Standard sizes for common round tablecloths:
- 30 inch round table: Seats 2-3 People: 64 inch cloth (17 inch drop)
- 48 inch round table: Seats 6 People: 72 inch cloth (12 inch drop)
- 60 inch round table: Seats 8 People: 90 inch cloth (15 inch drop)
- 60 inch round table: 120 inch cloth (30 inch full drop)
- 72 inch round table: Seats 10 People: 120 inch cloth (24 inch drop)
How to select the right sized tablecloths for your table?
To determine the tablecloth size of your cloth you need to know:
- The dimensions of your table in both length and width.
- How far down you want it to drop.
- The most desired drop: 8″-12″ to lap level 29″-30″ to the floor
How much bigger should a tablecloth be than the table?
You should be able to find a tablecloth near the dimensions you need ready-made, however you can always make one or have one custom made to fit your table if you desire. A tablecloth that extends halfway to the floor should be approximately 30 inches wider and longer than your dining table.
What size table cloth for a 48 x 60 table?
The most common round tables used in weddings and special events and the recommended table linen sizes are as follows: 48 inch or 4 ft round tables - 108 inch round table cloths 60 inch or 5 ft round tables - 120 inch round table cloths for a full drape, 108 inch round for some leg room, 90 inch round for a drop that goes halfway to the floor.
What size tablecloth for a 10 person table?
This size cloth is good for a small bistro table or side table. A 70" cloth will fit tables 54" in diameter round table. These tables will seat 6-8 people. A 90" cloth will fit tables 74" in diameter round table. These tables will seat 8-10 people. For every table, we recommend a drop (overhang of your tablecloth) of at least 8 inches.
How much bigger should a tablecloth be than the table?
For a casual table setting, take your table measurements and add 12 inches to each side to get your minimum tablecloth size, then add 20 inches to get your maximum tablecloth size. Choose a tablecloth that falls between these two measurements. For a formal table setting, take your table measurements and add 60 inches.
What is the correct drop for a tablecloth?
Determine the desired length of your tablecloth drop (how far over your table you want the cloth to hang). At Williams Sonoma, we consider the standard to be 10 inches. Anything less than six will make your table look out of proportion and your linens too small.
What size tablecloth do I need for a rectangular table?
Square and Rectangle TableclothsStandard Table Sizes:For Lap Length, you need:6' Rectangular Table (seats 6-8)60" x 120" cloth8' Rectangular Table (seats 8-10)60" x 120" cloth36" Square Table (seats 4)72" square cloth48" Square Table (seats 4-6)72" square cloth1 more row
What size tablecloth do I need for a 6 person rectangular table?
Standard tablecloth linen sizes for rectangular tables: 6 foot rectangular banquet table: 52 x 114 tablecloth (standard drop), and 90 x 132 tablecloth (full drop) 8 foot rectangular banquet table: 52 x 120 tablecloth (standard drop), and 90 x 156 tablecloth (full drop)
What size tablecloth do I need for a 72 rectangular table?
90 inch x 132 inchThe most common rectangular tables used in weddings and special events and the recommended table linen sizes are as follows: 6 ft or 72 inch rectangular tables - 90 inch x 132 inch rectangle tablecloths or 6 ft rectangular spandex table covers.
What size table cloth do I need for a 6 ft table?
About Tables Measurements: For example a standard 6 foot banquet table is 72 inches x 30 inches with a 30 inch drop to the floor. For this example you will need 72 inches of fabric for the table top plus your desired drop.
Can you use a rectangular tablecloth on an oblong table?
Following is a basic chart of standard tablecloth sizes and the table sizes they would fit: Rectangular tablecloths (also called oblongs) fit both rectangular and oval tables. Rounds tablecloths fit round tables. Square tablecloths fit both square or round tables.
What size tablecloth do I need for a 60 inch table?
120” square60” table – Tablecloths will need to be 120” square and to the floor, two 90”x132” banquet tablecloths long on two ends, 132” round with a custom fit, or 90” square and used with an under cloth.
What size tablecloth do I need for a 8 foot rectangular table?
90 inch x 156 inchSTANDARD SIZE：90 inch x 156 inch rectangular tablecloth fits standard 8ft. rectangle table, giving your table all-round protection.
What is a puddle drop tablecloth?
A puddle drop describes a length of tablecloth hanging over the side of the table that extends beyond the height of the table allowing the tablecloth to puddle on the floor.
What size tablecloth goes on a 60 round table?
Round Table Tablecloth Dimensions. A 60” round table would be best served by a 120” round floor-length tablecloth or a 90” round lap-length tablecloth. A 72” round table should likely feature a 132” round floor-length tablecloth or a 108” lap-length tablecloth.
