Knowledge Builders

what is white oak wood used for

by Roman Ritchie IV Published 10 months ago Updated 3 months ago
image

Oak Wood uses

  • Commercial applications: Oak wood is very resistant to insect and fungal attacks, Because of its high tannin content. ...
  • Flooring: If you are looking for wooden flooring, then red oak (1,220 lbf (5,430 N)) and white oak (1,350 lbf (5,990 N)) can be the best option. ...
  • Marine Application: White oak is highly durable and low maintenance wood. ...

More items...

White oak is preferred for interior decorative applications ranging from furniture (especially church furniture), cabinets, millwork, and caskets to hardwood flooring.

Full Answer

What are the uses of white oak?

White Oak

  • Wood identification. Although you can find dozens of species of white oak growing nearly everywhere in the U.S., the grandest of them all is Quercus alba.
  • Uses in woodworking. ...
  • Availability. ...
  • Machining methods. ...
  • Carving comments. ...
  • Turning tricks. ...
  • Shop-Tested Techniques. ...

What are the properties of white oak?

Oak Wood uses

  • Commercial applications: Oak wood is very resistant to insect and fungal attacks, Because of its high tannin content. ...
  • Flooring: If you are looking for wooden flooring, then red oak (1,220 lbf (5,430 N)) and white oak (1,350 lbf (5,990 N)) can be the best option. ...
  • Marine Application: White oak is highly durable and low maintenance wood. ...

More items...

What is white oak lumber used for?

Since white oak has decent resistance to water and moisture, it is also commonly used for making wine barrels and boats. Other common uses of oak wood/timber include flooring, cabinetry, interior trim, boatbuilding, wine barrels, and veneering.

Is white oak hardwood or softwood?

White Oak, dimensional hardwood lumber is ready for your craftsmanship to be made into cabinets, furniture, trim, or your own special project. If you require a hardwood species not listed, or to purchase lengths longer than 12' please call us at 1-800-732-1697 or email. Sizes shown are net. Also see: Hardwood Plywood

image

What can I do with white oak?

0:401:43Woodworking Project Ideas with White Oak - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd by now I'm sure you know where this is going white oak can be used and all kinds of fineMoreAnd by now I'm sure you know where this is going white oak can be used and all kinds of fine woodworking projects like tables for chairs blanket chests all the way to custom cabinetry.

Is white oak wood expensive?

Both hardwood types are affordable, but red oak tends to be less expensive than white oak. Prices, however, do fluctuate, and red oak might become more expensive than white oak depending on lumber availability.

What is the primary use for white oak wood?

Common Uses: Cabinetry, furniture, interior trim, flooring, boatbuilding, barrels, and veneer. Comments: Strong, beautiful, rot-resistant, easy to work, and economical: white oak represents an exceptional value to woodworkers. It's no wonder that the wood is so widely used in cabinet and furniture making.

What is white oak best for?

More impervious to moisture and rot, White Oak is often used to make boats and wine barrels in addition to stunning hardwood floors.

Is white oak water resistant?

It's a proven fact that White Oak is more resistant to water than Red Oak. White Oak is a closed-grain wood with many of its pores plugged with Tyloses, making it more resistant to water, decay, and rot.

How much does white oak wood sell for?

White Oak PricingDescriptionPriceWhite Oak 4/4 thickness$3.00White Oak 8/4 thickness$4.00White Oak 12/4 thickness$5.50Wide Stock White Oak$1.50 +

Is white oak good for cutting boards?

White oak is denser than red oak and is an excellent choice for a cutting board. While any wood can be used the goal is resistance to damage caused by the knife. Hard maple seems to be the overall favorite choice.

Is white oak good for smoking meat?

WHITE OAK makes the best coals for longer burning. All oak varieties reported as suitable for smoking. Good with red meat, pork, fish and heavy game.

Is white oak good firewood?

White and Red Oak Trees produce the best firewood as they both produce a high heat value, long-lasting fire, and clean burn. The best oak trees to burn are the Shumard Oak, Black Oak, Willow Oak, Pin Oak, Cherrybark Oak, Oregon White Oak, Post Oak, Bur Oak, Chestnut Oak, and Swamp White Oak.

Is white oak a good wood to cook with?

White Oak Is Denser Than Red Oak Dense wood is great for firewood because it creates better heat production.

Is white oak wood rare?

White Oak has long been considered one of the preeminent hardwoods of Central & Eastern America. The trees commonly live for hundreds of years, if left undisturbed....Vital Statistics.Main Color GroupLight BrownJanka Hardness - N59904 more rows

How strong is white oak?

