what is the standard tub size

Typical Bathtub Sizes

Type of Bathtub	Length	Width	Height
Alcove Bathtub	60 inches	30 inches	18 inches
Drop-in Bathtub	45 to 72 inches	30 to 32 inches	14 to 20 inches
Oval Bathtub	60 inches	41 inches	24 inches
Whirlpool Bathtub	60 inches	32 inches to 36 inches	18 inches to 23-1/4 inches

May 30 2022

Full Answer

How to tell if the standard bathtub size suits you?

Standard Bathtub Sizes: Reference Guide to Common Tubs

• Alcove Bathtubs. In the context of a bathroom, an alcove is defined as a space bounded by three walls, and this is often the most logical way position the bathtub ...
• Small Alcove Bathtubs. ...
• Moderately Sized Bathtubs. ...
• Long Bathtubs. ...
• Drop-In Bathtubs. ...
• Oval Bathtubs. ...
• Whirlpool Bathtubs. ...
• Corner Bathtubs. ...
• Freestanding Bathtubs. ...

What is the lowest height for a bathtub?

Bathtub Sizes & Dimensions: Guide to standard tub sizes

• Alcove Tubs. One of the most common tubs, an alcove tub, sits at the end of a small bathroom width wise, flanked by three walls.
• Drop In Bathtub. ...
• Undermount tub. ...
• Whirlpool Tubs. ...
• Stand Alone Bathtub. ...
• Corner Bathtubs. ...

What are the dimensions of a standard shower tub?

• Length: 60 inches
• Width: 32 inches to 36 inches
• Height: 18 inches to 23 1/4 inches

What is the average height of a tub?

Walk-in tubs are usually alcove style and are generally the same average size of 60 inches in length and 30 inches in width. They differ in their height, however, which is normally around 30 inches to provide depth enough for the bather to be comfortably submerged while sitting on the built-in tub bench.

What is the ideal bathtub size?

An average size (60-inch-long, 32-inch wide, and 18-inch-deep) alcove tub works in most bathrooms.

What are the dimensions of a standard size tub?

The standard tub size for an alcove fixture is 60 inches long, 32 inches wide, and 18 inches deep.

How big is a 2 person bathtub?

Common freestanding bathtub sizes for 2 people A medium sized two person bathtub starts at around 66.9 inches long with a width of 33.5 inches and a height of 22 inches. The largest of the medium sized bathtubs comes in at 70 inches with a width of 35.4 inches and a height of 22.5 inches.

How do you measure for a new bathtub?

0:001:00How to measure a bath - YouTubeYouTubeStart of suggested clipEnd of suggested clipNo measure from the back wall or edge to the front this will give you the width. Then on theMoreNo measure from the back wall or edge to the front this will give you the width. Then on the exterior of the bath measure from your floor to the top edge. Giving you the height.

How wide is a small tub?

Some small tubs have an interior soaking width of 22 inches. Actually getting inside the tub before you buy is a good idea to ensure that a small tub will work for you. Small tub length: 43-55 inches. Small tub width: 30 inches. Small tub height: 14-15 inches.

How long is a standard tub?

If you like taking nice long baths, this is probably your most economical option, though you might need to replace the tub surround or tile. Standard tub length: 60 inches (5 feet) Stand tub width: 32 inches. Standard tub height: 18 inches.

How tall is an undermount tub?

While undermount bathtubs might not be obviously more expensive than an alcove, they require more expense in labor and materials framing for the tub and tiling or stone. Undermount tub length: 60 inches. Undermount tub width: 30 inches. Undermount tub height: 16 inches.

What is an alcove tub?

One of the most common tubs, an alcove tub, sits at the end of a small bathroom width wise, flanked by three walls. An alcove tub has one finished side. The other three sides are unfinished, usually with a small lip for tiling over to prevent water damage.

How deep is a soaking tub?

The shortest tubs are 14 inches tall, but only have about eight inches of soaking depth. A shallow tub like this is fine for people who mostly shower, bathe children, and don’t want a tall tub to step in to.

Why do whirlpool tubs keep water hot longer?

If you like taking a nice long soak, whirlpool tubs often keep the water hot longer because of the water movement. There are a variety of jet options that can blow water or just air.

How wide is a Whirlpool jet tub?

Tubs that cycle water cannot have soap or salts going through the jet tubes. Whirlpool tub length: 60 inches. Whirlpool tub width: 32-36 inches.

How long is a large tub?

Large tubs: Length – 72 inches (6 feet) Width – 32 inches (2.6 feet) Depth – 20 inches (1.6 feet) Whether you have a small bathroom or a large master bathroom, a bathtub is an essential amenity. It feels great to lay in that soaking tub at the end of a strenuous day.

How long is a freestanding bathtub?

Length – 72 inches (6 feet) Width – 72 inches (6 feet) Depth – 20 inches (1.6 feet) 4. Freestanding Inset. This is a type of bathtub that defines luxury at its best. As the name suggests, it is a freestanding and inset combo. What it means is, these tubs do stand-alone on the bathroom floor.

What is a walk in bathtub?

The walk-in bathtub is similar to the Alcove tub, except it features a small door on the side. These soaking tubs are ideal for those who have neurological or mobility disorders. The bather can simply open the door and walk into the tub. This is also an ideal addition for any bathroom as it reduces the chances of slipping while getting out of the tub.

What is a freestanding inset tub?

