What are the standard dimensions of a toilet?
What is the Minimum Size for a Toilet Room?
- Distance from Toilet Centerline to Nearest Obstruction. According to building code requirements, homeowners need to maintain at least 15 inches of space between a toilet and the nearest obstruction.
- Distance from Edge of Toilet to Wall. ...
- Space in Front of the Toilet. ...
- Toilet Paper Holder Location. ...
Are toilet tanks universal fit?
When asking the question is a toilet tank universal, the short answer is no. While in certain brands they can be interchangeable, the overall consensus is that your toilet tank is fitted to your toilet model. When looking to purchase a new tank, you need to learn the measurements and model number.
Are all toilet gaskets the same size?
Toilet traps are not the same size. They range in size from 1 3/4″ for some older toilets, which is large enough for most household needs, to over 4″ in hospital toilets, allowing the disposal of larger waste products. This answer is rather broad, I know, but covers the scope of the question.
How to measure for a replacement toilet?
Measurement for a Toilet From a Wall
- Toilet Measurements and Depth. Toilets have many standard measurements, including height, width and depth or length. ...
- Toilet Position from the Wall. While the toilet itself does not have to be positioned any set distance from the wall, enough room behind the base of the toilet for ...
- Drain Centerlines. ...
- Measuring Existing Drains. ...
Are toilet tanks different sizes?
Toilet tank sizes vary depending on the type of toilet you have. Toilets come with one of three flushing systems; dual flush, gravity, and pressure-assisted. Generally, toilet tank sizes are universal within these flushing system categories, unless you have a custom toilet.
How many gallons is a standard toilet tank?
Pre-1982 toilets likely hold 5 to 7 gallons, toilets between then and 1993 likely hold 3.5 gallons, and new toilets hold 1.6 gallons or less.
How do I measure for a replacement toilet tank?
A toilet tank's height is measured from the floor to the top of the toilet tank. Place the end of the tape measure on the floor, and take the measurement at the very top edge of the tank lid. Toilet bowls and seats are either round or oval.
Are toilets standard sizes?
The standard rough-in dimensions for toilets is 12-inches. A distance of 10-inches or 14-inches is occasionally found in small bathrooms or older homes.
What does 1.6 gpf toilet mean?
High MaP test score. Maximum performance (MaP) testing conducted by independent agencies determines how much solid waste a toilet can handle. A rating of 350 to 600 grams for a 1.6-gallon flush is good, although some toilets can handle up to 1,000 grams (2.2 pounds!) using only 1.28 gpf.
Can I fill my toilet tank with water?
The toilet tank is not filling back as usual. Every time you flush, toilet tanks are supposed to refill with water. The water level should be about a half inch below the overflow tube and take around 10 seconds to refill.
Can you just replace a toilet tank?
Replacing a toilet tank is a task most homeowners can do without a call to the plumber. Because the tanks and bowls may be sold separately, you can often buy just the tank. However, it is important to match the toilet manufacturer and model to ensure proper installation and function of the toilet when you're done.
Can you mix and match toilet bowls and tanks?
There are a few models that can interchange tanks and bowls, but most are configured to work as a set, as indicated in our product showcase. If you mix and match yourself, the toilet may not flush at all. Tanks and bowls can not be mixed.
How do I know if my toilet is 10 or 12?
If your toilet has four bolts rather than the standard two, you'll measure to the center of the rear bolts. The standard rough-in measurements are 10, 12 and 14 inches. If your measurement is in between these intervals, round your number down to the nearest standard measurement.
What are the different toilet sizes?
The general rule of thumb for standard toilet sizing is between 27 and 30 inches deep, the back height is usually between 21 to 31 inches and the width is about 20 inches. It is also important to note that an ada compliant toilet must be of 17 to 19 inches in seat height.
Can you replace a 10 inch rough-in toilet with a 12-inch rough-in toilet?
Ideally, the toilet's rough-in should match the rough-in for your bathroom plumbing. However, even if a toilet is designed for a 10-inch rough-in, you can still install it into a space that has a 12-inch rough-in.
How do I know which toilet to buy?
Always buy a toilet with the correct rough-in.To determine the size of your toilet rough-in, measure from the wall behind the toilet to the bolt caps of your current toilet. ... Most toilets are available in a 12-inch rough-in, which is the standard distance, but a 10- or 14-inch rough-in may be needed in some homes.
What is the capacity of a flushing tank?
Flush tanks available in modern design and colour to match your sanitary ware fittings. Available in 5 to 10 litres capacity.
How much water is in a toilet back?
