The top gate leaves a small nub in the middle of the top of the closure (or commonly referenced as the exterior top surface); the top gate is used with a wide range of continuous thread and deep skirt closures (screw on caps), and large size flip top closures. Inside Gate
What is another name for a gate?
Other terms for gate include yett and port. The word is derived from old Norse "gat", meaning road or path, and originally referred to the gap in the wall or fence, rather than the barrier which closed it. The moving part or parts of a gateway may be considered " doors ", as they are fixed at one side whilst opening and closing like one .
What is a top gate in construction?
Top Gate The top gate is formed through material that is injected through a pinpoint gate on the forward part of the closure.
How is the top gate of a door made?
The top gate is formed through material that is injected through a pinpoint gate on the forward part of the closure.
What are the parts of a gate?
The moving part or parts of a gateway may be considered " doors ", as they are fixed at one side whilst opening and closing like one. A gate may have a latch that can be raised and lowered to both open a gate or prevent it from swinging. Locks are also used on gates to increase the security.
What do you call the parts of a gate?
Gate frame – The structural members of the gate. Gate latch – A fitting to hold the gate in place when closed. Gate opening – The clear distance between the gate posts. Gate post – The post to which a gate is attached by hinges and latches.
What is the thing on the top of a fence called?
CAPPING is a decorative rail which sits on top of a fence panel to prevent water soaking into it. CENTRE STUMP is a piece of timber used with closeboard and palisade fencing.
What do you call the vertical bars on a fence?
Vertical members, also known as spires, are the vertical components of the fence. They are usually spaced about six inches apart and are often topped with ornamental pieces called finials.
What is the spike on a gate called?
The simple spiked top of the gate is called the spike/spear railhead but the more decorative bits are called finials.
What is a gate stile?
A stile is a device which allows people to cross a wall, fence, or hedge without allowing livestock through. Stiles are typically designed so that people do not need to open a gate or move any parts, simply walking over the stile to reach their destination.
What is the frame of a gate called?
U-Frame/ Gate Frame The U-Frame is the metal frame piece that goes down the side and across the bottom. It's the backbone of your gate.
What are parts of a fence called?
Most residential privacy or spaced picket fences are made up of three main components: Posts, Backer Rails and Pickets.Posts. Posts are the backbone of a wood fence. ... Backer Rails. Backer rails, sometimes called fence rails or fence stringers, run horizontally from post to post. ... Pickets. ... Add-On Fence Components.
What is a fence slat?
A Fence Slat (Privacy Slat) is a metal or plastic insert that turns a chain link fence into a privacy fence. Most slats are made from either aluminum or some type of plastic. Slats can be used for more than just privacy. They can be combined in different colors to make designs or for corporate branding.
What are the rails on a fence?
Fence rails are generally two-by-fours that are installed between or across posts and are often what the fence boards are affixed to. All fences will have a top and bottom rail.
Why do gates have spikes?
These spikes are designed to prevent drivers from entering through an access point where the gate may close slowly or where a gate cannot be installed. When a driver drives over traffic control spikes from the wrong direction, the spikes pierce the tires, causing them to deflate and need to be replaced.
What do you call barbed wire at top of fence?
The sharp points have the same function as the spikes you found in your dictionary - and we can call them spikes. There is a term "security fence spikes" (google the term.
How were castle gates opened?
Except for postern gates, a typical castle would have only a single entrance gate. Some had not at all - everthing that came in did so by being hoisted up over the walls, and everything that left did so be being thrown over the walls or hoisted down.
What is a fence slat?
A Fence Slat (Privacy Slat) is a metal or plastic insert that turns a chain link fence into a privacy fence. Most slats are made from either aluminum or some type of plastic. Slats can be used for more than just privacy. They can be combined in different colors to make designs or for corporate branding.
What is a fence panel?
0:124:44Fence Panels Explained - YouTubeYouTubeStart of suggested clipEnd of suggested clipFrom 2 foot up to 6 foot. They are usually finished with a factory applied. Or dip treated finish.MoreFrom 2 foot up to 6 foot. They are usually finished with a factory applied. Or dip treated finish. Which has an orange. Color.
What is a fencing rail?
Fence rails are generally two-by-fours that are installed between or across posts and are often what the fence boards are affixed to.
What is a cant rail on a fence?
Two types of rails are commonly found - arris rails with a triangular cross-section, and cant rails which are more or less rectangular with the top edge sawn at an angle to allow rainwater to run off away from the fence boards.
How is a top gate formed?
The top gate is formed through material that is injected through a pinpoint gate on the forward part of the closure. The top gate leaves a small nub in the middle of the top of the closure (or commonly referenced as the exterior top surface); the top gate is used with a wide range of continuous thread and deep skirt closures (screw on caps), and large size flip top closures.
What is a side gate?
No confusion intended here – the side gate is located on the side of the closure. The material is injected through a gate on the side of the closure; it is commonly used for multi-part dispensing closures such as disc top closures, flip top closures, sprayers, and pumps.
What is the gate mark on injection molding?
