Who makes the best gas fireplace inserts?
- BEST OVERALL: Napoleon Grandville VF Series GVF36-2N 37″ Vent Free
- BEST BANG FOR THE BUCK: ProCom Vent-Free Dual Fuel Fireplace Insert
- BEST FLEXIBILITY: Empire Loft Series DVL25 Fireplace Insert
- BEST DUAL FUEL: Superior DRI2000 Gas Fireplace Insert
- BEST DIRECT VENT: Empire Tahoe Deluxe 36″ Direct-Vent NG Millivolt
What fireplace inserts are the best?
- BEST OVERALL: Osburn 1700 Wood Fireplace Insert
- RUNNER-UP: Buck Stoves Model ZC21 Wood Stove Insert
- BEST BANG FOR THE BUCK: Ashley Hearth AW1820E 1,800 Sq. ...
- UPGRADE PICK: Osburn Matrix 2700 Wood Fireplace Insert
- BEST NON-CATALYTIC: Ventis HEI170 Single Door Wood Fireplace Insert
- BEST CONTEMPORARY: Supreme Fusion 18 Wood Burning Fireplace Insert
How much does a gas fireplace insert cost to install?
What is the average cost of a gas fireplace insert? An insert cost varies from $580 to $900 for a direct-vent or ventless design, not including installation. Can you install a gas fireplace on an interior wall? You can install a ventless unit on an interior wall as long as the room size can provide the amount of air needed.
Why convert a traditional fireplace to a gas fireplace insert?
Warm air can be pulled up the chimney, resulting in heat lost within the room your fireplace is located in, as well as additional rooms. As a result, only 15% of the wood in your fireplace’s energy is actually converted into heat. In comparison, a gas insert can get up to 80% heat efficiency and properly heat your home.
What sizes do gas fireplace inserts come in?
Gas Fireplace Insert SizeSmall: 10-18,000 BTU – up to 800 sq. ft.Medium: 25-30,000 BTU – up to 1400 sq. ft.Large: 35-40,000 BTU – up to 1800 sq. ft.
How big can a gas fireplace be?
Typically, gas fireplaces are classified into four sizes – small, medium, large, and extra-large. As a basic benchmark, a small gas fireplace will heat less than 500 sq. ft., a medium gas fireplace will heat between 500 – 1,000 sq. ft, a large gas fireplace will heat between 1,000 – 2,200 sq.
How many square feet can a fireplace insert heat?
Mid-size fireboxes from 1.8 to 2.8 cubic feet and from 40,000 – 70,000 BTU's will heat up to 2000 square feet. Smaller units, less than 1.8 cubic feet will heat up to 1000 square feet of well insulated space.
Which gas fireplace insert puts out the most heat?
Ventless gas fireplace inserts have the best heating efficiency since they have no ductwork. Most units operate with 99 percent efficiency and produce a minimal amount of carbon monoxide.
How big should my fireplace insert be?
Start with Dimensions Length: The distance from one side of the fireplace to the other. Measure the length at both the opening and back of the firebox. Height: The distance from the floor of the firebox to the top. Measure in the front and back to ensure an optimal fit.
Can a fireplace be too big for a room?
A fireplace can be too big for a room. For instance, a fireplace wider than 40 inches (over 3 feet) may look out of place in smaller spaces and appear like it's encroaching too much on interior space. Such a fireplace may also increase energy bills by overheating the room.
What is the highest BTU gas fireplace?
The Regency Horizon HZ965E Gas Fireplace - 48,000 BTU's The Horizon HZ965E is the hottest gas fireplace product available at regency, offering up to 48,000 BTU's this large, square, contemporary fireplace has one of the largest viewable areas of any Regency product and produces enough heat to warm large living spaces.
Can a gas fireplace heat a whole house?
Gas Logs are normally installed inside an open masonry fireplace. They may radiate heat in front of the fireplace, but they will not be able to heat an entire home.
Can a fireplace heat an entire house?
Absolutely! And many houses already have a fireplace. It's just a matter of using it to bring some much-desired warmth into your home. That said, unlike central air, no fireplace is going to be able to properly heat your entire home at once.