Durable Flooring The Janka hardness scale is a measure of durability for wood species. White oak receives a Janka hardness score of 1360, which makes it harder than red oak, white ash, American cherry and American walnut. This means that it will withstand daily use well, without a lot of denting or dinging.

Why is white oak so expensive?

The inventory is low, the demand is at an all-time high and so are the prices. Many are surprised to learn that the availability of white oak is not the issue— as many as 5.2 billion white oak trees cover 235,000 square miles in the United States.

What wood is most expensive?

African Blackwood It is considered as the most expensive wood in the world because not only it is challenging to work with hand or machine tools, its trees are already near-threatened. But as expensive as it may seem, African Blackwood is worth the price.

Is white oak in high demand?

There's a high demand for white oak lumber that is putting pressure on sawmills and logging crews all over the country. The reasons are numerous: foreign consumption and the current building boom, as well as a growing consumption of bourbon worldwide.

Does white oak turn yellow?

White Oak. The light brown to darker tones of White Oak undergoes a medium degree of color change with slight ambering over time.

White Oak Appearance

The white oak wood, fine-grained with a medium-to-coarse texture, is one of the most common hardwoods in North America. It is a hardwood that has a light to medium brown color. It often has a reddish hue, and the grain can be quite pronounced. The wood is sometimes mistaken for red oak, but it is actually lighter in color.

What Are the Other Types of White Oak?

There are several different types of white oak (Quercus Alba), including Northern White Oak, Arizona oak, Southern White Oak, and Rocky Mountain White Oak. Each type has its own unique properties and characteristics, so it is important to determine which type of oak you are working with before beginning your project.

Where is White Oak Grown?

White oak is grown throughout the United States and in parts of China. The wood grows best in areas that have cool climates with large amounts of rainfall, like coastal regions and mountainous regions. It is also considered a pioneer species due to its ability to grow quickly on forested land following deforestation or fire damage.

White Oak Uses

White oak is a versatile type of wood that can be used for a variety of purposes. It is often used in flooring, cabinetry, railroad ties, boat building, and furniture. White oak lumber is also popular for use in construction projects due to its strength and durability.

Stave oak

Stave oak and white oak are two names for the same type of wood. White oak is named for its light color, whereas stave oak is named after how it was traditionally made (staves).

Advantages of Using White Oak Wood

White oak wood is a popular choice for furniture and flooring because of its many advantages. It is strong, long-lasting, straight-grained, and resistant to moisture content, making it a good choice for high-traffic areas. It also has a beautiful natural grain that makes it a popular choice for cabinetry and other decorative applications.

Conclusion

White oak is a versatile and popular type of wood that can be used for many purposes. It is strong, durable, resistant to moisture, and has low emissions when burned.

What is white oak?

White oak is fairly straight-grained and is a favorite material used in many types of fine furniture. It’s usually available quarter sawn. The grain in quarter sawn white oak has a striking ray flake pattern.

What is oak used for?

Oak is among the finest materials used for top quality woodworking projects. This hardwood is strong and beautiful, especially when properly finished. There are many varieties of oak, and it helps in woodworking to know the distinctions of and differences between the various types of stock.

What is the best way to seal oak?

Oak is typically sealed with the use of shellac. Digital moisture meters with wood-friendly pinless scanning are among the many types of moisture meters which can be used to ensure that the oak you’re building with has an appropriate level of moisture content.

Why does oak chip easily?

Patience and finesse are required in working with oak. This hardwood can split or chip easily when routing along the edges, because of its heavy graining.

Is red oak a porous wood?

Red oak is porous and has open grains. It’s more prone to shrink than white oak. Compared to birch or maple, red oak finishes and stains easily and doesn’t have blotching problems. Because the open pores in red oak absorb stain, the grain patterns become very evident when a dark stain is used as a finish.

Can you sand out burn marks on oak?

Oak is a type of hardwood that dulls tools more quickly than other common materials. When working with oak, sharpen your tools and keep them honed because oak is highly susceptible to burning. Typically, however, you can sand out the burn marks.

Is white oak a closed grain?

White Oak. A closed grain hardwood, white oak is almost impervious to water. The pores of the heartwood of white oaks are typically plugged with tyloses, which is a membranous growth. Tyloses makes the white oak impenetrable to liquids and particularly suited for use in the boat industry.

What is white oak used for?

Uses in woodworking. Unlike red oak, white oak resists moisture and decay, making it ideal for outdoor furniture and boats. Indoors, it's a cabinet-class wood for tables and chairs, floors and trim, and turnings. Basketmakers also rely on the green wood. But, due to its hardness, carvers aren't fond of it.