The gate mark is intended to be small and barely visible , but it does often leave a small dimple on the closure. Typically, this only creates a challenge for market applications that require a very high gloss finish for shelf appeal – or for applications in which a label will be affixed to the top of the closure.
What is an inside gate closure?
The material is injected through a gate on the inside of the closure, which leaves a mark on the inside of the closure rather than the outside of the closure. If shelf appeal is what you are after, a closure with an inside gate allows the container to have a smooth top (common requirements for cosmetic, personal care, and high end products). The inside gate is a good option if you are looking for flawless label adhesion and is primarily used for cosmetics and high end products that might not present as well with a visible gate mark on the top surface.
What is the entrance to the injection molding machine?
When manufacturing plastic caps and closures, Top gate, side gate, and inside gate all reference the location where the molten plastic material flows into the injection mold cavity, commonly known as the cavity entrance. It is the small-restricted opening connecting the runner (that’s the name for the pathway of the plastic material through the injection molding machine) to the cavity in the plastic closure molding tool. It is important to note that every injection mold design must have at least one gate and the position of the gate directly influences the appearance of the finished product.
What is a gate?
Gate - Structure that allows access through the fence.
What is a cantilever slide gate?
Cantilever slide gate - Any horizontal slide gate spanning an opening, lacking a top or bottom support within that opening. It is counter-balanced with additional framework (weight) to support the gate while it is closed.
What is a fabric fence?
Fabric - Fencing material made from wire helically wound and interwoven in such a manner as to provide a continuous mesh without kn ots or ties except in the form of knuckling or of twisting the ends of wires to form the selvage of the fabric. Fence line - The actual position of the fence.
What is fence line?
Fence line - The actual position of the fence.
What is an end post?
End post - A post that marks the end of a fence line, with holes on only one side for attaching rails. End posts are typically used as gate posts or terminal posts, such as where the fence abuts a house.
What is gauge in fabric?
Gauge - Diameter of the coated wire used to make the fabric. The finer the wire, the higher the gauge. Also the thickness of the tubing or pipe used in the framework.
What is knotted mesh?
Knotted - Mesh that is produced by knotting together steel wires that have been arranged vertically and horizontally.
What is a Gate Stop?
A gate stop is, exactly as the name indicates, a mechanism that stops your gate and prevents it from swinging out of control. This helps to protect both the hinges and the latch harm from excessive damage over time. Put simply, the gate stop creates a boundary which the door cannot travel past.
What are the different types of gate latches?
Gate latches are broken down into four main types: thumb latches, ring latches, lever latches, and bolt latches. However, when it comes to choosing the right gate latch for your fence, there are many other things to consider.
How does a gravity gate latch work?
As the gate closes, the force of the swing allows the latch arm to push past the strike plate and fall into the catch, securing the gate. This is a very desirable option as they can also be self-operated, meaning you can easily open or close it without the need for any outside intervention. These gate latches are always two-sided, due to the fact that the arm needs to fall into the strike to function properly.
What is the most cost effective gate latch?
You also have the additional option of locking them with the use of a padlock. Aside from being simple to install, the bolt gate latch is also the most cost-effective and comes in a wide array of materials and sizes to fit your needs. 2. Gravity. Gravity gate latches function, as their name suggests, by using gravity.
How does a deadbolt latch work?
The conventional deadbolt operation works by simply sliding a rod into a securing bolt that holds the gate door in position. Because it is a one-sided latch, it can only be secured from the inside of your fence.
Why is it important to have a gate stop?
In the case of an especially windy day, the force of the breeze could push your fence further than it is designed to go, resulting in damage. This is exactly why it’s important to have a gate stop, in addition to a latch. It also prevents a rolling or double gate from crashing into each other as it is closed.
What is a spring loaded gate latch?
The final category of gate latches, based on operation, is the spring-loaded variety. As opposed to using gravity to function, these latches use a spring to facilitate the closing of the gate. Though they tend to be more expensive than the alternatives, spring designs offer a smoother action on the handle when opening or closing the barrier.
Why did Nixon use the word "gate"?
Usage After Watergate. By the time of Nixon’s resignation, the use of –gate as a somewhat mocking way to suffix the names of scandals (political or otherwise) had already taken hold in the American media and continued throughout the decade.
What is the suffix for Watergate?
The Watergate Scandal. The use of the suffix –gate following a relevant word to refer to scandals (such as Irangate, or more recently, Bridgegate) has long been a media trope.
Where is the Watergate complex?
The name Watergate refers to the name of the office complex, located in the Foggy Bottom district of Washington, D.C., consisting of office buildings, apartments, and the Watergate Hotel. The -gate heard round the world. That scandal ultimately led to Nixon resigning from the presidency in August 1974. But by then, Watergate was itself used ...
Why was Bridgegate closed?
Bridgegate was the name for what was known more descriptively as the Fort Lee Lane Closure Scandal, in which lanes at the toll plaza on the upper level of the George Washington Bridge in Fort Lee, New Jersey were closed by members of the administration of New Jersey governor Chris Christie purportedly as an act of retribution against Fort Lee’s mayor, Mark Sokolich.
