Full Answer
What is a 17mm socket in SAE?
What is a 17mm socket in inches? A 17mm socket is 11/16" in standard (SAE) size, almost. 11/16" converts into 17.4625mm so 11/16 is the closest standard socket that may fit your 17mm fastener. standard (SAE) sockets are measured in inches. What is a 13mm socket in SAE?
Can you use SAE sockets in a metric socket?
While you should have a full set of metric and SAE sockets to ensure your tools’ stability and longevity, there are a few instances when you can sub an SAE for a metric socket or vice versa. Below is a table of the commonly accepted changes you can make without worrying about damaging bolts or your sockets.
What size is a 22mm socket in inches?
A 22mm socket is 7/8" in standard (SAE) size, almost. 7/8" converts into 22.225mm so 7/8 is the closest standard socket that may fit your 22mm fastener. What is a 17mm socket in inches?
What does the socket conversion chart Tell Me?
This socket conversion chart tells you which standard (SAE) socket to use with your metric (mm) fasteners, it is not a measurement conversion chart. Tip: If your slightly over-sized socket doesn't fit you can try placing a thin piece of cloth over the bolt before pressing the socket into place.
What is 11 16 wrench to mm?
SAE to Metric Conversion ChartSAEMetricInch16mm0.6321/32"0.65617mm0.66911/16"0.68847 more rows•Apr 29, 2020
What is a 39mm socket in standard?
Standard / Metric Wrench Conversion ChartBolt DiameterStandardMetric1-3/8"35mm1"1-1/2"38 mm1-5/8"41mm1-1/8"1-11/16"43mm39 more rows•Aug 26, 2019
What is a 1 inch socket in metric?
1 inch = 25.4 mm.
What is a 3/8 socket in MM?
That's the formula that our calculator uses to find that 3/8 inch to millimeters is 9.525 mm.
What are socket sizes in order?
There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters). In-between sizes are available too, starting with 1/4 inch (0.6 centimeters) and increasing every sixteenth of an inch (0.16 centimeters).
What is 30mm in standard?
Wrench Size And Conversion TableInchesMillimetersSpanner1.18130mm30mm1.20011/16 Wworth; 3/4 BSF1.2501 1/4 AF1.26032mm32mm65 more rows
How many MM is a 1 16?
1.57 mmConversion table inches to mmDimensions — Inches to Metric0.062”1/16”1.57 mm0.125”1/8”3.18 mm0.188”3/16”4.78 mm0.250”1/4”6.35 mm21 more rows
Are metric and imperial sockets the same?
Metric sockets use imperial-sized drivers and the drive dimensions follow in US sizes, such as 1/4″, 3/8″, 1/2″, ¾. This means you can use the sockets whether it's metric or SAE. Logically, smaller sockets would use smaller drive sizes, and larger sockets use larger drive sizes.
What are the imperial socket sizes?
The standard Imperial sizes of square drives includes 1/4″, 3/8″, 1/2″, 3/4″, 1″, 1-1/2“, 2-1/2“, & 3-1/2“. Though there are a few other less common sizes, 1/4” is ultimately the smallest. Thus, the smallest socket sizes are only available in this drive size.
Are 3/8 and 10mm the same?
10mm = just over 3/8 inch. 11mm = almost 7/16 inch. 12mm = almost 15/32 inch (= almost 1/2 inch) 13mm = just over 1/2 inch.
What is a 1 1 8 socket to MM?
Metric / Standard Wrench Conversion ChartBolt DiameterMetricStandard25mm1"3/4"29mm1-1/8"32mm1-1/4"7/8"34mm1-5/16"39 more rows•Apr 9, 2020
What wrench do I use for a 3/8 bolt?
US Bolt Head/Wrench Size TableBolt DiameterHead/Wrench Size3/89/16-7/165/8-1/23/47/89/1613/16-13 more rows
What size is a 3/4 socket in MM?
Metric / Standard Wrench Conversion ChartBolt DiameterMetricStandard7/16"16mm5/8"1/2"19mm3/4"9/16"21mm13/16"22mm7/8"39 more rows•Apr 9, 2020
What size is a 35mm socket in standard?
3/4" Drive 12 Point Standard Metric Socket 35mm.