The water in the tank should rest 1–2 inches (2.5–5.1 cm) below the fill valve and overflow tube (the large open pipe near the center of the tank). If it seems higher or lower than this level, your water level may be off-balance.
How much water does a dual flush toilet use?
Dual-flush toilets use even less than the average, around 1.28 gpf, when averaging the full flush and the half flush combined. Typically the solid waste button will perform a regular flush (1.6 gallons) and the liquid waste will only use half the amount of water (0.8 gallons).
How much water does a toilet flush?
The amount of water it takes to flush a toilet varies by model. Older toilets may use 7 gallons per flush, while newer toilets may use just 1.6 gallons.
What is the standard size of a toilet?
The general rule of thumb for standard toilet sizing is between 27 and 30 inches deep, the back height is usually between 21 to 31 inches and the w...
What are the different types of toilets?
There are various different types of toilets. Broadly, we can categorize them as low-level toilets, close-coupled toilets, back to wall toilets, an...
What's the difference between a back to wall toilet and a wall hung toilet?
The main difference between a back to wall toilet and a wall hung toilet is that a wall hung toilet appears to be suspended above the floor, withou...
How do you measure a toilet?
To measure the width of a toilet, go from the left edge to the right edge of the toilet tank or the toilet seat -whichever is widest. For the depth...
What is the minimum size for a toilet?
The minimum space required for a toilet is 38 cm from the nearest obstruction. This means the toilet must have at least 38cm clearance from its cen...
How much space do you need to put in front of a toilet?
Start from the front of the toilet bowl to the end of your tank. It’s recommended that you leave a minimum space of 24 inches in front of the toilet. This guarantees that there will be enough space to walk around in front of your toilet and that your bathroom door wouldn’t keep hitting the toilet, assuming the toilet is situated beside the door.
How high is the rim of a toilet?
The rim is 16.5 inches above the floor. This height permits the majority of average height to tall adult users to sit much easier on the seat. Also, unlike the majority of close-fitting toilets that feature a tank beneath the toilet bowl, this toilet type permits a long secondary unit at the rear of its toilet bowl.
How far should a toilet seat be from the floor?
To be ADA compliant, the distance from the floor to the peak of the toilet seat should be between 17”-19”. This is about 43.1-48.3 cm. Note that this distance is measured to the top of the toilet seat and not to the rim of the toilet bowl. Until recent times, standard toilets were about 15 inches long, that’s about 38.1 cm. This was a few inches shorter than ADA accessibility requirements.
How wide should a toilet be?
Toilet Breadth. Start from the left corner to the right corner of the toilet rim (the widest parts of the rim). Your toilet needs to have a minimum space of 30 inches regardless of its location within your bathhouse.
What are toilets made of?
Toilets are one of the most common fixtures found in every bathroom. Toilet parts are typically made up of a toilet bowl, a tank, a seat, and a seat cover. Over the years, the world has seen many toilet brands and several types of toilets, starting from pit latrines, chemical toilets to today’s more sophisticated water cisterns and smart toilets.
How big is a standard toilet?
Standard toilet sizes are usually between 27 to 30 inches deep; that is 69 to 76 cm, about 20 inche s in width, i.e., 51 cm, between 27 to 32 inches in height (68.5 cm to 81 cm), and features a rough-in of anywhere from 10-12”. You won’t want to have a large toilet in a tiny bathroom, so the dimensions of your toilet are important.
What is the rough in of a toilet?
The rough-in measurement of a toilet describes the distance from the back wall to the middle of the drainpipe at the bottom of a standard toilet. The rough-in measurement of a regular toilet design is usually 12 inches, which is 30.5 cm.
What is the most important thing to look at when buying a toilet?
While extra features and components are fun and important, the most important thing to look at is toilet dimensions . After all, you don’t want to get a toilet with an elongated seat if your bathroom is narrow.
How high is the top of a toilet tank?
Here, the top of the tank reaches an ample 30.75 inches above the finished floor.
What is the difference between a full flush and a half flush?
At the top of the tank, you’ll notice that there is a button for a “Half Flush” and a button for a “Full Flush”. Half flushes use significantly less water and ideal for removing liquid waste while full flushes are powerful enough for the thorough removal of other waste.
How to measure the width of a toilet?
To measure the width of a toilet, go from the left edge to the right edge of the toilet tank or the toilet seat -whichever is widest. For the depth go from the front of the toilet rim to the back of the toilet and for the height go from the floor to the rim of the toilet seat, then from the seat to the top of the tank.
How long is a 2 piece toilet?
