Full Answer
See more
What is WatchGuard used for?
With industry-leading network and endpoint security, secure Wi-Fi, multi-factor authentication, and network intelligence products and services, WatchGuard enables more than 250,000 small and midsize enterprises from around the globe to protect their most important assets including over 10 million endpoints.
How do I use WatchGuard System Manager?
Connect to a Device with WatchGuard System ManagerStart WatchGuard System Manager.Click . Or, select File > Connect to Device. Or, right-click anywhere on the WSM Device Status tab and select Connect To > Device. The Connect to Firebox dialog box appears.
What is WatchGuard in computer?
WatchGuard, formally known as WatchGuard Technologies, Inc is a Seattle, Washington-based network security vendor. Its products are designed to protect computer networks from outside threats such as malware and ransomware. WatchGuard Technologies, Inc.
How do I open WatchGuard System Manager?
Start Firebox System ManagerFrom WatchGuard System Manager, select the Device Status tab.Select the Firebox to examine with Firebox System Manager.Click . Or, select Tools > Firebox System Manager. Firebox System Manager appears.
What port does WatchGuard System Manager use?
The WatchGuard policy controls access to the Firebox on these TCP ports: 4105, 4117, 4118. When you allow connections in the WatchGuard policy, you allow connections to each of these ports.
How do I access my WatchGuard firewall?
The URL to connect to the Web UI in your browser is:https://
Is WatchGuard a router?
Watchguard Firewall Router | Northeast IS. WatchGuard Firebox T40 tabletop appliances bring enterprise-level network security to those small office/branch office and small retail environments.
Are WatchGuard Firewalls any good?
Great value for a good SME level tool The XTM range provide us with scalable, easy to configure and manage internal firewall solution. It is feature rich, secure and a great overall solution.
What company owns WatchGuard?
Vector CapitalUnder the new agreement, Vector Capital becomes the majority owner of WatchGuard and IPW, a European fund focused on investments in software companies and a previous investor in WatchGuard, retains its interest in the company.
How do I factory reset my WatchGuard?
Reset Steps by Device ModelPower off the Firebox.Press and hold the Reset button on the back of the Firebox.While you continue to hold the Reset button, power on the Firebox.Continue to press the Reset button until the Attn indicator begins to flash.Release the Reset button. ... Wait for the reset process to complete.More items...
How do I update my WatchGuard management Server?
Update Your Managed Devices Open WatchGuard System Manager and connect to your Management Server. Select the Device Management tab. Right-click a managed device and select Update Device.
How do I open WatchGuard config file?
Open a Local Configuration FileIn WatchGuard System Manager, click . Or, select Tools > Policy Manager. The Policy Manager dialog box opens.Select Open configuration file and click Browse.Select the configuration file.Click Open. The configuration file opens in Policy Manager.
How do I factory reset my WatchGuard?
Reset Steps by Device ModelPower off the Firebox.Press and hold the Reset button on the back of the Firebox.While you continue to hold the Reset button, power on the Firebox.Continue to press the Reset button until the Attn indicator begins to flash.Release the Reset button. ... Wait for the reset process to complete.More items...
How do I install WatchGuard log server?
Configure the Log ServerRight-click. in the system tray and select Open WatchGuard Server Center. The Connect to WatchGuard Server Center dialog box appears.Type your Username and Administrator passphrase. Click Login. ... In the Servers tree, select Log Server. The Log Server page appears.
How do I set dimensions on WatchGuard?
In the Web UI, select System > Logging. In Policy Manager, select Setup > Logging. The logging settings open. Add the IP address for this instance of Dimension, and the Log Server Authentication Key you specified in the Setup Wizard, to the WatchGuard Log Server list.
What is firebox software?
Your Firebox is a powerful network security device that controls all traffic between the external network and the trusted network. If computers with mixed trust connect to your network, you can also configure an optional network interface that is separate from the trusted network.
One Common Console
Manage one Firebox appliance or hundreds from one easy-to-use console, maximizing efficiency and streamlining network administration. A clear, visually driven interface and plain-language log messages keep the guesswork out of building and maintaining a strong security and compliance posture.
Quickly Configure Multiple Appliances
Make one-touch configuration or firmware updates to all managed WatchGuard appliances to save time and ensure policies are synchronized across a distributed organization. Create policy templates from anywhere and quickly push them to multiple appliances using role-based tenants.
Easy-to-Use Templates
Apply pre-defined templates and wizards to make both setup and ongoing management simple. Different policies can be easily applied or modified, making quick work of troubleshooting, security customization, and compliance tasks.
Drag and Drop VPN
Quickly configure Branch Office VPN tunnels using an intuitive drag and drop setup process. Three clicks and your remote office is connected.
Logging and Reporting
Validate security policies and instantly make adjustments using feedback from interactive, real-time monitoring tools, including centralized logging and historical reporting. Full-featured reporting facilitates in-depth analysis of network activity, security threats, and user behaviors.
What is Watchguard System Manager?
WatchGuard System Manager (WSM) has menus and icons you can use to start other tools. WSM also has two tabs that you can use to monitor and manage your Fireboxes and environment: Device Status and Device Management.
How to search for devices managed by the Management Server?
To search for devices managed by the Management Server, select Search in the navigation pane. On the Search page, in the Search text box, type the name of the device to search for.
What is the status of WSM connection?
The Progress dialog box appears when WSM connects to your Management Server or a Firebox, and shows the status of the connection task: None, Processing, Failed, Complete.
