What is a snow blower?
Snow blower. A heavy-duty walk-behind two-stage snow blower. A snow blower or snow thrower is a machine for removing snow from an area where it is not wanted, such as a driveway, sidewalk, roadway, railroad track, ice rink, or runway.
What are the parts of a snowblower?
Augers - Rotating paddles or serrated metal blades. Single stage snow blowers use rubber paddles to collect and throw snow in one motion, while two stage models have metal serrated augers that cut through deeper snow to feed the impeller.
What is an auger on a snow blower?
Auger Housing - The structure at the front of the snow blower where the snow is collected and processed by the augers. Belts - Two stage snow blowers usually require at least two belts, one to help turn the auger and impeller, and the other for the drive system. A broken belt can stop the snow blower dead in its tracks.
How do I choose the best snowblower?
If you are clearing large areas or get a lot of snow annually then you may want a dual-stage blower which will have more power and a wider clearing ability. A dual-stage snowblower has an impeller behind the auger, which propels snow up through the chute. This allows the auger to work more effectively through heavy or wet snow.
What is an auger on a snow blower?
What is the name of the spinning fan-like mechanism behind the augers that discharges the snow out of the?
How many belts do you need for a snow blower?
How long is a snow blower warranty?
What is a quick stick chute?
Where is the scraper blade on an auger?
When to use headlights on snow blower?
See 2 more
What are the parts of a snowblower called?
Snow Blower PartsAuger.Auger Gearbox.Bearing / Bushing.Belt.Cable.Discharge Chute.Engine Part.Friction Wheel / Friction Disc.More items...
What is a snow blower chute?
By Dale V. Electric snow blowers come with a variety of chute types. The chute control directs which way you blow the snow. To turn the chute without stopping, consider a model with a crank or lever chute. If you don't plan to turn the chute much, then a manual chute may be fine.
What are the blades on a snowblower called?
The blades or paddles that rotate inside the snow blower housing are called the augers. Single stage snow blower augers are rubber paddles. These paddles scrape the ground, so unlike two stage snow blowers, they wear.
What does a snow blower look like?
3:117:50Snow Blower Buying Guide (Interactive Video) - YouTubeYouTubeStart of suggested clipEnd of suggested clipThey have an impeller that speeds things along it pulls the snow from the auger. And pushes itMoreThey have an impeller that speeds things along it pulls the snow from the auger. And pushes it through the chute. Plus. They have engine driven wheels which means you aren't doing all the pushing.
How do you fix a snowblower chute?
0:000:52Snowblower Chute Won't Turn - Easy Fix! #shorts - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow all you have to do to repair this and it won't cost anything is loosen the two half inch nutsMoreNow all you have to do to repair this and it won't cost anything is loosen the two half inch nuts under here so just go in there with a ratchet a small ratchet preferably and a half inch socket.
What do you use for a snowblower chute?
Snowblower chute lubricant is the best choice because it was created for this purpose, provides a protective shield for dirt, snow, and grass, and doesn't need to be reapplied before each use. Just spray the chute and auger before the first use of the season and you're good to go.
Can you replace the blades on a snowblower?
Over time, your snowblower paddles will wear down, losing constant contact with the surface. This doesn't mean it's time to get a new snowblower. All you need to do is get a new set of paddles. Replacing the paddles is extremely easy... as long as you buy the right replacement parts.
What are paddles on a snowblower?
Your snow blower's paddles and scraper bar play an important role in the operation of your machine. They protect the snow blower's housing while ensuring that snow is properly being gathered and discharged. There is no fail-safe method to care for your snow blower's paddles and scraper bar.
When should I replace my snowblower scraper bar?
If your scraper blade has worn too far and can't be adjusted any farther, it will need replacement.
What's the difference between a snow thrower and a snow blower?
A "snow thrower" refers to a single stage snow removal machine that picks up the snow in one motion and throws it out the chute with the continuation of that movement. The term "single stage" describes the fact that the snow is thrown in one single movement. A "snow blower" refers to a two stage snow removal machine.
How many inches of snow before you use a snowblower?
Snowblowers work on any depth of snow. However, you will find the best results on snow deeper than two inches. There are some additional factors you should consider when removing snow including the type of snow and the surface you will be working with.