What brand is the best gas fireplace?
BEST OVERALL: Napoleon Grandville VF Series GVF36-2N 37″ Vent Free.BEST FLEXIBILITY: Empire Loft Series DVL25 Fireplace Insert.BEST DUAL FUEL: Superior DRI2000 Gas Fireplace Insert.BEST DIRECT VENT: Empire Tahoe Deluxe 36″ Direct-Vent NG Millivolt.MOST VERSATILE: Ashley Hearth Products 34,000 BTU Vent Free Firebox.More items...•
What is the most realistic looking gas fireplace?
H. Peterson Real Fyre Gas Logs are the most realistic gas logs because they are meticulously hand-crafted to resemble natural wood and carefully designed and arranged to produce a flame that looks just like a real wood fire.
Is it cheaper to run a gas fireplace or the furnace?
A modern furnace is more efficient in turning gas into heat than a gas fireplace. This means that although a furnace costs more to run per hour than a gas fireplace, it turns more of that energy into heat and can warm a whole house rather than a single room.
Large Gas Fireplace Inserts
This large gas insert is well suited to sealing large old fireplace openings with a high-efficiency heater that excels at producing warm, comforting radiant and convective heat. The LRI6E gas insert has a blower built in to circulate warm air to the far reaches of the room, ensuring you stay comfortable.
Controls
The following specifications and literature apply to this product. You can also design your own fireplace with the Fireplace Design Center.
How much heat does a gas fireplace insert produce?
Heat output varies by model and fuel type, but most gas fireplace inserts produce between 20,000 and 40,000 BTU (some have much higher or lower outputs).
What is a gas fireplace?
Gas fireplaces are a convenient and appealing way to add the warmth of a fireplace to your home without the hassle of traditional woodburning fireplaces. Available in either vented or ventless configurations, you’ll need to determine which choice is right for your space. Vented gas fireplace inserts will require a flue or ductwork ...
How many BTU is the Empire Tahoe fireplace?
The Empire Tahoe Deluxe NG Millivolt Fireplace provides up to 20,000 BTU of heat using a natural gas supply. It features a brick liner and six ceramic logs for an authentic fireplace look. The glass front provides a sealed chamber for combustion, but take note that the glass can become very hot to the touch. You’ll need to buy a barrier screen or door set for protection against touching the hot glass. This fireplace insert measures 37 inches wide but only 16 inches deep, allowing it to fit into shallow fireplace openings.
What is the difference between a gas fireplace insert and a direct vent fireplace insert?
Gas fireplace inserts have varying percentages of heating efficiency , largely dependent on the unit’s venting type. Natural-vented fireplace inserts have the lowest heating efficiency since heat is lost through the open damper or flue. Direct vent fireplace inserts have better heating efficiency because they draw in outside air and use smaller ductwork for exhaust. Ventless gas fireplace inserts have the best heating efficiency since they have no ductwork. Most units operate with 99 percent efficiency and produce a minimal amount of carbon monoxide. However, it is important to monitor oxygen levels in a room with a ventless gas fireplace. In most cases, these types of inserts come equipped with an oxygen depletion sensor.
How does a direct vent fireplace work?
While most gas fireplace inserts need to exhaust fumes through the chimney, a direct vent fireplace uses a sealed chamber to draw in fresh air and expel exhaust through a specialized pipe that exits the house through a wall or roof opening. The Empire Tahoe Deluxe is a 36-inch direct vent fireplace that operates using natural gas.
How long does it take for a Kingsman fireplace to light?
With both natural gas and propane fuel options, you'll also get to decide whether to upgrade to IPI (immediate ignition) or standard millivolt ignition, which takes up to 30 seconds to light. As a direct vent model, this insert sends exhaust up your existing chimney with a chimney insert or horizontally through an exterior wall with special ductwork.
What is the best ventless fireplace?