How to see a managed VPN?
To see information about an existing Managed VPN tunnel, select a managed VP N in the Managed VPNs tree. On the Managed VPN settings page, you can review the tunnel settings. Click Configure to Quick Start — Add and Manage VPN Tunnels and Resources .
Where is the Device Management tab?
The Device Management tab has a navigation pane on the left and an information pane on the right. The navigation pane shows the connected WatchGuard Management Servers and their managed devices, managed VPNs, VPN Firewall Policy Templates, Security Templates, Device Configuration Templates, and Scheduled Tasks. If you expand a device list, you see the VPN resources (networks) behind the device. For more information, see Add VPN Resources.
Where is the output window in WSM?
The Output window appears at the bottom of WSM and shows information about connections to your Fireboxes and Management Servers. The Output window includes the connection status of the Fireboxes or servers and success or failure messages for each connection.
Can you use Device Configuration Templates to apply the same configuration settings to more than one managed Firebox?
You can use Device Configuration Templates to apply the same configuration settings to more than one managed Firebox.
What is Watchguard System Manager?
You install WatchGuard System Manager (WSM) software on a computer that you designate as the management computer. You can use the WSM tools on the management computer to manage your Firebox and get access to information such as connection and tunnel status, statistics on traffic, and log messages.
What filter policy does Watchguard use?
If you install WatchGuard System Manager behind your firewall, to use WatchGuard WebCenter, you must have the WG-LogViewer-ReportMgr packet filter policy in your Firebox configuration to open the correct ports.
WSM License Types
There are two types of WSM licenses that enable you to centrally manage your WatchGuard Firebox or XTM devices. All licenses require activation prior to use.
WSM Licensing by Model
As outlined in the subsequent table, the number of devices that can be managed for free with these licenses varies based on the device model. To manage additional devices, you can purchase an Upgrade Pack license.
What is enhanced logviewer?
Enhanced LogViewer provides a powerful adjunct to Historical Reports, allowing the user to quickly pinpoint specific security, network, or user events. Advanced search and filter capabilities, and multiple export formats, make short work of troubleshooting and analysis.
Is WSM 10 scalable?
Highly scalable logging and reporting engine, built on SQL, for a system that can grow with your business. WSM 10’s log and reporting engines are easy to use for all, and their scalability makes them ideal for larger enterprises or Managed Security Services providers.
What is Fireware OS?
Fireware (Windows executable installer) — Installs the Fireware OS upgrade file on a Windows computer. If you use Policy Manager to administer your Firebox, because the installer automatically saves the sysa-dl file for each Firebox model in the location that Policy Manager expects to find the OS upgrade file for each model, ...
Can you use Policy Manager on Firebox?
Before you can use Policy Manager to upgrade the version of Fireware OS on your Firebox, the version of WatchGuard System Manager must be the same or higher than the version of Fireware OS you want to install on your Firebox.
Does Watchguard update Fireware?
WatchGuard periodically distributes upgrades for Fireware OS and WatchGuard System Manager. If you use WatchGuard System Manager to administer your Fireboxes, you must upgrade WatchGuard System Manager before you upgrade the Fireboxes it manages. The version of WatchGuard System Manager you use must be the same as, or higher than, ...
Do you back up Watchguard servers?
If you have installed WatchGuard Servers on your management computer, we recommend that you back up the server data (if appropriate) before you upgrade.
Does Watchguard recommend a backup of Firebox?
If the current Fireware OS version is v12.2 or lower, WatchGuard recommends that you always create a backup image before you upgrade. To downgrade the Firebox to the previous version and restore the configuration in the future, you must have the backup image. For more information, see Save a Firebox Backup Image.
What is Watchguard System Manager?
WatchGuard System Manager (WSM) is the primary application for network management with your Firebox. You can use WSM to manage many different Fireboxes, even those that use different software versions. WSM includes a comprehensive suite of tools to help you monitor and control network traffic.
How to start Watchguard Server Center?
To start WatchGuard System Manager or WatchGuard Server Center from your Windows desktop, select the shortcut from the Start Menu. You can also start WatchGuard Server Center from an icon in the System Tray. From these applications, you can launch other tools that help you manage your network. For example, from WatchGuard System Manager (WSM), you can launch Policy Manager or HostWatch.
What is Watchguard Dimension?
WatchGuard Dimension™ integrates with your Fireboxes and WatchGuard servers to provide a complete, flexible, cloud-ready logging, reporting, and management solution. From Dimension, you can manage your Fireboxes, review the log messages for all your connected Fireboxes and WatchGuard servers, and schedule, view, and run reports from the log messages collected by Dimension.
What is WebBlocker Server?
The WebBlocker Server operates with the Firebox HTTP proxy to deny user access to specified categories of websites. When you configure your Firebox, you specify the categories of websites to allow or block.
What is Fireware OS?
Fireware OS is the software that runs on a Firebox. Fireware includes a Web UI that gives you an easy way to manage, and monitor each Firebox in your network. There are other tools you can use for management, monitoring, and reporting of your Firebox and any locally installed WatchGuard servers. The components you can use to manage ...
What is a host watch?
HostWatch is a real-time connection monitor that shows network traffic between different Firebox interfaces. HostWatch also shows information about users, connections, ports, and services.
What is Firebox System Manager?
Firebox System Manager gives you one interface to monitor all components of your Firebox. From FSM, you can see the real-time status of your Firebox and its configuration.
