Cost of Concrete Driveway
| Concrete Driveway Costs | Zip Code | Sq. ft. | |
| Basic | Better | Best | |
| Concrete Driveway – Material Prices | $375.00 - $437.50 | $462.50 - $525.00 | $550.00 - $650.00 |
| Concrete Driveway – Installation Cost | $1250.00 - $1275.00 | $1500.00 - $1575.00 | $2250.00 - $2900.00 |
| Concrete Driveway – Total | $1625.00 - $1712.50 | $1962.50 - $2100.00 | $2800.00 - $3550.00 |
What is the average price of a concrete driveway?
The average is just above $3,000, or $6 per square foot. Factors like location, size, decorative elements, potential reinforcement, and removing the existing surface can all influence that range. A simple concrete driveway ranges between $4 and $7 per square foot.
How much does it cost to build a driveway?
The national average to build a gravel driveway is $1,000 to $3,000, with most people spending around $1,750 on a 24’ x 24’ two-car gravel driveway topped with decomposed granite. On the low end, it costs $300 for a 12’ x 24’ single-car driveway topped with crushed stone.
What is the average cost to repair a driveway?
To confirm the integrity of a concrete driveway, hire a professional to address significant surface issues. The average cost to fix a concrete driveway ranges between $500-$1,100, with the average homeowner spending $800 to resurface a 250 square foot area, including labor and materials.
How much does it cost to install a concrete sidewalk?
A concrete sidewalk costs $20.20 per foot on average. Materials cost about $11.20 per foot and labor costs about $36.00 per hour. Additives like color, stamping, and unique aggregates can raise the price of your concrete sidewalk to $30.00 or more per square foot.
Is it cheaper to pave or concrete a driveway?
The cost of an asphalt driveway is typically cheaper than concrete, costing $2.00 to $4.00 per square foot. Asphalt prices tend to fluctuate with fluctuations in crude oil prices. In contrast, a concrete driveway costs between $4.00 and $6.00 per square foot for a standard installation.
Is a concrete driveway worth it?
The combined strength and longevity make concrete a relatively good value for large areas of paving. As a driveway surface, concrete is more expensive than gravel and asphalt, but it is considerably less expensive than a driveway made with brick, cobblestone, or concrete pavers—and it typically outlasts all of these.
How much does it cost to pour a 24x24 slab of concrete?
A typical 24x24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.
What is the cheapest type of driveway?
Aggregate, or gravel, is the cheapest and most durable of these four common driveway materials.
What type of driveway lasts the longest?
Concrete DrivewaysConcrete Driveways Concrete is one of the most popular driveway materials. It's an exceedingly durable surface that can withstand more wear and tear than other choices. You can expect your poured concrete driveway to last 25 to 50 years when well installed and well cared for.
What is the best type of driveway to have?
Concrete. Among the most durable options on the market is a concrete driveway surface. Although it provides a hard and stable surface, that is highly dependant on professional installation, high upfront costs, maintenance, and weather conditions.
Will concrete prices go down in 2022?
Linesight's latest Quarterly Construction Materials Costs report shows that higher prices seen in 2021 are set to continue throughout 2022.
How thick should a concrete driveway be?
four inches thickAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.
How much concrete is in a truck?
Concrete trucks weigh an average of 25,000 lbs. by themselves and up to 40,000 lbs. when carrying a full load. Their capacity is around 8 cubic yards, but can be up to 10 cubic yards if fully-loaded.
What is the best low maintenance driveway?
Low-Maintenance Driveway OptionsPaving Stones. Paving stones are known to last up to a full century if properly laid. ... Concrete Grass Pavers. An interlocking concrete grass paver driveway made may be an option for your driveway. ... Plastic Permeable Pavers.
How do I make a budget driveway?
20 driveway ideas on a budgetBrick. Installing bricks on the driveway is one of the best options for shorter driveways. ... Grated asphalt. ... Tar-and-chip. ... Edged stones. ... Concrete. ... Pavers/Block paving. ... Cobblestone. ... Permeable driveway.More items...