What is the difference between white oak and red oak?

Those of the white oak have a shallow cap with an inside that's satiny smooth. The red-oak acorn cap is hairy inside. The wood of white oak isn't white as the name implies. It's tan. And unlike the end grain of red oak, which displays large open pores, that of white oak shows a tightly closed formation.

How to tell if a white oak tree is red or white?

Trees more than 8' in diameter and over 150' tall have been recorded. Usually, the trees fall between a 3-4' diameter and an 80-100' height. You can easily identity white oak by its round-lobed leaves (red-oak leaves have sharply pointed lobes). In the absence of leaves, check for white oak's tell-tale light, ash-gray bark with its scaly plates. Or, look for acorns. Those of the white oak have a shallow cap with an inside that's satiny smooth. The red-oak acorn cap is hairy inside. The wood of white oak isn't white as the name implies. It's tan. And unlike the end grain of red oak, which displays large open pores, that of white oak shows a tightly closed formation. Weighing about 47 lbs. per cubic foot dry, white oak features a straight, coarse grain that when sawed on the quarter often produces a rippled figure.

How tall is a white oak tree?

Trees more than 8' in diameter and over 150' tall have been recorded. Usually, the trees fall between a 3-4' diameter and an 80-100' height. You can easily identity white oak by its round-lobed leaves (red-oak leaves have sharply pointed lobes).

How much does white oak cost?

Don't worry, all species share the same wood traits. Widely available at hardwood suppliers, white oak costs about $2 per board foot; triple that price for quarter-sawed wood.

What wood was used in the colonial era?

As New England sea captains went on to sail their all-American, white-oak ships to the far corners of the world, another growing industry also made far-reaching use of the wood. Ever since colonial times, coopers had hand-riven staves of white oak for barrels.

Why sharpen turning tools when working white oak?

Sharpen your turning tools more frequently when working white oak so that they never abrade the wood.

What is oak used for?

Oak is a very popular hardwood used in a variety of projects, ranging from flooring to furniture, cabinetry, crafting, joinery, paneling, and decking. Though the use of oak timber is common since pre-colonial times, the wood is equally great for building modern pieces of stylish furniture. Because of its high durability, hardness and great looks, it is a first choice timber for woodworkers around the world. In this article, you can find in detail about the basic oak wood properties, characteristics and uses.

What is the difference between red oak and white oak?

Since it has many varieties, the colors may also vary significantly. While white oak has a beige-brownish hue, red oak has a darker, rosy color. Sometimes, two pieces from the same tree can have different colors based on where it has been extracted from. The sapwood is usually lighter than the heartwood, but not always.

Why is oak so heavy?

However, oak is rather heavy because of its high density.

Is oak the strongest wood?

Based on hardness, it is considered one of the strongest woods. White oak has a Janka rating of 1,360 while red oak has 1,290 Janka hardness. The higher the Janka rating, the harder the wood is. In terms of hardness, oak is superior to even walnut and cherry. More hardness means the furniture and items last longer and are sturdier.

Is oak a hardwood?

There are over 60 varieties of Oak, each with its own distinct color and hue. Of all types of oak, red and white are the most popular. It is a hardwood since it comes from a dicot or leafy tree. Hardwoods are generally stronger/harder than softwoods, but that may not always be the case.

Is oak wood good for outdoor use?

Water resistance is another one of the major properties of oak wood, especially white oak which has decent resistance to water and damage because of its closed pores and higher Janka rating. The wood is quite durable and highly resistant to wear and tear insects, and fungal infestations. Oak wood furniture and construction have a fairly long life and will not go to landfill anytime soon, which also makes it eco-friendly. It can also be used as outdoor furniture because of its decent resistance to water and sunlight.

About White Oak

White Oak is naturally rot-resistant and strong. These qualities make it a good choice for outdoor use.

What is a Board Foot?

A board foot (bdft.) is a standard of measurement equal to one square foot that is one inch thick. This measurement is used to measure the volume of lumber.

What does S2S and S4S mean?

S2S means the lumber will be surfaced on two sides—it is planed smooth on the top and bottom face but not sanded. The edges are left rough.

Is the wood clear?

All our Lumber is Select and Better (Sel&Btr) grade unless otherwise specified. Select and Better is the highest grade available.

Kiln Dried

Our White Oak wood is kiln dried. Kiln drying is an effective way of drying green (freshly cut) lumber in a controlled environment to a specific moisture content. The resulting dried wood is stronger and more stable.

Why do people love white wood?

One of the main reasons people love whitewood is because it is so extremely versatile. It can easily be used to create something large, like an important piece of heirloom furniture. Alternatively, it can be used to craft something so delicate and small, like the handle of a knife blade.