The most coveted Freestanding Inset type of bathtub, however, is the Whirlpool tub style .

What is a corner tub?

While the standard bathtub is shaped as a rectangle, the corner tubs come in variations of triangular or polygonal forms. The corner tub is great to facilitate a soak for hydrotherapy.

What is a sunken tub?

These Sunken style bathtubs are ideally suited for a Master bathroom as they take up a lot of space. Additionally, since they are placed below floor level, so you need to ensure that you have the space to install them. They are great additions to a large bathroom on the ground floor that can be doubled as a lounging center with a steam shower and overhead faucet system.

What is clawfoot tub?

The clawfoot tubs still follow a rustic, authentic design, albeit with a modern touch of designing the “claws” with a cast iron setting to make the bathtub aesthetically pleasing. The freestanding bathtubs come in a variety of sizes. You can choose the right bathtub size as per your bathroom layout and size.

What is a freestanding bathtub?

1. Freestanding bathtub. Freestanding tubs are among the easiest to recognize. As the name suggests, they are freestanding units that are not attached to any walls. They are often placed in the center of a bathroom and can create a striking effect of luxury and opulence.

When measuring a bathtub, do you measure from the same point?

When measuring, make sure that you measure from the same point on each side or at each end. If not, you will end up adding extra length or width to the true dimensions. When you have taken these measurements and you are sure about their accuracy, you are ready to start shopping for a new bathtub.

What is an undermount tub?

Undermount tubs are similar to drop-in tubs but are fitted into a deck that’s usually made of a material like tile or stone. They can be a striking visual element in your bathroom, creating a lavish feel, but installation is more expensive.

What is an alcove bathtub?

Although there is no such thing as a “standard” tub, the alcove bathtub is probably the design that comes closest to fitting this description. They are usually enclosed by three walls in an alcove, hence the name.

What are the sizes of a sleeve?

Although these are not the only possibilities, the most common sizes are as follows: 1 Small: 48” x 48” x 18” high 2 Medium: 60” x 60” x 20” high 3 Large: 72” x 72” x 20” high

Do you need to take measurements before buying a bathtub?

These measurements are only guidelines since each manufacturer produces bathtubs with slightly different dimensions. However, what is more important is that you take accurate measurements of your space before buying a tub.

Can you put a freestanding bathtub in the center of a bathroom?

As long as you have enough space in your bathroom, you don’t have to worry about the exact dimensions. Having said that, bear in mind that placing a freestanding bathtub in the center of a space that is too small to accommodate it will have a negative effect.

How wide is a bathtub?

For a typical standard, wall-wall bathtub, the measures will be roughly 60 inches long, 30-32 inches wide.

How deep is a freestanding bathtub?

Common or standard dimensions for a freestanding bathtub are: 60 inches long (5ft), 30 inches wide (2.5ft) with 19 inches of water depth (1.89ft). Small freestanding bathtubs can run 55 inches long(4.58ft), 27 inches wide (2.25ft) with a water depth of 15(1.25ft).

What is a freestanding tub?

Freestanding tubs are tubs that are unconnected to any walls or surfaces. Depending on the material, freestanding tubs are slightly heavier and are usually distinguishable by the smooth lines and modern design. Freestanding tubs require a rather large bathroom to accommodate the size of the tub as well as the increased weight. If you’re unsure about the size of a freestanding tub and want to learn more about the materials, Badeloft offers FREE bathtub templates and material samples for freestanding bathtubs. Click HERE to request one.

What is an alcove bathtub?

Alcove Bathtub. The most common bathtub on the market, and what most people consider to be the standard bathtub. Affordable and easy to install, the only drawback is its relatively small size. Alcove bathtubs usually fit within a three wall enclosure, making them ideal for a shower combination as well.

What is a drop in tub?

Drop in Baths. Most bathtubs have a visible finished side, usually called an apron or skirt, which is flat or bowed. Drop in tubs have no finished sides and are usually installed in an alcove or peninsula jutting out in the middle of your bath space.

How deep is a corner bath?

Common size or standard dimensions of a corner bath are: 60 inches by 60 inches or 5ft by 5ft with a water depth of 20 inches (1.6ft). Small sizes run 48 inches by 48 inches (4ftx4ft) with a water depth of 18 inches (1.5ft). Large sizes running at 72 inches by 72 inches (6ftx6ft) with a water depth of 20 inches. (1.6ft).

How deep is a drop in tub?

Standard dimensions again are similar to drop in tubs running at: 60 inches long(5ft), 30 inches wide(2.5ft), with a water depth of 16 inches(1.3ft).

What Are The Standard Bathtub Dimensions?

The standard size of a bathtub gives you an idea of the space it requires in a bathroom. However, it varies depending upon the shape and type of bathtub.

How To Install A Bathtub?

Installing a tub in your bathroom can be a complex process. This means you shouldn’t attempt to get it done by yourself as a DIY enthusiast. However, if one does have construction and plumbing experience, you can get it done with a bit of guidance. Regardless, the key is to hire professionals to get the job done in the right way.

FAQs

Now that you have enough idea about the bathtub styles, dimensions, and how to install it, you might have some questions in mind. So, here are a few FAQs to solve all your queries.

The Bottom Line

Whether you have a large master or a small toilet, a bathtub is a crucial convenience. It feels incredible to sit in that moistening tub at the end of a tough day. If you have a tiny toilet, you can select from the various styles of inset and skirted bathtubs.