Which is better concrete or pavers driveway?
Paving stones are more durable than concrete and can withstand more pressure per square inch. Whether you use cement pavers or want stone driveway paving, paving bricks and stones are typically stronger than concrete and can hold more weight on the surface before a crack shows up.
How long will a concrete driveway last?
25 to 30 yearsThe average life of your concrete driveway will depend on installation methods, environmental conditions and temperatures. However, you can expect your surface to last anywhere from 25 to 30 years with proper care. The key to prolonging the life of your investment is to pay attention to wear and tear each season.
Does having a driveway add value to home?
Asphalt, concrete, and block paving driveways are the ones that can increase the value of your home the most. It's simply because these are the most durable and sturdy materials. They can resist the elements and require minimal maintenance.
Is asphalt or concrete better in the winter?
Concrete deteriorates with salt use, which is spread on roads to melt snow and ice. Asphalt is not affected by the cold and does not deteriorate from salt use. Asphalt pavement absorbs more heat from the sun causing snow and ice to melt much quicker than concrete.
How long does a concrete driveway need to cure before driving on it?
Do not drive on the concrete for the first 7 days. Leave the warning tape in place to let delivery vehicles and others know that they need to stay off your concrete. After One Week – After 7 days, it's OK to drive on your new concrete with normal passenger vehicles.
How much does a 2 car driveway cost?
x 40′ ft. that equals 640 sq. ft. with a a minimum of 1/8 inch per foot slope for drainage will cost you $3,840 – $4,480 or $6-7.00 per square ft.. This would be on the low-end.
How much does it cost to remove a driveway?
Existing driveway removal – This normally runs in the neighborhood of . 50 – $1.50 per square foot. This involves the use of heavy equipment, such as: Jack hammers, Bobcats, etc.
When to get contractor pricing?
Try to get prices in late Fall, early winter – you should expect aggressive pricing discounts by waiting for a contractor’s down season.
Can you install concrete driveways?
Installing Concrete driveway isn’t an easy task to perform and can leave you with a sore back. You might find it more cost effective to hire a landscaping or, mason company to perform the work for you. Landscaping or, mason companies will most always get better prices on Concrete driveway — saving your back and additional costs, so shop around, ask your neighbors if they can recommend someone.
How much does labor cost for a concrete driveway?
Labor makes up nearly half of concrete driveway costs. If the average price is $4 to $7 per square foot, then labor usually makes up about $2 to $3 per square foot , and concrete costs make up the rest. Laborers will prepare the site, build the concrete forms, add rebar if needed, lay the concrete, then smooth it out.
What factors affect the cost of a concrete driveway?
Size and thickness are the primary factors that influence concrete driveway costs. The larger the driveway, the more material is required. A traditional rectangular driveway will cost less than a stylized one, like a curved driveway with brick pavers along the edges.
What causes a driveway to be damaged?
Location, seismic activity, large tree roots, extreme temperatures, age, and construction affect how long a driveway will last and can cause several kinds of damage to your driveway. If that happens, a reliable contractor can help remove and replace the driveway. Advertisement. Photo: depositphotos.com.
How are prices determined for labor and materials?
Prices for labor and materials are determined by geographic location. Urban areas tend to have higher labor rates than other areas, and the time of year can also affect the cost. Some regions have climates that prevent year-round concrete driveway installations, so demand and expenses may increase during the regular season.
What is a driveway made of?
Most driveways are made of concrete or asphalt, depending on the region you live in. Concrete driveways are a popular choice due to their low cost and long lifespan. If you’re budgeting for concrete driveway costs, check out these three types of concrete.
What is a concrete apron?
Concrete Driveway Apron. Most municipalities require a concrete apron to connect a driveway to the road. It’s typically the same width as the driveway and includes where a sidewalk is built. Often, this apron is built when a developer prepares a new housing development, as it’s cheaper to do all at once.