What is Whitewood?

It seems that the definition of the word can vary based on the lum beryard they visit, the availability of specific types of wood, and even what part of the country they live in.

What is the difference between pine and whitewood?

This is the real difference between whitewood and pine as far as your lumberyard is concerned. Pine tends to be the more durable option for home building and flooring, making it the more expensive option. Whitewood is usually relegated to more common uses and has a smaller price tag.

What kind of wood is used for tulip trees?

Many home improvement centers and other locations will sell other types of softwood under this label. In fact, you may believe that you are purchasing whitewood lumber from the tulip tree, but you are actually receiving spruce, fir, pine, or some other type of coniferous wood.

Why is whitewood so versatile?

It could even be carved easily because of the inherent softness of the wood. The flexibility that you can encounter with whitewood is one of the primary reasons why woodworkers continue to flock to this type of wood. Not only is it extremely versatile, but it is also affordable.

How to determine if you are pricing whitewood or pine?

Another test you can use to determine whether you are pricing whitewood or pine is the weight test. If you have a piece of each side by side, whitewood should weigh less than an equal-sized piece of pine. Last but not least, you should consider the price tag.

How to tell if whitewood is real?

If you are looking at real whitewood, you will be able to identify it by its creamy white color. It is relatively soft and has a straight grain that makes it ideal for builders who need a precise cut for their project. Whitewood can easily be worked into any shape, which is why it tends to be so popular.

What Is White Oak Flooring?

White oak is a domestic hardwood, meaning it is grown in North America. The trees are found mostly on the eastern side of the country, from northern parts of Florida to southern regions of Canada. White oak is readily available as a flooring material and, as hardwood flooring pricing goes, is reasonably affordable—especially when compared to walnut, cherry, and popular imported options.

Where is white oak grown?

White oak is a domestic hardwood, meaning it is grown in North America. The trees are found mostly on the eastern side of the country, from northern parts of Florida to southern regions of Canada. White oak is readily available as a flooring material and, as hardwood flooring pricing goes, is reasonably affordable—especially when compared to walnut, cherry, and popular imported options.

What is the best layer of engineered hardwood?

When shopping for engineered hardwood, look for options with a thick wear layer. The thicker the hardwood layer, the more refinishing potential the flooring has. This translates to a longer lifespan for the floor.

How long does it take to acclimate wood flooring?

Acclimation is necessary for laminate and engineered varieties of white oak flooring, as well. Some engineered wood flooring options require as much as 7 days of acclimation.

How long does it take for wood to acclimate to its final destination?

While equilibrium occurs at different points according to wood species, environment, and a multitude of other factors, it is a good idea to let the wood acclimate to its final destination environment for at least three days. Acclimation is necessary for laminate and engineered varieties of white oak flooring, as well.

What are some alternatives to white oak flooring?

The most common "hardwood-like" alternatives are engineered and laminate, with the former being closest to the real thing.

Is hardwood flooring durable?

Hardwood floors have been wildly popular for centuries, and for good reason. They are extremely durable, accept many finishes readily, and, when properly cared for, can last for generations. Beyond sheer practicality, hardwood floors are also beautiful additions to both traditional and modern homes. Of all the hardwood varieties out there, white ...

What woods are good for outdoor projects?

When we think of woods for outdoor projects, especially when we think of furniture, teak and cedar come to mind quickly. They are beautiful woods, finish well, and last a long time.

Is white oak a gray or white wood?

The white oak is not actually white, although its bark is a light gray color. The name comes from the color of finished wood.

Is cedar good for outdoor furniture?

Cedar is also an excellent choice for outdoor furniture. It is an especially strong and durable wood that will not warp or sag. It’s less expensive than teak and lighter than other outdoor furniture wood choices. Some species of cedar are also resistant to insects and rot, two important considerations for outdoor furniture.

Can you use boiled linseed oil on wood?

In another post, we discussed the use of boiled linseed oil as an excellent sealant and clear finish because it penetrates deeply into the woods.

Is white oak waterproof?

Finishing white oak for outdoor use raises that “virtually impervious” nature as close to waterproof as something can be, though.

Is exterior paint used for outdoor use?

These exterior finish products are all regularly used in the treatment of woods for outdoor use. However, there is one more to consider, however blasphemous you might think it to be – exterior paint.

Does painting hide wood grain?

Painting will, of course, hide the grain of the wood, and perhaps you don’t want it hidden. But exterior paint is a good measure of protection for wood used in outdoor projects and seals the wood against the elements and nature.

image
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z 1 2 3 4 5 6 7 8 9