What personal protection equipment should be worn when using the belt/disc sander? Safety glasses, dust mask, hearing protection and gloves. Safety glasses, dust mask, and gloves.
How to use a belt/disc sander safely?
B. Belt/Disc Sander Safety 1. Wear safety glasses at all times when operating the belt/disc sander. 2. Wear a dust mask or respirator when using the belt/disc sander for prolonged periods of time. 3. Keep the sanding disc well glued to the disc plate at all times.
Do you have to wear gloves when using a disc sander?
DISC SANDER DO NOT use this machine unless you have been instructed in its safe use and operation and have been given permission PERSONAL PROTECTIVE EQUIPMENT Safety glasses must be worn at all times in work areas. Long and loose hair must be contained. Gloves must not be worn.
What precautions should be taken when using a disk sander?
Wear safety glasses or goggles, or a face shield (with safety glasses or goggles). Wear a dust respirator for dusty operations. Make sure the sander is switched "OFF" before connecting the power supply. Click to see full answer. Besides, when you are using a disk sander you should?
What should you not do with a power sander?
DON’T Do not use faulty equipment. Immediately report suspect equipment. Do not sand very small items. Do not sharpen tools with the sander. Do not sand metal. Never leave the machine running unattended. This SWP does not necessarily cover all possible hazards associated with this equipment and should be used in conjunction with other references.
What personal protective equipment should be worn when using the belt sander quizlet?
What personal protection equipment should be worn when using the belt/disc sander? Safety glasses, dusk mask, and hearing protection.
What are safety precautions that need to be applied when using the disk sander?
Safety Rules for the Disc SanderAlways wear proper eye and ear protection, and a dust mask. ... Turn on the MARK 7/MARK V, let the disc get up to speed, then feed the workpiece. ... Never reach over the disc or behind it while it's running.Always sand on the downward motion side of the disc ( Figure 17-3).More items...
Which personal protective equipment should be worn by the operator when using the random orbital sander?
Wear a respirator or good quality dust mask when using the random orbit disk sander. 4. Never allow the rotating sanding disk to touch the electrical cord or any part of the body. Electrical shock or a serious cut may result.
What precautions should be taken when using a disk belt sander quizlet?
Wear safety glasses at all times when operating the belt/disc sander. Only use a belt/disc sander in a well ventilated area. Turn on the exhaust fan. Loose clothing, long hair or long jewelry can get caught in a belt/disc sander when it is moving.
What are the 3 most important sander safety rules?
Safety Rules Don't wear loose clothing or gloves, keep long hair tied back. Never adjust Sander or setup while Sander is running. Never remove guard unless authorized by Technician or WRL Manager • Setups requiring anything other than the standard sander equipment must be approved by supervisor.
Should you wear gloves when using a belt sander?
NEVER wear gloves or hold the work with a rag when sanding. SAND with the grain of the wood. DO NOT sand pieces of material that are too small to be safely supported. AVOID awkward hand positions where a sudden slip could cause a hand to move into the sanding belt or disc.
When using a bench belt sander proper operation includes?
0:573:06Disc and Belt Sander Operation & Safety - Clark Magnet High School ...YouTubeStart of suggested clipEnd of suggested clipBe firmly with the workpiece pushing toward your hands see firmly with the workpiece pulling awayMoreBe firmly with the workpiece pushing toward your hands see firmly with the workpiece pulling away from your hands d close to the sander for better control.
What are the hazards of a belt sander?
The work piece can become jammed in the sanding machine.Hand or clothing, which can become entangled with moving parts.Wood dust, which can be inhaled, affects the respiratory system.Inadvertent starting of the machine can lead to accidental contact.The abrasive belt can break up and lash out.More items...
What is a belt sander when should it be used?
Belt sanders are multiuse tools. They are commonly used for trimming to a scribed line (photo), sanding very rough surfaces, leveling surfaces (like a replacement board in a hardwood floor) and freehand rounding and shaping.
How should the belt sander be placed when setting it down after sanding?
6. When finished sanding lift the belt sander off the material and then release the Off/On switch. 7. Lay the belt sander on its side when setting the tool down.
When using power tools one should be aware of the actions of others in the work area?
When using power tools, one should be aware of the actions of others in the work area. As a general rule, the use of a blade with more teeth results in a smoother cut. Which best describes the variable-speed-trigger feature? Sawdust in between the teeth of the blade can keep the blade from working effectively.
What requirements are necessary to protect an electric tool user from shock quizlet?
When using electric tools to protect yourself from shock, you must have a three-wire cord with a ground prong or be double insulated. Grounded tools provide better shock protection than double insulated tools.
What to wear when using a belt sander?
Wear Impact-Resistant Eyewear. Don't forget to wear impact-resistant eyewear when using a belt sander. This is arguably the single most important piece of personal protective equipment (PPE) for using a belt sander. With its high-power motor, the sander can literally shoot chunks of wood into the air.
What is a belt sander?
Safety Tips to Follow When Using a Belt Sander. A belt sander is a power tool used to shape and finish wood and wooden objects. It features an electric motor that, once engaged, turns a two drums on which a piece of sandpaper is attached. There are dozens of different types of belt sanders, though most work in this same manner.
Do you need impact resistant eyewear for belt sander?
Don't forget to wear impact-resistant eyewear when using a belt sander. This is arguably the single most important piece of personal protective equipment (PPE) for using a belt sander. With its high-power motor, the sander can literally shoot chunks of wood into the air. Without the appropriate impact-resistant eyewear, this could result in serious eye injury or even vision loss. Problems such as these are easily avoided, however, by equipping yourself with the right PPE, including eyewear.
What is Sanding Equipment Used For?
Sanding equipment is typically used to prepare the surface of numerous materials for finishing. Although generally associated with removing the top layer (s) off wood to prepare it for staining, varnishing, or paint, commercial sanders are routinely used to refine other materials.
What is a Disc Sander?
As the name implies, disc sanders usually involve a circular plate that spins to create friction when coming into contact with materials. The abrasive discs sometimes mirror those of circular saw blades and can be mounted to many different power tools. Some equipment is specifically designed for these hard sanding pads.
What is a Belt Sander?
The most significant difference between a disc sander and a belt sander involves the application. Unlike disc sanders that rotate in a circular fashion, belt sanders mimic conveyors. The sandpaper is clasped into handheld devices or large fixed equipment that causes a drum to spin at high rates.
What Industries Commonly Use Sanding Equipment?
From a health and safety perspective, it’s important to understand that even infrequent use of a belt or disc sanders creates hazardous dust particles. These sometimes difficult-to-see elements can enter the lungs, eyes, ears, or affect the skin.
Belt and Disc Sander Hazards and Precautions
Belt and disc sanders present significant workplace dangers. Employees should be trained in proper safety techniques and the use of necessary PPE and disposable clothing. Failures to follow safety protocols such as the following can result in injury.
What PPE is Required for Sanding Equipment?
Sanders create a dual threat for hard-working people. They possess sharp edges, fast-moving parts, and send hazardous particles into the air. Construction materials such as pressure-treated wood are often laced with chromated arsenicals (pesticides) such as creosote and the biocide pentachlorophenol, among others.