Do I need a foam sleeve for my Shop-Vac®?
Use the Shop-Vac® Foam Sleeve for picking up wet messes when used alone. The Foam Sleeve is also required when using reusable dry filters. The approximate size of the foam sleeve is 8 inch diameter and 6.5 inch high. The foam sleeve is required unless you are using a cartridge filter.
What happens if you don’t put foam in a shop vac?
Foam sleeve, when put into a shop vac, allows water to pass through but stops dirt, debris, large particles, and other objects that can harm the shop vac motor. Without the foam sleeve, this debris and particles will get to the motor and damage it. Your motor could lose suction or stop working altogether.
What is the purpose of the foam sleeve filter?
The regular filter is for dry stuff This. You generally use the foam sleeve (with no filter, just the sleeve) when you're sucking up water. It prevents you from accidentally sucking up a sizable piece of debris with the water and then having that sucked into the motor, I think. Isn't that what you use when sucking up water?
Can you use a shop vac to vacuum a pool?
Not only can shop-vacs be used to clean up spills and wet debris, but they can also be used to vacuum large bodies of water like pools. They are used with filters that filter the dust from the air and protect debris and dirt from getting to the motor.
Do I need a foam filter for wet vac?
Which filter should I use for wet pickup? The best filter to use for wet pick up is a foam sleeve. The foam sleeve will stop debris, which may be in the water, from being sucked into the motor. When picking up water containing debris; such as, glass, stone, etc.
Where does the foam filter go on a shop vac?
0:182:09Shop-Vac Foam Filter Change, Part # 90585, 9058500 & 90585-00YouTubeStart of suggested clipEnd of suggested clipYou twist the retaining lid to open up and release the filter the cartridge filter. Just pull thatMoreYou twist the retaining lid to open up and release the filter the cartridge filter. Just pull that off okay there it goes pulled off that cartridge filter.
What is sponge filter for on shop vac?
This reusable foam sleeve can cleanup wet messes and waterborne debris and should not be used for a standard dry dust filter. A shop vacuum filter increases the optimal vacuum performance and prolongs the life of the vac by protecting the motor from harmful particles that could effect the motor.
Can you wash the foam filter in a shop vac?
Foam sleeve: These filters are found in wet/dry shop vacs to filter out damp particles. Shake it in an up and downward motion to dislodge debris if that doesn't work rinse from the inside, going out it under running water for a few minutes. Leave the filter to dry before reattaching it to the vacuum.
Can you use a shop vac without the filter?
1:261:59How to use a Shop Vac without a filter - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo what do you do when you're inside the house just stick this exhaust end up the hose.MoreSo what do you do when you're inside the house just stick this exhaust end up the hose.
How does a shop vac filter work?
3:205:19Never Use A SHOP VAC Without One Of These!! (Shop Vac Filter Bags ...YouTubeStart of suggested clipEnd of suggested clipThis stands for high efficiency particulate air filters in order for a filter to be rated hepa itMoreThis stands for high efficiency particulate air filters in order for a filter to be rated hepa it needs to filter out 99.90 of particles with the size of 0.3 microns. The most penetrating.
How do you use a shop vac to dry pickup?
2:274:02How To Use A Wet/Dry Vac - Ace Hardware - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen it's as simple as turning the unit on and using it to clean up your mess now i have someMoreThen it's as simple as turning the unit on and using it to clean up your mess now i have some sawdust right here. And you're going to see how quickly you can clean up that.
How often should you change a shop vac filter?
In a residential setting, the HEPA filter may last two or three years before it needs to be changed. In a commercial setting and used on a daily basis, it should be checked every six months. If heavily soiled it should be replaced; otherwise, it should be changed once per year.
Is a shop vac the same as a wet vac?
A shop vac, specifically a wet dry vacuum, can quickly suck the liquid up into a canister for easy disposal. And, with the variety of attachments that most shop vacs come with, they're suitable for flat surfaces, carpet, or even hard-to-reach crevices or vehicle floors.