How to measure table cloth size?
To determine the tablecloth size of your cloth you need to know: 1 The dimensions of your table in both length and width. 2 How far down you want it to drop. 3 The most desired drop:#N#8″-12″ to lap level#N#29″-30″ to the floor
How much drop to lap level?
The most desired drop: 8″-12″ to lap level. 29″-30″ to the floor. Once you have the length and width dimensions, add the drop measurement twice to each dimension of your table top since the tablecloth has to hang over on both ends. The end measurements will be the tablecloth size.
Do square tables have round corners?
Square Tables and Rectangles. A few things to remember, if a square or rectangular cloth, has a drop to the floor, you will need to choose the round the corners option when adding it to your shopping cart. Otherwise, the corners will drag on the floor.
Can you put a round tablecloth over a round table?
You can use the same formula as outlined above, but you can put a round or square tablecloth over it , or one of each. For a formal look, some customers buy a round tablecloth that fits to the floor, then they will put a square tablecloth over the round one.
How to measure for round tablecloth?
For a round table, measure the diameter of your table and add twice the desired drop. For example a 60-inch round table with a 15-inch drop would require a 90-inch round tablecloth.
How to measure table cloth size?
After you’ve decided on the tone of your occasion, apply this simple equation to determine the correct length of your table cloth. First measure the length and width of your table. Next add twice the desired drop to each side’s dimension. For example, if your table measures 42 inches wide and 72 inches long and you want a drop of 9 inches, add 18 inches to each side. The resulting dimensions — 60 x 90 inches — is the tablecloth size you should purchase.
How much drop should a tablecloth have?
Determine Tablecloth Drop. For casual events, tablecloths should have a 6- to 8-inch drop from the edge of the table to the bottom of the tablecloth. For more formal events, tablecloths have a 15-inch drop from the edge of the table to the bottom of the tablecloth.
How far should a table cloth be from the table?
A cloth with a drop of 8-to 9-inches from the side of your table is considered a comfortable drop for casual, easy dining. It won’t restrict your diners legs or block access to the chairs.
What is the building block of a table?
The building block of any table setting is the tablecloth. Which is why it’s important to pick the right one for your home. But just like other decor, choosing linens is about more than finding a set that reflects your style. It has to be sized to fit your table.
Can you use two runners on a table?
For extra wide tables, use multiple runners in place of a single tablecloth, by placing runners either across the width as “placemats for two” or use two runners along the length of the table under the place settings.
How to Buy the Right-Sized Tablecloth
Here’s how to calculate your ideal tablecloth size, no matter how small or large your table is.
Rectangular Tablecloth Size Calculator
Our tablecloths tend to fit most rectangular tables with widths between 42 inches and 55 inches.
Round Tablecloth Size Calculator
If you’re shopping for a round tablecloth instead, then follow these parameters.
How to measure a round table?
1. Measure your table from end to end on all sides, length and width, in both inches and centimeters. For a round table, you will just need the diameter of the table. Some vendors will display them in the different measurements, so be sure you have both!
What Can I Display On A Cake Stand?
Do you have a cake stand that has been gathering dust on the shelf, but you’re willing to put it to good use? Are you thinking about what can I display on a cake stand? There’s nothing that can stop you from living your passion if you’re a creative addict who loves to use fancy cake stands for displaying flowers, candles, beverages, household essentials, and much more than just using them for sweet delicacies. Cake stands hold a special place in our hearts no matter how we use them. These pretty accent pieces can do wonders to your décor only if you know the right places to fit them in. Don’t just limit a cake stand to your cupboard waiting for a party as we have some amazing ideas for you to uniquely display different accents. Opt for your favorite cake stands from our amazing collection and breathe life into your imagination to make a standout statement.
What Is A Linen Napkin?
Paper napkins are used to make your table seem attractive but fabric napkins look more sophisticated and are ideal for a formal dining experience. Napkins are made from a variety of fabrics, the most popular of which are cotton, linen, polyester, and silk. Before moving forward let’s first discuss what is a linen napkin? Linen is a lightweight, soft, resilient, absorbent, easy-to-wash, and quick-drying fabric manufactured from flax plant fibers. These characteristics of linen make it excellent for fabric table napkins, which provide a touch of elegance to the table setting without compromising on functionality. So, if you want to know more about cloth table napkins then keep reading as below we’ve answered a few questions that come to mind while purchasing napkins.
How big should a tablecloth be?
