by Mazie Hamill
Published 3 years ago
Updated 2 years ago
There are two standard thicknesses of plasterboard – 9.5 mm and 12.5 mm. The plasterboard sizes for ceilings are 9.5mm or 10mm. People assume that they must use thicker plaster, but that is actually not true. Thicker plasterboard will stick harder to the ceiling and will be difficult to seal joints if needed.Dec 21, 2018
What plasterboard is best for ceilings?
Best types of plasterboards for ceilings For a standard domestic ceiling, water resistant plasterboard is recommended. Lightweight acoustic plasterboard is recommended for ceilings with light construction or wooden joists and sound insulation properties of the ceiling are not deemed important.
How thick should plasterboard be for a ceiling?
How to Determine the Proper Plasterboard Thickness. To begin with, there are two standard plasterboard thicknesses and each of these will depend upon the intended application: 12.5mm plasterboard used for walls. 9.5 mm plasterboard is more appropriate for ceilings.
What board do you use for ceilings?
Ceiling materials commonly used are wood and inflammable synthetic materials such as gypsum board and fiber cement board.
Can you use 9.5 mm plasterboard for ceiling?
Standard plasterboard thicknesses for ceilings are usually 9.5 mm to 12.5 mm, while walls can be 12.5 mm to 15 mm.
Can you use 12.5 mm plasterboard on ceilings?
The most common plasterboard thickness is 9.5mm and 12.5mm. For ceilings is used 9.5mm thick plasterboard and for walls – 12.5mm.
Can you use 10mm plasterboard on ceilings?
You can use 10mm plaster board if the board spans no more than 450mm between battens. You can stretch this out to 600mm by either using a 10mm ceiling board specially made for the application or 13mm board.
What is the most common material used for ceiling?
drywallA variety of materials is used for constructing ceilings in a home. By far the most common today is the same as that used for walls—drywall (also known as gypsum wallboard or by the trade name Sheetrock). Drywall is attached to a structure of ceiling joists with drywall screws or nails.
What is the most common material used for ceiling lining?
plasterboardThe most common lining for ceilings is plasterboard.
What is the best materials to use for ceiling?
New options in ceiling materials like PVC can create a unique look on a small budget, but many of the classic materials remain favorites.Plaster of Paris. ... Wood. ... Metal. ... Fiberglass. ... Mineral Fiber. ... PVC. ... Glass. ... Cloth. A formal room is a suitable place for a draped cloth ceiling.More items...•
What is 12.5 mm plasterboard used for?
12.5mm Plasterboard - Wallboard Knauf Knauf Wallboard is plasterboard with an ivory paper face ideally suited to receive a plaster finish or for direct decoration. Typically used for: Partitions. Linings.
Where can you use 9.5 mm plasterboard?
Gyproc WallBoard 9.5mm is a basic plasterboard in 9.5mm thickness. Use it in a single layer for most wall and ceiling applications where minimal levels of fire, structural and acoustic performance are specified, or in multiple layers for higher performance.
What is blue plasterboard used for?
It is normally used in walls, ceilings and drywall partitions. The board itself consists of a layer of gypsum embedded between two pieces of paper. Known for its versatility and durability, this board can be painted or covered with other materials such as a multi finish plaster.
What is 9.5 mm plasterboard used for?
Gyproc WallBoard 9.5mm is a basic plasterboard in 9.5mm thickness. Use it in a single layer for most wall and ceiling applications where minimal levels of fire, structural and acoustic performance are specified, or in multiple layers for higher performance.
Can you use 1/2 inch drywall ceiling?
Use 1/2-inch thick green board on ceilings with joists spaced 12 inches apart or fewer and 5/8-inch drywall on ceilings with joists up to 16 inches apart. Use a waterproof wall material over green board in moisture-prone areas.
How thick should a ceiling be?
The correct thickness for ceiling drywall is ½ inch (12.7mm). ½ inch-thick drywall panels are recommended because they are easy to carry and hang on ceiling rafters during installation. You can also use the much lighter half-inch boards that weigh 54.4lbs as they are more suited for ceilings.
How thick should plaster be on plasterboard?
You should aim for a thickness of around 1–2mm. The plaster you have mixed should last around 40 minutes before starting to set.
25 hours ago
A premium, lightweight 10mm thick plasterboard used as a general internal wall and ceiling lining in residential applications. Optimised Core technology provides significantly improved handling and board performance. Supaceil™ A plasterboard with Optimised Core Technology for ceilings in residential applications . Aquachek™ The perfect moisture resistant plasterboard for …
29 hours ago
GIB® Plasterboard Ceilings. GIB® plasterboard ceilings are used in our homes and places where we like a clean smooth finish. These can be direct fixed to timber or metal battens or suspended from the structure above. Although they are the most popular choice for ceilings in homes in New zealand there are also many other options.
22 hours ago
Whatever plasterboard you need, we’ve got it in stock. Available in a range of sizes suitable for any project, we’ve got plenty of plasterboard sheets to pick-up in-store or online. Whether you need standard plasterboard or plasterboard sheets with a specific built-in property, we are fully stocked up to help you get on with your latest ...
3 hours ago
Whilst perforated plasterboard in predominantly installed in ceilings, it is suitable for use in walls. The unique installation method allows the product’s perforated pattern to continue uninterrupted, achieved using a specialised compound, accessory kit and primer prior, readying the surface for sanding and painting.
14 hours ago
SHEETROCK is a trademark owned by United States Gypsum Company and used under license. Knauf Gypsum Pty Ltd (ABN 84 004 231 976) 3 Thackeray St, Camellia NSW 2142. Knauf Gypsum Pty Ltd (ABN 84 004 231 976) 3 Thackeray St, Camellia NSW 2142.
22 hours ago
Studco Concealed Ceiling Systems can be used for non-fire-rated or fire-rated applications and have been designed to meet the relevant Australian standards. Need engineering advice? Talk to the Studco Technical Team today on 1300 255 255.
11 hours ago
Gyprock Plus 10mm plasterboard is used as an internal lining in non wet areas, primarily in residential building applications. Featuring Optimised Core technology as well as a stronger, thicker face paper, it delivers an advanced performance-to-weight ratio, meaning greater breaking strength in a substantially lighter board that continues to exceed the performance requirements …
1 hours ago
Gyprock Fyrchek™ is a fire and acoustic grade plasterboard with a specially processed glass fibre-reinforced gypsum core for use in fire rated wall and ceiling systems and where improved acoustic performance is required. Fyrchek is available in in 13mm and 16mm thickness in 1200mm wide sheets. The long edges are recessed for flush jointing.
23 hours ago
· Plasterboard is basically used to line ceilings and walls, but it has many functions - some types are fire-resistant, some are soundproof, some are moisture- and mould-resistant.
24 hours ago
· Applied plaster ceilings are used to plaster the slabs through a mixture of reinforced lime or gypsum while those made of gypsum rock slabs are industrialised systems that are used suspended and ...
