The Importance of Starter Shingles Starter shingles
Shingles
A viral infection caused by varicella-zoster characterized by painful rash with blisters.
Do you need starter shingles?
You’ll need shingles for starter courses along the eaves and sometimes at rakes, and you’ll need shingles to cap hips and ridges. Cutting shingles also generates waste. In some places, including at the rakes, against walls and chimneys, and at valleys, you’ll need to cut shingles.
Which shingle is best?
- Royal Sovereign: Traditional 3-tab shingle.
- Timberline: Architectural shingle with various sub models, including: AH, HDZ, AS II, CS, UHD and NS. ...
- Camelot: Entry level designer shingle.
- Glenwood: Shake style designer shingle.
- Grand Canyon: Shake style designer shingle.
- Grand Sequoia: Hand cut wood style designer shingle.
How to cut and install starter shingles?
Part 1 Part 1 of 3: Preparing the Roof Download Article
- Get the right number of shingles for the job. It generally takes three bundles of shingles to cover 100 square feet (9.29 square meters).
- Measure the length of a shingle as it lies across the roof. This will help determine how the shingles will lay on the roof width.
- Remove old shingles and flashing. ...
- Clean the roof. ...
- Install underlayment and new flashing. ...
Which shingle manufacturer is the best?
Ultimately, the test revealed that the top 10 shingle brands were:
- Atlas – Pinnacle Pristine
- GAF-Elk – Royal Sovereign
- CertainTeed – XT 25
- Atlas – StormMaster Slate
- Tamko – Heritage
- Owens Corning – Oakridge
- Owens Corning – Duration
- Owens Corning – Berkshire Collection
- IKO – Crowne Slate
- IKO – Cambridge
What is the Purpose of a Starter Shingle?
Why Do Some Shingles Need Unique Shingle Starters?
Do You Need a Starter Course with Architectural Shingles?
Why are starter strips important?
Why use starter shingles along rake edge?
How much should starter shingles overhang?
What is IKO starter?
See 2 more
What happens if you don't use starter shingles?
Without this starter course of shingles, your roof will lack the foundation needed to prevent water leaks and uplifts from strong winds. The most vulnerable parts of your roof that lack starter strips would be your eaves and rake edges.
Why do I need a starter strip for shingles?
The starter strip is crucial because it adheres to the shingles on the edges of your roof and protects them from the elements. Without starter strip shingles, a gust of wind would have no trouble sneaking under the shingles on the edges of your roof and blowing them up, and perhaps even off, your roof.
Where do you need starter shingles?
Starter shingle should be installed around ALL edges of your roof. To meet code, technically it only needs to be installed on the bottom eaves, but there are some big benefits to installing it up the rake edges as well (also known as gable edges).
What's a starter shingle?
Starter shingles (also known as starter strips) are a key component to your new roofing system. A starter strip is an asphalt based shingle utilized to waterproof the eave and rake edges of your home during a re-roof.
Are starter shingles necessary?
Starter strips are an important and integral part of an asphalt shingle roof system. They aid the roof's water-shedding function by covering shingle joints (and cutouts in traditional three-tab shingles) at the eaves.
Can I use regular shingles as starter shingles?
The starter strip is the layer of shingles underneath the first course along the edge of the roof. Some roofers simply take regular shingles, flip them upside down and nail them down as a starter course.
Do you overlap starter shingles?
1:096:32HOW TO INSTALL THE STARTER SHINGLE - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd it's perforated and you divided in two right now we're installing the starter strip on the gableMoreAnd it's perforated and you divided in two right now we're installing the starter strip on the gable end. And five mils per shingle approximately two to three inches back from the rake. Board we want
How many starter shingles do I need?
Determine the number of shingles to order for starters by measuring the length of the eaves and rakes, then round up to the nearest foot and divide by three (the length of a shingle).
Can I use 3 tab shingles for starter?
0:000:30Common Mistake: Substituting Cut 3-Tab Shingles For Starter StripsYouTubeStart of suggested clipEnd of suggested clipA roofers installing cut three tap shingles says starter strip can increase the risk of shingle blowMoreA roofers installing cut three tap shingles says starter strip can increase the risk of shingle blow offs.