How thick is a concrete driveway?
Most concrete driveways are 4 inches thick, but you may need to increase the thickness to withstand the extra weight if you have heavy vehicles or equipment to park. In general, concrete is sold by the cubic yard. The average concrete cost per yard is $125 to $150.
How Much Does It Cost to Install a Concrete Driveway Near You?
For example, a higher-end price for a 576 square foot driveway in Los Angeles costs a few hundred more than suburban Ohio, according to HomeAdvisor’s calculator. Material costs and labor vary by location, making this something to consider when estimating concrete driveway costs.
How much does a driveway cost?
You may find your driveway is one of the following, though driveways come in all shapes and sizes. Keep in mind that concrete costs from $4 to $15 per square foot. Project totals are often in the range of $2,340 and $7,500 (including removing existing concrete), but it’s not unusual to have projects cost up to $10,000 depending on the dimensions of the driveway.
How much does it cost to pressure wash a concrete driveway?
If your driveway is just looking a little dirty, you may opt for a pressure wash which only costs between $80 and $220. With regular maintenance and upkeep ( especially in the winter months ), concrete driveways can last decades. You might even consider the cost to seal a concrete driveway, either DIY or professionally.
How deep should a driveway be?
Not all driveways are created equal when it comes to depths, finishes, and other features. For example, a typical driveway is 4 inches deep, but if you want your driveway to hold heavier vehicles, you may upgrade to a 6-inch depth. In addition, a standard driveway, as priced above, is a different rate than a stained or stamped driveway, which can increase the per square foot rate by a few dollars, and sometimes even double it. But for many, this extra cost is more than worth it because staining or stamping your driveway can leave it with a beautiful finish that will up your curb appeal substantially.
How much does it cost to stamp a driveway?
This add-on can bump the cost to $15 per square foot, dramatically increasing the total project cost.
What are the factors that affect the cost of a driveway?
The depth and finish of your driveway are just two of the many factors that can impact costs. We've outlined all factors to consider below.
Is it cheaper to hire an independent contractor?
While you may initially think it’s much cheaper to use an independent contractor or friend of a friend, in the long run, you might benefit more from a true professional who can take the job completely off your hands. Hiring a precise, skilled, and reputable contractor takes a bit of upfront research.
How much does a concrete driveway cost?
A simple concrete driveway will vary somewhere between $4 and $7 per square foot. That consists of about $3 to $4 per square foot for products and $2 to $3 per square foot for labor. A strong blend with 5,000 or more pounds per inch strength leaves you at the higher end of that range.
How much does it cost to put stamped concrete in a driveway?
Setting up stamped concrete will cost somewhere between $8 and $15 per square foot. This alternative enables you to include patterns and texture in your driveway. You can mark the material to seem like inlaid stone, tile, and even strong marble.
How much does it cost to replace a driveway?
Replacing your driveway will cost somewhere between $2,200 and $7,500. That consists of both the rate to get rid of the existing concrete (which costs about $540 to $1,510) and the brand-new setup cost of anywhere from $1,800 to $6,000. The specific rate depends upon the size and kind of cement.
What factors affect the price of a concrete driveway?
The vast ranges throughout this article are mostly due to the many elements that can affect the price of your concrete driveway. Style, products, labor costs, and the location and environment in which the setup happens all contribute.
Driveway Costs
A new driveway can add some curb appeal and more. It comes with a cost and a commitment for a few days to get the project done. A driveway costs between $1,700 to $7,000 for materials and averages $4,500. Expect to pay between $2 and $15 per square foot for materials and installation.
Driveway Cost Per Square Foot
The cost of a driveway will depend upon the condition of your current driveway, its size and the material you want to use. Gravel is the cheapest material to use at just $1 to $3 per square foot while a heated driveway is the most expensive at $12 to $18 per square foot.