Can a snowblower cut through ice?
Yes, a snowblower can also remove ice, but how well it goes depends on the thickness of the ice and the size and weight of the snowblower. The snowblower needs to break the ice into chunks that can be pickup by the augurs. A bigger, heavier and more powerfull snowblower will be able to break thicker ice.
What is auger assisted on a snowblower?
On a two-stage snow blower, an auger first collects the snow and an impeller fan then discharges the snow through a chute. This two-stage process moves snow faster and farther than single-stage blowers, throwing snow up to 60 feet.
What is a remote deflector on a snow blower?
First, you can throw the snow left or right. Second, some models feature remote deflectors that control how high and low the snow goes. But there's more to a snow blower's chute than that. Read on to learn more about the different types of chutes available and to find out which style is right for you.
Do Single stage snow blowers have shear pins?
Single stage walk-behind blowers with their forgiving rubber paddles used in lighter snow removal work will not have shear pins or bolts.
What is the best snow blower for me?
The Best Snow BlowersOur pick. Toro SnowMaster 824 QXE. The best snow blower. ... Runner-up. Toro SnowMaster 724 QXE. Almost the best snow blower. ... Also great. Cub Cadet 2X 26 HP. Better for gravel driveways. ... Also great. Ego Power+ SNT2405 24-inch Self-Propelled 2-Stage Snow Blower. A cordless option.
Snow Blower Buying Guide | Lowe’s
Snow blowers, or snow throwers, provide fast, efficient snow removal and are a time- and labor-saving alternative to shoveling. Learn about single-stage, two-stage and three-stage snow blowers, their features and how to find the best snow blower to remove snow from your sidewalk or driveway.
What is the second part of a snowblower?
This is the second part of a dual-stage snowblower – and resides just behind the auger. It grabs the snow and propels it up the chute. Also known as the impeller, this component should be made from durable materials so it can deal with the occasional rock or chunk of ice that your snowblower may pick up.
What is a single stage snow blower?
The most basic of snowblowers is referred to as a single-stage. It has an auger that turns, which collects the snow and fires it out the discharge chute. Additionally, when the auger spins against the surface being cleared it helps to propel the machine forwards. This means that the operator needs to guide the blower, but for the most part it will propel itself. It also means that single-stage blowers are only good for hard, smooth surfaces.
What is the auger on a snowblower?
This is a spiral metal, rotating blade at the front of the snowblower that cuts through snow and sends it to the back of the machine. In a single-stage machine it is also responsible for sending snow up and out the chute, while in a dual-stage snowblower the impeller or turbine will propel the snow out. It is important that the auger be made of quality, durable materials as it will take a lot of punishment over long winters.
Can you use a dual stage snowblower on grass?
This also means that the auger does not contact the surface and the height is adjustable, so you can use these types of blowers on any type of surface: grass, gravel, concrete, dirt, etc.
What is a Boss DXT snow plow?
The BOSS DXT snow plow features a dual trip design.
What are the shocks on the back of a straight blade plow?
Shocks on the back of straight blade plows that slows the return speed of the moldboard trip.
How does a hydraulic plow attachment work?
This hydraulic attachment system is activated by putting the plow controller into “float” mode. Then the operator can completely attached and detached the plow by raising or lowering the toggle switch at the side of the plow. The attachment system has a set of pins that automatically engage locking the plow to the vehicle.
What is the function of a plow controller?
Function of the plow controller which opens the lowering valve allowing the lift cylinder to extend or retract, keeping the blade in contact with the ground to follow the contour of the surface being plowed.
What is a Boss cylinder?
The BOSS system uses a hydraulic cylinder which minimizes movement of the blade while in transport.
How to add width to a plow?
Additional width can be added to the plow unit by adding removal blade wing extensions. These can be easily taken on or off the blade depending on the area needing to be plowed. The wings will add additional plowing width thus cutting down on the time to clear a lot.
What is the black vertical weldment?
The black vertical weldment that houses the hydraulic manifold and power unit. Attached to it are the light bar and push frame.
What is a snowblower?
The snowblower is a basic machine and each model has the same types of components. Understanding snowblower components can help you determine the quality of any machine you are considering. It can also help you understand how you can get the most out of your machine.
