What are the different types of switch plates?
What is a wall switch plate?
What Is a Wall Switch/Outlet Cover Plate?
What is a single and ganged switch?
How many outlets can you cover in a ganged wall?
Why use a larger switch cover plate?
What is a thermoplastic cover plate?
See 2 more
Are all switch plates the same size?
There are three common wall plate sizes: standard, midsize/midway and jumbo. When selecting a size, the plate should completely cover the electrical box opening.
How wide is a 3 switch plate?
A Jumbo outlet faceplate is 5.50" tall.GANGSWIDTH2-Gang5-1/2"3-Gang7-1/2"4-Gang9-1/2"5-Gang11-1/2"6 more rows•Oct 30, 2021
What is the difference between a standard and midsize wall plate?
Standard is the most popular size for general use. Midway is slightly larger on all sides to help cover wall imperfections. Jumbo is notably larger on all sides to help cover more significant wall imperfections.
Are switch plates Universal?
No, light switches are not universal. They come in various sizes, from the standard to the more oversized ultra light switch covers.
Are light switches a standard size?
There are no specific regulations for the height of light switches.
What are standard size safety switches?
General duty switches are available with ampere ratings of 30, 60, 100, 200, 400, and 600 amperes. Heavy duty switches are rated for 30, 60, 100, 200, 400, 600, 800, and 1200 amperes.
What are the 3 types of plates used in wall framing?
Bottom Plates are used to connect the wall to the floor. Top Plates support the floor above. Usually doubled up. Sill Plates support windows and sit on top of cripple studs.
What size should a wall plate be?
Specification: Wall plate shall be 75x100mm C16 timber lined and levelled and set on full mortar bed and aligned with inner face of external wall. Wall plate shall be in min 3m lengths or, where shorter lengths are necessary, these shall be a single length extending across min 3no rafters.
How do I choose a switch plate?
Tips For Choosing the Right Switchplates and Avoiding MistakesDevice Descriptions. ... Plate Orientation Pay attention to the orientation of decorative combination plates that have different device openings. ... Color and Finish. ... Decorating On A Budget. ... Oversized Switchplates May Be Required.
Do all switch plates need to match?
In addition to going well with white plates, white switches and outlets coordinate exceptionally well with black, gray, metal, and virtually any color plates. This allows you to coordinate your outlets with your décor, instead of worrying about having them match your switches and outlets.
How thick should a switch plate be?
For MX switches, try to get 1.5mm for the top sheet, as 1/16" is slightly too thick. For Alps switches, a 1/16" plate works okay but you'll want to cut the holes slightly larger than standard in the top sheet. If you're going to hand wire, then I recommend using 1/4" or 6mm or similar for the bottom plate.
Should switch plates match the wall?
Ideally they should match the wall, or at least not stick out like the proverbial sore thumb. You can usually paint the switch plates to match the wall.
What is a standard 3-way switch?
A 3-way switch is larger than a single pole switch and has three screw terminals for wiring connections, plus a ground. Two of these take traveler wires that go from one switch to the other. For the third terminal, one switch is connected to the hot supply wire while the other switch is joined to the light.
Is 3 pole the same as 3-way switch?
Three pole or three-way switches are used to control one or more lights or fixtures from multiple locations, such as the top and bottom of a flight of stairs.
What is the size of switch board?
The frame of the switchboard houses and supports the other components. The standard Siemens switchboard frame is 90 inches high and 32 or 38 inches wide. An optional height of 70 inches with widths of 32, 38, or 46 inches is also available. Siemens switchboards have a depth measurement ranging from 20 to 58 inches.
How wide is a toggle switch?
Standard toggle light switches (both with and without a rim around the base) fit a standard toggle switch plate opening, which is 7/16" wide by 15/16" high. Toggle dimmers have a slimmer switch with a slide control on the side, and also fit the toggle switchplate's rectangle opening.
How many switch plate configurations are there?
Shop by Size - Click Light Switch Plate Configurations to select from 400+ of switch plate configurations in nearly 20 quality metal finishes.
How deep are switch plates?
Regular Switchplates are a standard 4-1/2" high and 5/32" deep; width varies based on the number of gangs:
What is non-tarnishing on switch plates?
Non-Tarnish - All plates have non-tarnishing finishes unless as specifically noted ( raw brass switchplates ). Bronze and brass switchplates in all finishes have a lacquer coating.
What is the shape of a telephone jack?