Driveway Cost by Material
A gravel driveway is the cheapest way to go and it’ll last more than 100 years with regular maintenance. But it’s not attractive to every homeowner and tends to kick up dust on vehicles. Concrete driveways remain a low-cost option because they come in slightly cheaper than an asphalt driveway and often require less maintenance.
Driveway Construction Cost
Building a driveway will cost around $3 to $12 on average, depending upon the size of the driveway and the selected material. Expect to pay as much in labor as you do for materials. Labor costs can increase if the driveway needs leveling, too.
When to Build a Driveway
Depending upon your climate, summer is likely the best time to build a driveway. Plan when there are a few clear days of moderate temperatures. Installing an asphalt driveway is dirty work and you need a few days of clear skies to get it done.
How much does it cost to pave a driveway?
Paving an asphalt driveway costs $4,562 on average, with a typical range between $2,856 and $6,313. This project runs $7 to $13 per square foot, including $2 to $6 per square foot for materials and $5 to $7 per square foot for labor. If you need replacement, you’ll pay $8 to $15 per square foot. Although driveways are the most common use of asphalt in the home, other applications include:
How much does it cost to install an asphalt driveway?
dollars on 2017 (6,649 U.S. dollars). The cost to install an asphalt driveway could be between $2,300 and $10,300 and typically the cost is calculated per square foot.
How much does asphalt cost per ton?
You’ll notice that most asphalt manufacturers sell new material on a per ton basis, averaging $100 to $200 per ton . One ton material usually covers 40 to 80 square feet. The quantity you need depends on the thickness of the layers such as a 2 inches thick would cost 80 square feet per ton while 4 inches think would cost 40 square feet per ton.
What is asphalt driveway?
It is also known as blacktop due to its color, asphalt is a mixture of stones and sand, bound together with materials left over during the production of Petrochemicals such as Pertol, Diesel and Gasoline.
How much to put gravel under asphalt?
If you’re building a driveway where none existed, budget about an extra $2 to install a layer of gravel beneath the asphalt.
How much does concrete cost?
Basic, construction-grade concrete costs about $5 to $12 per square foot , including installation. If you opt for more fancier, decorative versions such as stamped or colored concrete, then prices go up by few dollars per square feet. However, high-end concrete could cost as much as $15 per square foot.
Do driveways need to be resealed?
Low maintenance – Concrete driveways don’t need to be resealed as often, particularly in mild climates.
How much does it cost to install a concrete driveway?
Concrete driveway. Installing a concrete driveway costs $2,400 to $4,800 on average or $4 to $8 per square foot for plain gray concrete. Adding decorative colors, borders, stamped patterns, and finishes costs $8 to $18 per square foot. Concrete lasts 30 to 40 years and handles hot climates better than asphalt.
How much does it cost to build a driveway?
The cost to build a driveway ranges from $600 to $18,000, depending on the material. The cheapest driveways cost $1 to $3 per square foot for gravel, while standard concrete and asphalt driveways cost $3 to $8 per square foot.
How long does a concrete driveway last?
Asphalt driveways last 15 to 30 years, and concrete driveways last 30 to 40 years on average, depending on the climate and usage. Brick and stone pavers last 25 to 50 years. A cobblestone or gravel driveway lasts up to 100 years if well-maintained.
What is the cheapest driveway material?
The cheapest driveway material is gravel at $1 to $3 per square foot using aggregate made of crushed shells, crushed concrete or asphalt, or pea gravel . Tar and chip seal driveways are the second cheapest at $2 to $5 per square foot.
How much does gravel cost?
Well-built gravel driveways require light raking and new gravel once or twice a year. Gravel prices range from $10 to $50 per ton, depending on the stone size and type.
How much does an exposed aggregate driveway cost?
Exposed aggregate or pebble finish driveways cost $5 to $11 per square foot or $3,000 to $6,600 on average. Exposed aggregate features stones mixed into concrete or seeded on the surface. Natural aggregates provide a textured, nonskid surface in various colors, including pastels, earth tones, and deep reds and blues.