How do you roll with starter shingles?
Easy Application Simply apply a single course of Starter Shingle Roll along a clean, dry and smooth eave line, after removing the release sheet. Apply the Starter Shingle Roll directly onto the WeatherLock® underlayment or a layer of felt. Once it is pressed into place, you're ready to begin shingling.
How do you use a starter strip for shingles?
1:092:34ESSENTIALS OF THE STARTER SHINGLE - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo installing the starter strip this windstorm starter strip being installed on easy fries here it'sMoreSo installing the starter strip this windstorm starter strip being installed on easy fries here it's important to put your nipples in close. The fascia but what we do not want to do is we don't want
What size are starter shingles?
CertainTeed's Universal Starter Strip Shingles (7” x 36”) combines durability and flexibility for better resistance to blow-off.
Do you peel the plastic strip off shingles?
The GAF shingle application instructions for our entire product line specifically state that that film does not need to be removed. Note: The film strips on the back of each shingle are to prevent sticking together of the shingles while in the bundle. Their removal is NOT required during application.
What is a strip shingle?
Also known as 3-tab shingles (due to the cut of the shingle) or simply strips, strip shingles are the original and most basic asphalt shingles. They are made from a single layer of asphalt and have a very flat appearance that typically offers a slate look.
What does a starter shingle look like?
0:256:00How to Install Starter Shingles - YouTubeYouTubeStart of suggested clipEnd of suggested clipStrips. Some contractors will opt out of using actual starter shingles and they will use a three topMoreStrips. Some contractors will opt out of using actual starter shingles and they will use a three top shingle or even their architectural shingles that they're installing on your roof.
How much starter strip do I need?
2:013:53How to Install Starter Strip Roofing Shingles | Mastering the Roof by GAFYouTubeStart of suggested clipEnd of suggested clipYou must trim 5 inches off the first weather blocker starter strip or three inches off the first ProMoreYou must trim 5 inches off the first weather blocker starter strip or three inches off the first Pro start starter strip. This critical step ensures that the starter strip butt joints and overlapping
What is starter shingle?
Starter shingles (also known as starter strips) are a key component to your new roofing system. A starter strip is an asphalt based shingle utilized to waterproof the eave and rake edges of your home during a re-roof. Take a look at your roof and you’ll see how the field roofing shingles are overlapped to create seamless flow ...
What is a factory starter?
Factory starter is also a part of the GAF complete roofing system and required to qualify the roof for an upgraded warranty. Here are a few technical points for Pro-Start starter strips (from GAF website):
What is the purpose of tar strips on a roof?
Adhesive tar strips help prevent shingle blow-off from harsh winds (along eaves as well). A straight line to properly orient each new row of shingles. Thicken the shingle layers sticking over the rake edge to help prevent drooping. Without starter strips or starter shingles, water will likely penetrate your roof edge.
What size should the starter strip be on a Golden Pledge?
The edge of the starter strip should hang over the eave and rake edge 3/4″ in order to create a drip edge. This is required on all Golden Pledge system warranties.
Can you put underlayment on a roof without starter strips?
Without starter strips or starter shingles, water will likely penetrate your roof edge. A good underlayment, like GAF Tiger Paw synthetic hybrid underlayment goes a long way to reducing damage. But it is only a secondary layer of protection that functions robustly when the water that reaches it is a low enough quantity.
Do you need to include shingles in a new roof?
When having a new roof installed on your home you will need to verify that your roofing contractor has included all of the critical components, other than shingles, of the roofing system in your contract price. Some contractors will offer you a very appealing price but in the end they have removed some of the most critical components ...
Can shingles overlap?
But along the eave line, roofing shingles come to an edge and can’t be overlapped. To prevent water penetration, we install starter shingles or starter strips. Where the shingles on the eaves butt up against each other, these starter strips provide the overlap function.
What does a starter shingle do to a roof?
Specifically, a starter shingle on your gables improves your roof’s wind resistance.