The toilet seat itself spans 18.5 inches long and is just under 14 inches at its widest. In addition to being long, the Back-to-Wall Elongated 2-Piece Toilet also has some notable height advantages. The seat itself is 16.5 inches above the finished floor.
How long is a toilet seat?
But note that this toilet would feel cramped in many smaller half baths. The toilet seat itself spans 18.5 inches long and is just under 14 inches at its widest.
How deep is a standard toilet?
The general rule of thumb for standard toilet sizing is between 27 and 30 inches deep, the back height is usually between 21 to 31 inches and the width is about 20 inches. It is also important to note that an ada compliant toilet must be of 17 to 19 inches in seat height.
How to measure the height of a toilet?
Toilet Height. Measure from the floor to the top of your toilet seat. Then measure from the floor to the top of your toilet’s tank to make sure your new toilet can fit into the same space or under any an over-the-toilet storage racks that you do not want to get rid of.
How to measure seat height?
Seat height is measured from the floor to the top of your toilet seat. When choosing a seat height, consider your height and physical needs. There are two types of seat heights: standard and chair.
How much space do you need for a toilet?
Measure from the front of the toilet rim to the back of the toilet. We recommend having at least 24" of space in front of a toilet. This ensures you will still have plenty of room to move around in front of your toilet and that your bathroom or shower door will not hit it if the toilet is placed near the door.
What is the most important thing to know when looking for a new toilet?
One of the most important aspects in searching for a new toilet is its size and dimensions. Read our guide to learn more about the features that impact standard toilet dimensions, how to measure a toilet, and how to use this information to ensure a smooth installation and bathroom layout.
How to measure length of toilet tank?
The length of the toilet tank, from one side across to the other, is measured from the edge of the toilet tank lid in most cases, unless noted by the manufacturer. Or, if your tank does not include a lid, the dimensions indicate the length from the side wall of the tank to the sidewall of the tank and do not include the lid.
How big is a toilet tank?
Large toilet tanks range in size as well but typically measure from 16 3/4 inches to 18 inches wide. The additional length adds capacity to the tank, however, the actual amount of water the tank holds depends on where the user sets the float ball.
How to fit a toilet into a tight space?
If you need to fit the toilet into a tight space along a wall, you have to know the tank length to fit the toilet between two items such as the cabinet and bathtub or the cabinet and wall. If you plan on squeezing the toilet into a corner, knowing this dimension tells you how much space on the other side you have for additional items.
How much does a lid add to a tank?
A lid may add an additional 1 or 2 inches, depending on the thickness of the lid sidewalls and its design. For instance, if the lid fits over the sides of the tank, it adds additional length to the tank. If the lid mounts flush to the tank, it does not add length. Advertisement.
How long is a small tank?
Small Tank Lengths. Tanks come in a few different sizes, and one of them is small. Small tanks vary in size; however, one standard length is 15 1/8 inches. It is common to see these tanks on toilets with bowls and seats of a similar size. When the toilet bowl and seat are the same width, it is easy to plan your installation because you only have ...
What is Steve Smith's career?
Steve Smith has published articles on a wide range of topics including cars, travel, lifestyle, business, golf, weddings and careers. His articles, features and news stories have appeared in newspapers, consumer magazines and on various websites.
Is it hard to install a toilet in a small bathroom?
Toilets come in different sizes. Image Credit: krblokhin/iStock/GettyImages. Installing a toilet is a difficult task that only becomes more difficult in a small bathroom. By learning a few important dimensions, you'll find the project becomes much easier.
How wide is a toilet seat?
In the US toilets have a standard bolt spread of 5.5 inches while in Europe it can go up to 6.5 inches. Toilet bowls have a width of between 14 and 15 inches.
What is the difference between a round and elongated toilet seat?
Toilet seats just like toilet bowls are either round or elongated. An elongated bowl will need an elongated toilet seat while round toilet bowls will need round toilet bowls. To measure a toilet seat, you will actually need to measure the toilet bowl where the seat will be installed on.
What is the shape of a toilet bowl?
Toilet Bowl Shape. Toilet bowls come in two shapes: round and elongated. Round toilet bowls are circular in shape while elongated bowls are oval-shaped. To determine the length of the toilet bowl, measure the distance between the center of the toilet seat mounting holes and the front of the toilet bowl. To do this, the toilet seat must have been ...
How long is a round toilet bowl?
Elongated toilet bowls have a length of around 18.5 inch while round toilet bowls have a length of about 16.5 inch. Round toilets therefore are more space economic but less comfortable than elongated toilets which take up more space.