What is the job of a snowblower carburetor?
The job of a carburetor is to mix gasoline with oxygen in order to make an optimum material for combustion. If the mix is too lean (not enough oxygen) or too rich (too much oxygen) it can lead to poor performance or even cause damage to the unit. A good carburetor should be made from quality components and should be easy to access so you can make adjustments when necessary. Usually you can ascertain the quality of a snowblower carburetor by reading reviews and talking to owners of previous models from the same manufacturer as they will usually use the same components across most models.
Why do you need a chute on a snow machine?
The chute ensures that the snow coming out of the machine is directed where you want it to go, and should be easy to maneuver. Many new machines now come with a joystick so you can turn the chute without having to stop clearing snow. The chute should also be easy to clear, and not clog easily or else it will slow you down.
What is a single stage snow blower?
On a single-stage snow blower, the auger (the paddle mechanism visible from the front) pulls snow into the machine and directs it out of a discharge chute. The auger contacts the ground, making single-stage snow blowers unsuitable for use on unpaved surfaces.
What is a jet engine snow blower?
Jet-engine snow blowers. Jet engines and other gas turbines are used for large scale propelling and melting of snow over rails and roads. These blowers first were used in Russia and Canada in the 1960s, and were later introduced into the U.S. by the Boston Transportation Authority.
What is a snow thrower?
Snow thrower on Simplon Pass. A snow blower or snow thrower is a machine for removing snow from an area where it is problematic, such as a driveway, sidewalk, roadway, railroad track, ice rink, or runway. The commonly used term "snow blower" is a misnomer, as the snow is moved using an auger or impeller instead of being blown (by air).
How much snow can a snow blower remove?
Snow blowers range from the very small, capable of removing only a few inches (a few more cm) of light snow in an 18 to 20 in (457 to 508 mm) path, to the very large, mounted onto heavy-duty winter service vehicles and capable of moving 20-foot (6.10 m) wide, or wider, swaths of heavy snow up to 6 feet (1.83 m) deep.
How to clear a snow blower jam?
The correct procedure is to turn off the engine, disengage the clutch and then clear the jam with a broom handle or other long object. In an effort to improve safety, many manufacturers now include a plastic tool to be used to clear jams, often mounted directly to the snow blower.
What type of power does a snow plow use?
It can use either electric power (line power or battery), or a gasoline or diesel engine to throw snow to another location or into a truck to be hauled away. This is in contrast with the action of snow plows, which push snow to the front or side. Typically, the snow is discharged to one side.
Does a jet engine melt snow?
The jet engine both melts and blows the snow, clearing the tracks faster than other methods. While offering considerably greater power in a relatively lightweight machine, this method is much more expensive than traditional snow removing methods.
What is an auger on a snow blower?
Augers - Rotating paddles or serrated metal blades. Single stage snow blowers use rubber paddles to collect and throw snow in one motion, while two stage models have metal serrated augers that cut through deeper snow to feed the impeller.#N#Aug er Housing - The structure at the front of the snow blower where the snow is collected and processed by the augers.
What is the name of the spinning fan-like mechanism behind the augers that discharges the snow out of the?
Impeller - The spinning fan-like mechanism behind the augers that discharges the snow out of the chute.
How many belts do you need for a snow blower?
Belts - Two stage snow blowers usually require at least two belts, one to help turn the auger and impeller, and the other for the drive system. A broken belt can stop the snow blower dead in its tracks.
How long is a snow blower warranty?
It also balances the snow blower if a snow cab is installed. 1 - 3 Year Warranty - Snow blower Consumer Warranties usually range from 1 to 3 years. If something goes wrong with your machine during the warranty period, contact your local dealer and manufacturer for further details.
What is a quick stick chute?
Quick-Stick Chute Control - Refers to the remote chute rotation controls on Toro's two stage Power Max snow blowers.
Where is the scraper blade on an auger?
Scraper Blade - Located on the bottom of the auger housing, a scraper blade scrapes the surface of excess snow left behind by the augers. Shear Pins/Bolts - Installed on the auger shaft, a shear pin's purpose is to break when the auger gear case is being over-torqued.
When to use headlights on snow blower?
Lights - A headlight on a snow blower gives you the option to clear snow at night or in the early morning.