Why do you need starter strips on a roof?
Mainly, starter strips provide the overlap function so that water can flow seamlessly on your roof without penetrating into your home. Without this starter course of shingles, your roof will lack the foundation needed to prevent water leaks and uplifts from strong winds.
Can you install rolled roofing over shingles?
Rolled roofing or roll on shingles is an alternative roofing material that’s extremely easy to install, affordable, and adaptable.
How many feet of shingles is a bundle of 10?
For example, if a bundle of 10 shingles is equivalent to 60 meters/linear feet of coverage, you can use the total length of your eaves and rake edge to see how much you’ll need for the installation. Finally, make sure that the joints of your starter shingle are not coincidental with the joints of your finished shingle.
Why are starter strips called starter strips?
Some manufacturers refer to starter shingles as starter strips because this also avoids confusion between a starter shingle and roof shingle. Starter strips also don’t have a specific color system, unlike roof shingles. Since your starter strip will be placed below your roof shingles, aesthetics don’t matter as much.
How many lineal feet are in a starter shingle?
Depending on the manufacturer, this is around 33.33 lineal feet.
What are starter strips made of?
Starter strips follow a rectangular design and appear generic; however, they’re made of the same material as asphalt shingles: fiberglass.
Why do you need a starter?
The starter is very necessary to keep water out.
How wide is a shingle?
Some people cut the individual shingles off, leaving a solid piece of shingle material about 7" wide and 3' long. If this is not done, you get a sort of hump about 1" up, especially if this is the second layer of shingles done this way.
Do shingles need starters?
You might politely mention to your neighbor that he look at the instructions printed on the wrapper of the shingles. There is no shingle system in the world that does not use some form of starter.
Do starters help with drip off rake?
I think starters along the rake also reduce the amount of drip off the rake and onto the siding.I some times see it on older houses in NW Ohio, nevr on new stuff
Do you put starter shingles under rakes?
Based on everything I’ve read (I know – a little knowledge is a dangerous thing), it’s standard practice to install a row of “starter” shingles under the the first row of shingles on all eaves. Some even recommend on all rakes. What is the purpose? I suppose the double thickness on the eaves will make the first row “lay right” and match the other shingles. In the Taunton “Roofing with Asphalt Shingles” book the auhor also indicates that the starter strip helps with water resistance.
What is the Purpose of a Starter Shingle?
Disclaimer: Please use caution when working on sloped roofs. If you have any concerns or are not trained to work at heights, hire a trained professional.
Why Do Some Shingles Need Unique Shingle Starters?
However, certain shingle designs, such as IKO’s Armourshake, have intermittent lower exposed tabs. When roofers install those shingles at the eave on the first course, the starter is visible, and, therefore, its color is relevant. In this case, an additional starter shingle course, in matching colors to the finished shingle, is required as a secondary starter layer.
Do You Need a Starter Course with Architectural Shingles?
The starter edge will help seal the edges and cover your shingle joints. As it won’t be visible on the finished roof, you don’t need to worry about the look of your starter strip and whether it matches your architectural shingles. You can instead use the same starter strip that you’d use for 3-tab shingles.
Why are starter strips important?
Starter strips are an important and integral part of an asphalt shingle roof system. They aid the roof’s water-shedding function by covering shingle joints (and cutouts in traditional three-tab shingles) at the eaves.
Why use starter shingles along rake edge?
A simpler and very useful purpose for using starter shingles along the rake edge is that it gives the installer a nice straight line to use as a guide when ending each course of the field shingles.
How much should starter shingles overhang?
Whether installed at the eave or the rake, the starter shingles should overhang the edge of the roof by ¼ inch to ¾ inch. Typically, the finish shingles are then installed to align with the edge of the starters.
What is IKO starter?
IKO’s starter shingle product, Leading Edge Plus, offers the latest evolution in roof starter strips. Professional contractors who make the smart decision to use them will find they save time, are easy to install and are consistently sized. Each Leading Edge Plus starter strip “shingle” is perforated right down the middle so that you get two starter strips out of each roof shingle.