pine furniture all comes down to personal preference. You can use chalk paint, satinwood, eggshell, gloss or even matt emulsion if you use a good quality primer and a protective finishing wax.
Do You Need To Use A Primer On Pine Furniture?
Whilst many DIYers are happy to just apply their paint to pine furniture we’d recommend using a primer first. Pine is a softwood which means it’s more porous than other surfaces. A primer is able to absorb into pine whilst still leaving enough matter behind for your topcoats to adhere to properly.
How To Paint Pine Furniture
Painting pine furniture is a relatively simple task if you know what you’re doing. Follow the steps below to transform your furniture:
How to get rid of pine sap on wood?
Fortunately, where there is a will, there is a… Well, a way of course! Treating your unfinished pinewood with a light coating of ben zol will help mitigate the oozing sap. Once it is evenly distributed all over you can sit back whilst it dries. Remember, when it has dried, wipe down the surface again with a different cloth. Not only will it eradicate the last bits of the sap from the wood, but it will also take away the darker areas where the knobby knots are.
What do you wear when working with primer?
One last word for the wise if you are working with primers, paints, sealers, or whatever, you might want to wear some protective gear in the form of a respiratory mask, an eye mask, and some protective gloves. This helps to keep you from breathing in any of the toxic fumes that might occur from the chemicals in the product’s formula. Your safety is our highest priority.
Why do you sand down paint after it has dried?
It is recommended to sand down each layer of the paint after it has dried, to rid the surface of any bums formed from painting over dust particles. This will level up the quality of your paint job.
Is pinewood primer a two in one product?
What makes this product amazing is that it is a two-in-one formula, meaning, it is both a primer and paint in one canister. This means you will not have to purchase two products and wait for the one to dry. Painting pinewood has become ten times easier with this invention. It saves you a lot of effort and time, and time is valuable.
Can you paint pine wood?
This makes things far accessible. You do not have to keep pine’s origin color , in fact, pinewood is lightweight and easy to paint, making it easy to work with when painting pine furniture. If you choose the option of painting pinewood, you have the ability to use your creative freedom to change the look and style of your furniture to suit any room. This article will explain in detail, how to paint pinewood, including what to do with unfinished pine, as well as the best paints to use for the task.
Is pine wood easy to find?
Just because pinewood is an easy timber to find does not make it an easy timer to work with. If you are wondering how to paint pinewood, then you are on the right page. Painted pinewood is one of the most versatile things to add to your home, office space, workshop, cafe, or whatever you need. The origin of this hardwood is in its name, a Pinetree. Even though it is listed as hardwood, it is actually rather soft, making it a tricky wood to work with. But, its softness does make it a perfect candidate for carving intricate details.
Can you use a power sander to sand pinewood?
When sanding down the edges of your pinewood, only sandpaper should be used. A power sander will be too out of control for neat edges to be achieved.
What do you need to do before painting furniture?
Before you start out on a painting journey, make sure you have filled any pocket holes and imperfections with wood putty and sanded your unfinished wood furniture smooth. Sanding is my least favorite part of building furniture but unfortunately, it is also the most important!
How to make wood furniture last longer?
Sealing painted wood furniture. The last step to making your furniture last is to seal the paint with polyacrylic. It is best to use water-based polyacrylic to preserve the color of your furniture. My love using the satin sheen.
How to sand poly?
Apply a couple of coats of poly. Between each coat, make sure to sand with 300 grit sanding paper or sanding sponge and wipe away all the sanding dust.
How to seal knots in wood?
The best way to seal knots in wood. Start by covering up the knots with wood putty. This will force all the little cracks and crevices to fill up with wood putty. Once dry, sand away the extra wood putty. Try to leave a thin layer of wood putty over the knot.
How many coats of primer do I need to cover knots?
Next, cover the knots with a Shellac based primer using a disposable chip brush. You will need at least 2 coats. I like to cover only the knots and have found it to be sufficient.
What are the problems with unfinished wood furniture?
The main problem with unfinished wood furniture is the knots. If you build your own furniture, you know that you need to find lumber with the least knots. Unfortunately, you can never completely eliminate them… not if you want to stay on a budget anyway.
Can I use water based paint on a sprayer?
I love using water-based latex paints because they are so easy to handle and clean up and I can use my paint sprayer to paint very quickly. Most of my projects use only 1 sample pot of paint and it is great to keep costs down.
How long between coats of chalk paint?
Always check your tin for instructions on time between coats which is usually only a couple of hours with chalk paint, and also rate of coverage. Applying paints too thinly can lead to issues further down the line. With chalk paint, there are an endless number of finishes you can create.
What is chalk paint?
Chalk paint is a type of paint that can be used on furniture, toys and so much more. It has quickly become synonymous with shabby chic, allowing painted furniture to be easily distressed but is equally easy to use for a smooth, sleek look.
How long does it take for furniture wax to dry?
Treat your finished piece with extra care while the wax cures and hardens. This can take up to 21 days.
How to get rid of grease stains on paint?
Once sorted, you can get on with the simple preparation prior to painting. Scrub with sugar soap to remove any grease, silicone polish or grime that has accumulated over time. Be thorough.
How to remove grease from furniture?
Scrub with sugar soap to remove any grease, silicone polish or grime that has accumulated over time. Be thorough. Rinse and allow to dry. Give the whole piece a light hand-sand sufficient to abrade the surface, wipe off any dust and away you go! Oh and take a “before” photo of your piece of furniture.
Can you use a flat brush to paint pine?
If you’re going to be painting your pine furniture piece with chalk paint, you may find that standard DIY brushes are not the best choice. Oval brushes are specially formulated for chalk paint pick-up and can really help achieve a smooth finish. Alternatively, a soft flat brush is a good option.
Can you paint pine with chalk paint?
What’s great about pine is that it takes well to paint. What’s better about chalk paint is that it can stick to just about any surface – all different types of woods, metal, laminate and even concrete. With that in mind, using chalk paint for pine projects is a great way to give it a new lease of life and transform it into something unique.
What color should I paint pine furniture?
Mustard might make your pine look more yellow than you want. I think you might want to start with a very light cream or beige-cream. You have several creams and grays in your idea books. You will probably need to buy some sample jars and paint parts of walls and next to some of your pine furniture. Look at the colors at different times of the day and in different light. Nothing beats having a sample of the real thing. Sometimes computer monitors don't give quite the true color.
What color sea salt goes well with pine?
Pine is warm and grays are cool so I am not thinking that is the best way to go, but you can always buy a sample size jar and see what you think. A blue with a gray undertone might work. I have seen Sherwin Williams Sea Salt work with well with different wood tones. I have natural oak floors and a lot of pine and natural oak furniture. I like a creamy beige - just enough color to set off my white trim.
What color goes well with BM abalone?
BM Abalone will work nicely with the golden pine tones. JudyGDesigns, Rodeo is still on the list of possibilities, but it's true I really do prefer grays to beiges, creams and whites. However, I realize that gray is cooler and our room is warmer. I do love the idea of Abalone.
What color should I use for a Benjamin Moore owl?
Ideally, I'd love to go with Benjamin Moore's Gray Owl. Or a similar shade of gray. But if everyone thinks that still too cool with the below wood shades, I'll probably go with just a lighter shade of beige.
What color are the curtains on a coffee table?
The coffee table is pine, the kitchen table is pine, and table under the window is pine. Curtains are black and white check. We live in the woods, so I'd prefer a lighter color. The more light we can give to the room, the better. The kitchen counters are black and the cupboards are white.