Best Ventless: Ashley Hearth Vent-Free Natural Gas Fireplace Insert. A ventless gas fireplace doesn’t require external venting, which offers an important upside: no heat escapes out the chimney or flue. As a result, ventless gas fireplace inserts are generally considered the best type of inserts for heating your room.
Which type of fireplace insert is the safest?
Note: The “Direct-vent” option shown above, is considered the safest, and most energy-efficient type of gas fireplace insert.
How Do I measure For Gas Fireplace Insert?
If you are using your existing chimney for a new gas fireplace insert, then measure the following: Chimney Opening – height, width; depth (at the top and bottom); rear width, and the depth of the hearth (area in front of the fireplace).
How Big a Fireplace Do I Need?
The illustration below from “This Old House” allows you to determine the size of the fireplace you require (In BTU’s). The formula total will determine the approximate BTU (British Thermal Units) Output required to heat a space.
Do gas fireplace inserts require electricity?
Gas fireplace inserts do not require electrical power to operate, however, if you choose to install a gas fireplace that includes a blower/fan, or wall thermostat, those options will require an electrical hook-up.
Why are Ventless (Vent-Free) Gas Fireplaces So Popular?
Most newer homes are now being built with an air-tight construction method. This means fewer walls or roof penetrations and as a result less heat loss. As a result, very few homes are built today with masonry chimneys, due to their cost, and inherent heat loss in the home.
How many BTUs does a Tahoe fireplace insert have?
The Empire Tahoe Deluxe natural gas fireplace insert creates a comfortable 20,000 BTUs and doing so at 83% efficiency. The Fireplace includes a heat-resistant, large tempered glass viewing window, black slat louvers, a natural-looking 5 pc log set, contour burner, and is used for direct vent installation.
What type of gas does a ProCom fireplace insert use?
Running at a close second is the ProCom gas fireplace insert, which offers the distinctive “dual-gas” option, of using either Natural Gas or Liquid Propane fuel sources.
Can a wood fireplace be replicated?
A wood fireplace can be tough to replicate. However, some gas fireplace manufacturers go to great lengths to create an authentic wood fireplace appearance while still maintaining the benefits of a gas fireplace.
Is vent free fireplace good?
If you’re looking to add a fireplace to a location where traditional venting isn’t an option or you’re just looking to maximize heat output, then a vent-free fireplace makes a great choice for your installation.
Do gas fireplaces increase the price of a home?
Gas fireplaces look great, increase the coziness of a room and can even increase the sale price of your home! With all of these great benefits, it’s no surprise that more homeowners are looking to install one of these premium appliances. However, with so many options available, it can be difficult to sort through the market. That’s why we’ve put together this helpful guide.
Why use a fireplace insert?
A fireplace insert helps to reduce emissions, increase efficiency, save money on heating, and transform the room. DID YOU KNOW: all Regency fireplace inserts work safely and efficiently even without electricity so if a winter storm knocks out your power, you will still be warm!
What is the EPA's standard for wood burning inserts?
The EPA has issued new regulations for all wood burning units that requires particulate emissions to be below 2.0 grams/hour of particulate emissions . Regency’s line of wood burning inserts are 2020 compliant and includes cast iron, steel, hybrid catalytic and non-catalytic units; a fireplace insert for every type of wood burner!
Can a Regency fireplace insert fit in a masonry fireplace?
Regency fireplace inserts are designed to fit inside up to 95% of existing masonry fireplaces. Chances are that Regency has the perfect wood or gas fireplace insert to fit your existing masonry fireplace. Our extensive line of faceplates and surrounds are designed to cover any remaining gaps or openings.
Can a Regency fireplace insert be used on natural gas?
Regency gas fireplace inserts can operate on natural gas or propane. A gas insert offers all the comfort, warmth, and ambiance of a fire without the need to chop, store, and haul wood. Experience Regency’s industry leading flame picture and ambiance at the push of a button with a new gas fireplace insert.
Does a fireplace insert seal a hole?
As a result, your fireplace insert will seal a major hole in your home – keeping you warmer in the winter and cooler in the summer. More of the heat generated by your fireplace is directed into the room instead of out the chimney – resulting in less wasted fuel.