How much does a chip seal driveway cost?
Chip seal driveways cost $1,200 to $3,000 or $2 to $5 per square foot. Chip seal, also called tar and chip, lasts 7 to 10 years. Tar and chip driveways have the durability of blacktop, come in various colors, and feature layers of stone aggregate spread over hot liquid asphalt.
How to Calculate Concrete Cost per Yard
To price concrete per yard, multiply the overall square footage of the area by how deep the concrete will be and convert it to cubic yards. If a 10-foot by 10-foot area will have a depth of 6 inches, that equals to 100 square feet multiplied by 0.5 feet for a total of 50 cubic feet.
Factors In Calculating Concrete Cost per Yard
How much is a yard of concrete? That depends on several factors. Prices can differ from the national average due to concrete type, psi rating, delivery distance fees, delivery day, labor costs, and geographic location.
Additional Costs and Considerations
When asking the question “What is the price for concrete per yard?” homeowners should inquire about any additional costs and considerations that can add to the overall project price. These can include short-load fees, concrete prep and installation, concrete removal, landscaping, and additional customizations.
Types of Concrete
How much is a yard of concrete? That depends on the type. There are four specific types of concrete, each with its own characteristics, benefits, and price ranges.
Benefits of Installing Concrete
Concrete can be used in all types of projects. It’s durable, fire- and water-resistant, and low-maintenance. Homeowners who choose to use concrete in and around their home can enjoy many benefits.
Concrete Installation: DIY vs. Hiring a Professional
It may be tempting for homeowners to install concrete on their own to save money on labor costs, but concrete installation is a difficult DIY project. Concrete requires specialized tools and machinery for proper installation.
How to Save Money on Concrete Cost per Yard
Budgeting for concrete cost per yard can be daunting, and the additional costs associated with the project can quickly add up. Opting for the cheapest type of concrete is one way for homeowners to save money, but there are other ways to save without compromising on quality and the desired features.
How much does it cost to raise and level concrete?
While the price for each job varies, a good rule of thumb is that raising and leveling concrete is usually around 50%-80% less than cost of replacement! So in example a typical $4,000 concrete driveway replacement may cost around $800 – $2,000 to raise and level. Keep reading to get a better idea of what your concrete project may cost.
How many visits to replace a driveway?
A typical replacement of a driveway requires a minimum of four visits. First to give the estimate, second to demo and set forms, third to pour and finish the concrete and finally fourth to remove forms and clean site. This is really true for any concrete project.
What materials are used to raise concrete?
Materials such as sand, cement, and limestone will reduce the cost of the job but the repair may not last long. Ensure that only geotechnical polyurethane specifically engineered for raising concrete is being used. Anyone who tries to sell anything else and claims it’s the best is either misinformed or being dishonest.
How long is a concrete leveling warranty?
However, if the company doing the work only offers a 1-2 year warranty or no warranty at all, those saving will be short lived if the work will need to be redone a few years later.
How much does it cost to raise a patio?
A common issue we see are patios sinking along the foundation causing water to drain towards the home – not good. Raising three 8’ x 8’ sections of patio along the home up 2” would cost around $850- $1,000. Along with concrete raising, there are other improvements you can do to fix-up your patio. Here is a good example of a complete patio make-over on this St Charles raising and repair project. Here is another patio raised and repaired in Naperville.
How many visits does it take to mudjack concrete?
Where as raising and lifting concrete, whether its mudjacking or polylifting will usually just take two visits – the estimate and the work. Material: Concrete contractors are charged a minimum load fee when they are not ordering more than a certain amount of concrete.
What to do about cracks in concrete?
To prevent your concrete from settling again, the cracks and gaps around the raised sections need to be sealed with a high quality sealant. Crack and Joint repair is typically not included as part of the standard raising process. Never assume its part of the job. If its not listed, its most likely not included. Learn more about crack and joint repair.