Tablecloth sizes chart. For all tables, we recommend a standard drop (overhang of your tablecloth) of at least 8″. That means the 8″ of the finished tablecloth will hang over each side of the table.
How to determine tablecloth size?
If you know your table size and the desired “drop”, establish your tablecloth size by multiplying the drop length by 2, then adding the table diameter. For example, you have a 60 inch table and want a 15 inch drop (halfway to the floor), multiply 15 by 2 (15×2=30), then add the table diameter (30+60=90) to get 90 inches, which means you need a 90 inch round tablecloth.
How many people can fit in a 120 inch round tablecloth?
This means a 120 inch round tablecloth will cover a 60 inch round table and drop 30 inches off the table, or all the way to the floor (on a standard height table). Standard sizes for common round tablecloths: 30 inch round table: Seats 2-3 People: 64 inch cloth (17 inch drop)
How to measure tablecloth drop?
To find the tablecloth drop (the length your tablecloth will hang down from the tabletop), you simply subtract the table length from the linen size and then divide by two. For instance, you have a 42 inch square table and have a 62 inch square tablecloth. Subtract 42 from 62: (62-42=20), then divide by 2 (20/2= 10 inches). This means a 62 inch square tablecloth will cover a 42 inch square table and drop 10 inches off the table, a typical distance from the floor.
How to measure tablecloth size?
Tablecloth Size Chart – Calculating the Size of a Tablecloth 1 For Round Tables: Multiply the drop length you want by two then add the diameter of the table. 2 For Square Tables: Multiply the drop length you want by two then add the length of the table. 3 For Rectangular Tables: Multiply the drop length by two then add the length and width of the table.
How to find the size of tablecloth for a drop?
For an easy way to find the exact size tablecloth needed for a floor-length drop for a rectangular table: Double the height of your table and add it to the length and width.
What About Table Runners?
For a balanced look, the width of your runner should be about a third of the width of your table. So, if your table is 50” wide, the runner should be about 17” wide. In terms of drop length, that’s up to you; we recommend going shorter for a casual look and longer for more formal settings.
What is a tablecloth?
Tablecloths or linens can be a great style accessory if you’re looking to add length, texture and color to your table setting – that is, if you have the sizing right. Mastering tablecloth sizing comes down to a few simple calculations, starting with the size and shape of your table. Whether you’re a restaurant or hosting a small party and want to get the look “just right,” following these size suggestions will ensure a perfect fit.
How to add drop length to square table?
For Square Tables: Multiply the drop length you want by two then add the length of the table .
Can a tablecloth make a table look awkward?
Too large, and you’ll end up with unsightly “bunching” or too much drapery around the bottom of the table. An improper size also just looks awkward, especially if there’s more tablecloth on one side of the table than the other. (Nobody wants an asymmetrical tablescape!)
What is the standard tablecloth size?
After measuring your table with a tape measure, you will want to order a table cloth that has a 30-inch tablecloth drop unless you want the tablecloth to hang all the way to the floor.
How many inches should a tablecloth be?
For a 10-inch tablecloth drop, you will want to buy a 50-inch by 50-inch tablecloth. The chart above will show you the measurements you will need for a rectangular or square table according to the amount of tablecloth drop you want.
What is tablecloth overlay?
A tablecloth overlay is a type of linen material that is used to “top off” and add an extra layer and unique look to a tablecloth. They are similar to a table runner and are normally chosen to be a contrasting color option to a tablecloth and to add another layer and more texture to the tablescape. To measure for an overlay for a rectangular table, you will want to determine the shape you want to style the overlay in for the look you are going for.
How to keep tablecloth from sliding off?
There are several things you can do to prevent a tablecloth from slipping or sliding off. You can place some type of rubber shelf liner under the table or even use gorilla grip tape to hold it in place. You can also use a heavy centerpiece or a cushioned table pad with flannel backing. You can simply use a tablecloth made of heavier material or use special clips and clamps or tablecloth weights, especially for an outdoor table.
What do placemats do for a table?
They will help protect your table from extra wear and tear and the inevitable spills that will occur when children are eating their meals at the table. You can purchase very casual style placemats or fancy cloth placemats, depending on what they will be used for.
How to measure tablecloth size for round table?
To determine what size of tablecloth you need for a round table, you will need to measure the diameter of the table. This will tell you the width of the tablecloth you will need. You should also measure the height of the table, so you can then determine the length of tablecloth you want.
How to measure for round overlay?
To measure for a round or oval overlay, you will take the measurement of the table and its mid-length to determine the size of a round overlay to purchase. For a 30-inch round table, you will need a 60-inch overlay.