How do you keep a shop vac filter from clogging?
0:276:52Dust Deputy Dust Separator - How To Keep Your Shop Vac Filter CleanYouTubeStart of suggested clipEnd of suggested clipSo I went with one of these dust deputies from Oneida Systems I bought this thinking that it wouldMoreSo I went with one of these dust deputies from Oneida Systems I bought this thinking that it would help me with my dust collection problem.
How do you clean a foam vacuum filter?
How To Clean A Foam Vacuum FilterSubmerge your foam filter in a sink or basin full of warm water and allow it to sit for a couple of minutes.Squeeze the foam filter to release all of the dirt.Run under water until the water is clear.Gently squeeze excess water.Lay the foam filter on a towel and allow it to dry.
How do I extend the life of my shop vac filter?
1:372:37Shop Vac Filters - How To Improve Performance - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe bags have a large surface. Area. So by using a bag and a cartridge your air velocity through theMoreThe bags have a large surface. Area. So by using a bag and a cartridge your air velocity through the shop vac will remain high it won't drop off like it does when that cartridge is is plugged up.
How do you put on a filter bag on a shop vac?
2:125:05How To Install Shop Vac Filter Bags - YouTubeYouTubeStart of suggested clipEnd of suggested clipJust kind of drop or down unit. Kind of work it in place. And then use that cardboard. There you canMoreJust kind of drop or down unit. Kind of work it in place. And then use that cardboard. There you can i push it side to side until she pops over. And it snug against the front of shop back.
How do you install a wet filter?
Step 1: Always check that the power cord is disconnected from the outlet. Step 2: Remove the power head and place in upside down position. Step 3: Carefully slide foam wet filter down over the filter cage making sure the whole cage is covered. Step 4: Place the power head back on the container and get to wet vacing!
How do you use a shop vac to dry pickup?
2:274:02How To Use A Wet/Dry Vac - Ace Hardware - YouTubeYouTubeStart of suggested clipEnd of suggested clipThen it's as simple as turning the unit on and using it to clean up your mess now i have someMoreThen it's as simple as turning the unit on and using it to clean up your mess now i have some sawdust right here. And you're going to see how quickly you can clean up that.
Why use foam sleeve on motor?
You generally use the foam sleeve (with no filter, just the sleeve) when you're sucking up water. It prevents you from accidentally sucking up a sizable piece of debris with the water and then having that sucked into the motor, I think. M.
How to dry vacuum a 5 gal shop vac?
On my 5 gal. shop vac, directions say if dry vacuuming, put foam filter on and cover with cloth cover. If wet vacuuming, take cloth cover off and use foam filter only. If dry vacuuming something like dry wall dust, and you don't use the foam filter, then I think you get a lot of dust blowing through and coming out the exhaust part.
What happens when you vacuum a foam filter?
When it is sucked up against the outlet, it both signals that the reservoir is full and protects the electric motor from ingesting water.
Can you dry vacuum with a foam filter?
No. Dry vacuuming is cartridge filter only. Wet vacuuming is foam filter only. I don't know if this is your exact vacuum, but many of the manuals are available on the site for the item. It's all explained in the manual here: http://www.craftsman.com/craftsman-xsp-1...mp;blockType=G2 Side note, Some better-equipped vacs come with synthetic media filters that won't be destroyed by getting them wet. They still aren't great if you're picking up lots of water, but if you need to pick up wet debris, they work well.
Special offers and product promotions
Amazon Business : Discover discounts and FREE shipping on work supplies. Register a free business account
Have a question?
There was a problem completing your request. Please try your search again later.
Product description
Small foam sleeve is designed for use with Shop-Vac HangUp, HangUp Pro and Bulldog Auto/Garage Vacs. Use the Foam Sleeve for picking up wet spills and messes. The Foam Sleeve is also required unless you are using a cartridge filter.