What are the SAE socket sizes?
Common SAE socket sizes5/16″3/8″7/16″1/2″9/16″5/8″11/16″3/4″More items...
Are 3/4 and 19mm the same?
19mm = 3/4 inch. 20mm = 25/32 inch. 21mm = just over 13/16 inch. 22mm = almost 7/8 inch.
How many sockets does a hammer wrench have?
These wrenches have one pivoting socket end and one open end.
How many volts are in a socket?
Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1, 000 volts to meet IEC 60900.
What is a flare nut socket?
The opening shape makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with fla red tube fittings and fuel and hydraulic lines.
How to access fasteners from an angle?
Pivot the head to access fasteners from an angle.
What are OSHA sockets made of?
Made of aluminum- bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
What is the best grip on square fasteners?
The square shape provides the best possible grip on square fasteners and prevents rounding.
What is extra length on bolts?
Extra length allows access to fasteners on long bolts.
Why is a 6 point socket better than a 12 point socket?from yardandgardenguru.com
It is thought a six-point socket will be more durable than a 12-point because its inner walls are set against all six sides of the hardware.
What are the different sizes of sockets?from homearise.com
Sockets follow two different sizes. There are SAE-sized sockets and metric sockets. The sizes are often used interchangeably. Knowing about both is important if you need to use your sockets regularly.
Why Do You Need Socket Sets?from homearise.com
Sockets are generally used to tighten or loosen different fasteners. They can be an alternative to the conventional wrench if you know their usage. Most DIY enthusiasts and mechanics prefer having a set handy.
What is the drive on a socket wrench?from yardandgardenguru.com
The drive on your socket wrench is the square section sitting on the ratchet. Certain sizes accept a varying number of sockets that can be either metric and SAE.
Why do you need multiple sockets?from homearise.com
One of the main benefits of having a socket set is versatility. If you’re dealing with a tight fastener, having multiple sockets can be beneficial. Also, it provides better grip when compared to wrenches.
Why are point sockets so expensive?from homearise.com
Point sockets are slightly more expensive than regular ones. Mostly due to the fact that they’re available in a lot of sizes together. If you’re planning to spend, point sockets are a good idea.
How many types of sockets are there?from homearise.com
Now that we’ve discussed the types of socket drives, let’s discuss the types of sockets. There are two common types of sockets available. The use of sockets has changed a lot over the years.
What are the different sizes of sockets?
Sockets follow two different sizes. There are SAE-sized sockets and metric sockets. The sizes are often used interchangeably. Knowing about both is important if you need to use your sockets regularly.
What is the most common socket?
If you’re new to using sockets, point sockets are the way to go. The most common point socket is the 12-point socket. The biggest benefit of the 12-point socket is that it’s easy to use. Simply slip the socket over any of the 12 positions and you’re set.
Why Do You Need Socket Sets?
Sockets are generally used to tighten or loosen different fasteners. They can be an alternative to the conventional wrench if you know their usage. Most DIY enthusiasts and mechanics prefer having a set handy.
Why do you need multiple sockets?
One of the main benefits of having a socket set is versatility. If you’re dealing with a tight fastener, having multiple sockets can be beneficial. Also, it provides better grip when compared to wrenches.
Why are point sockets so expensive?
Point sockets are slightly more expensive than regular ones. Mostly due to the fact that they’re available in a lot of sizes together. If you’re planning to spend, point sockets are a good idea.
How many types of sockets are there?
Now that we’ve discussed the types of socket drives, let’s discuss the types of sockets. There are two common types of sockets available. The use of sockets has changed a lot over the years.
What is the drive on a socket?
The drive is the main part of the socket. It is the hole where the socket is attached to a turning tool. Like a wrench or a ratchet. The type of drive depends on the task at hand.
What is a 12 point socket?
The 12 -point shape quickly positions on hex fasteners. These sockets are made to withstand the high torque and force of impact tools.
What size sockets need a retainer?
3/4", 1", and 1 1/2" square drive size sockets require a locking retainer. Use with an impact wrench that has a pin-style socket retainer, or use a socket retaining ring with tools that have a hole- or hole-and-ring style socket retainer.
What is a flare nut socket?
The opening makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.
What is a crowfoot wrench?
Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.