How many inches does a toilet bolt have?
Please note that sometimes these bolts are covered with plastic caps. The standard rough-in of most modern toilets is 12 inches.
How tall is a toilet seat riser?
Toilet seat raisers have a height of 2 to 7 inch. A toilet seat riser can be a simple portable one, a toilet seat riser with arms or a toilet seat riser with a safety frame. This seats come in handy especially when someone is recovering from a knee or hip surgery.
What is rough in toilet?
The rough-in of a toilet is the distance between the rear finished wall of the toilet and the center of the drainpipe. You must always ensure that you measure from the finished wall and not the baseboard.
What is the flushing system for a toilet?
Toilets come with one of three flushing systems; dual flush, gravity, and pressure-assisted. Generally, toilet tank sizes are universal within these flushing system categories, unless you have a custom toilet. Further on in this article, you will find information to help you find, purchase, and install a new toilet tank ...
What size bolts are used for toilets?
Similar sized toilets may share bolt and hole sizes while a custom toilet may use unique sizes. But usually, the size of a bolt is 1/4th inch, and the 5/16th size is also common.
What is a gravity toilet?
Gravity toilets are probably the model of toilet that is most frequently used in homes today, so there’s a pretty good chance that this is the type toilet you have. Gravity toilets flush by using gravity (hence the name) to facilitate the movement of water from the bowl into the sewage system. 3.
Where is the flushing mechanism on a toilet?
In this type of toilet, the flushing mechanism is found on the top of the tank in the form of two buttons. These control how much water is used to flush the toilet.
Is a toilet tank universal?
When asking the question is a toilet tank universal, the short answer is no . While in certain brands they can be interchangeable, the overall consensus is that your toilet tank is fitted to your toilet model.
Can you order Kohler tank online?
If you feel uncomfortable with online shopping, then a trip to the local hardware/home improvement store is in order. If they do not have the tank you need, they probably can order it for you. You can also order online for pick up in-store if the store of your choice offers that service.
What does it mean when a toilet is bigger?
Since the toilet size refers to the inside pipe diameter, this means the drain hole cut-out inside the tank will naturally be larger. How much larger depends on the initial hole cut-out and the after-cure tolerance of the ceramic or plastic composite during manufacturing.
What size hole is flush actuator?
The flush actuator mount hole can be a little tricky sometimes because there are two commons sizes, 5/8″ and 3/4″ square, which will also vary a little due to the same manufacturing tolerances. Most flush actuators, whether lever handle or push button, will have a removable rubber collar that will accommodate both sizes.
What size is a standard toilet?
Toilet Sizes . . . Most common standard toilets are generally considered to be either “2-inch or 3-inch” by naming convention. This refers to the INSIDE pipe diameter within the toilet and down through the floor drain.
Can you enlarge a hole in a ceramic file?
Anytime a non-standard smaller hole size is encountered, there is always the option of enlarging it with a ceramic file or grinder. This may sound like a lot of work, but in most cases, the hole only needs to be enlarged slightly and the ceramic or plastic composite usually cuts away fairly quickly and easily.
Why do people use toilet rooms?
Additionally, toilet rooms allow you to keep your master and other bathrooms private if you choose to do so.
How high should a toilet paper holder be?
However, the code does offer recommendations that could help you optimize the layout of your toilet room. The latest guidelines suggest placing the toilet paper holder between 8 and 12 inches from the front of the toilet seat. Additionally, they suggest placing the holder at a height of between 26 to 30 inches.
How much space do you need between a toilet and the nearest obstruction?
Distance from Toilet Centerline to Nearest Obstruction. According to building code requirements, homeowners need to maintain at least 15 inches of space between a toilet and the nearest obstruction. That obstruction could be a wall, a cabinet, or another fixture that you want to install.
How wide should a toilet room be?
If you fall into this category, then there is are recommended toilet room dimensions that may be worth following. Experts recommend making the room at least 30 inches wide. This will make your toilet room six inches wider than the minimum standard. It will allow people of all sizes to use the room more comfortably.
How much space do you need between a toilet and a wall?
You also need to make sure that there are at least 4 inches of space between the far edge of your toilet and the wall. This means that you need at least 30 inches of space to accommodate a toilet without violating the building code requirements.
How much space do you need for a toilet?
At a minimum, you need to have at least 15 inches of space from the centerline of the toilet to the nearest cabinet or wall.
What is a water closet?
When you see it, don’t worry. The term water closet means the exact same thing as a toilet room. You should just consider the terms interchangeable as you continue your research.