Sometimes, the telephone electrical fittings are attached to the plate itself and the jack opening is the shape of a rectangle with a small notch below. These types of plates can usually be replaced with our Telephone Jack 1, Telephone Jack 2 and Telephone Jack 3 plates by switching to the modular phone jacks. We carry the phone modular jacks, Ethernet jacks and cable jacks in white, ivory, gray and black here: Decorator Modular Phone Jacks and Cable Adapters.
What is an outlet?
OUTLET - We use the term "Outlet" to refer to electrical receptacles, plugs, sockets, and duplex plates with two rounded openings (1-1/8" h x 1-11/32" across at their widest). We use the term "Rocker" to refer to block, Decora, slider, GFI, GFCI, or wide size openings (1-5/16" x 2-5/8"). Shop for Electrical Outlets
How far apart are switchplates?
Switchplate openings are 1-13/16" apart, center to center, from gang to gang.
What is a gang plate?
GANG - The term "gang" refers to the width of the plate. A standard single-gang plate is 2-3/4" wide and houses 1 device. A 2-gang plate is 4-1/2" wide and houses 2 devices. A 3-gang plate houses 3 devices, and so on.
How wide is a standard light switch cover?
These cover plates measure 4.5 inches high and 2.75 inches wide and are the industry standard. They are the most economical, usually costing less than a dollar apiece even at the priciest hardware store.
How big is the cover plate on a toggle switch?
The switch opening is approximately 1 inch by 1 inch and fits the toggle switch and the rotary dimmer mechanism. The outlet opening measures 1.12 inches across and 1.33 inches for each individual plug.
What is a four gang light switch cover plate?
A four gang light switch cover plate accommodates four toggle switches but can easily switch to a combination setup. You can exchange a GFCI outlet or data port since the assembly measures 4.17 inches by 1.38 inches.
What is a decorator plate?
Decorator combination plates are more uniform than standard plates, as the openings are all the same size. You can use this plate for multiple light switches as well as combining rocker switches, modern outlets and specialty ports . The inside openings of the decorator combination plates measure approximately 1.13 inches across and 2.5 inches high.
What is a light switch cover?
Light switch covers are wall plates that cover the switch mechanism and electrical wiring that operate the installed electrical fixtures. Their primary function is to protect the wiring and prevent electrocution, and most have a plain design that blends in. However, there are lots of different designs, types, and combinations that combine form, function, and even fashion.
What is a combination cover plate?
Combination cover plates can also have custom combinations of switch and outlet types. You can arrange toggles, duplex outlets, rocker switches, and GFCIs outlets that can sit in whatever configuration is desired. As with standard plates, decorator combination plates match the dimensions of multiple gang cover plates, with a 4.5-inch height.
What do light switch cover plates look like?
You can find cover plates that look like ornate picture frames, stick figure people, animals, plants, and even guitars.
What are the different types of switch plates?
Wall switches and outlet cover plates cover switches and outlets on walls and also those built into furniture, such as kitchen islands or other types of cabinetry. There are a few types of switch and plate covers, including: 1 Toggle wall switch plates for switches that flip up and down 2 Rocker wall switch plates, with a large rectangular opening, work with rocker, dimmer, slide, and tap switches 3 Outlet cover plates 4 Combination switch and outlet cover plates (for example a toggle switch and outlet or a toggle and rocker switch) 5 Ganged wall switch and outlet cover plates (to cover two, three, or four switches or outlets in a row)
What is a wall switch plate?
Wall switches and outlet cover plates cover switches and outlets on walls and also those built into furniture, such as kitchen islands or other types of cabinetry. There are a few types of switch and plate covers, including: Toggle wall switch plates for switches that flip up and down.
What Is a Wall Switch/Outlet Cover Plate?
A wall switch or outlet cover plate is a cover plate used to conceal a wall switch or an electrical outlet.
What is a single and ganged switch?
Tip. There are single and ganged switches and outlet cover plates that also protect USB ports and other data jacks located directly on the wall or other surfaces.
How many outlets can you cover in a ganged wall?
Ganged wall switch and outlet cover plates (to cover two, three, or four switches or outlets in a row)
Why use a larger switch cover plate?
Use of a larger switch or outlet cover plate can save time and effort in non-standard applications where you would otherwise have to patch, sand, and/or repaint the wall around an outlet or switch to use a standard plate.
What is a thermoplastic cover plate?
Thermoplastic cover plates are made of durable nylon that won't typically crack. They typically come in standard colors such as white, beige, black, and other neutral colors.
