what should i look for when buying a metal roof

Top Six Things To Look For In A Metal Roof

1. Kynar 500® or Hylar 5000® PVDF resin-based finishes. Available in many colors and even multi-hued shades, these coatings offer the best combination of durability and fade resistance. ...
2. “Self-Cleaning” Valleys. Although you may not often think about it, a lot of debris ends up on your roof. ...
3. Premium Certified Products. ...
4. Special Flashings. ...
5. Warranties. ...
6. Ventilation. ...

Full Answer

What is the best finish for a metal roof?

Not all metal roofs offer these features, but we think you will agree they are very important. Kynar 500® or Hylar 5000® PVDF resin-based finishes. Available in many colors and even multi-hued shades, these coatings offer the best combination of durability and fade resistance.

Is a metal roof right for You?

If installed correctly, some metal roofs can sustain wind gusts up to 140 miles per hour, will not corrode or crack and may be impact-resistant (depending on which product you choose). In addition, metal roofs don't need the periodic costly maintenance that other roofing materials often require.

How do I know if my metal roofing is safe?

Make sure your metal roofing product is tested, labeled and listed with a testing organization such as UL, FM Approvals or Intertek to meet rigorous wind, fire and impact resistance rating requirements.

How much does a metal roof cost to install?

The many years of service that a metal roof promises come at a high cost. This material can run from $120 to $900 per 100 square feet (or one “square” of material), according to Home Advisor’s Guide to Roofing Costs.

How to contact Classic Metal Roof?

Feel free to email your questions to us at [email protected], or give us a call at 1-800-543-8938.

What is the debris that ends up on a metal roof?

Although you may not often think about it, a lot of debris ends up on your roof. As things like tree leaves, pine needles, seed pods, ice, and snow travel down your roof, they end up in any valleys your roof may have. Many metal roofs have “closed” valley systems with hidden waterways to channel water off of the roof.

What is a closed valley on a metal roof?

Many metal roofs have “closed” valley systems with hidden waterways to channel water off of the roof. These hidden waterways, however, will clog up with debris and then the water path is blocked and bad things (leaks!) happen. “Self-Cleaning” valleys carry the water and debris on top of the roof and can’t clog. Premium Certified Products.

Can you use sealant on metal roof?

Many roofs have areas which require special care. With metal roofing, you can’t just depend upon sealants in those areas like is often done with temporary roofing materials. If your roof has dead valleys, skylights, chimneys, flared gables, or other unusual things, make sure that you understand exactly how these will be handled by your contractor.

How much does a metal roof cost?

At the low end, metal roof shingles start at $6.5 per square foot, which is only 30% more expensive than popular architectural shingles.

How much does it cost to install a metal roof?

On average, a new roof made of metal costs $8,500-13,000 to install on a 1,600 sq.ft. home. The prices range depends on the type of metal and profile you choose. Standing seam is the most expensive, followed by stone coated steel tile, and metal shingles.

What is a standing seam roof?

A standing seam roof is a great fit for contemporary architecture. However, it can also enhance the curb appeal of Colonial, Ranch and Log Cabin homes. This profile is ideal for the snow country, as it is designed to protect against ice dams. Another great benefit of a standing seam system is that its ideal for homeowners who want to install solar panels on their roof.

What is the best material for a Spanish style roof?

Metal tile. Metal tiles are considered to be an upscale material and are more expensive than classic metal shingles. These are a perfect choice for Spanish/Mediterranean style houses, where installing a natural clay tile roof is not appropriate. Metal tiles can either be painted or made from stone coated steel.

How much does a stone coated roof cost?

Stone coated metal shingles and tiles are the second most expensive metal roof, after standing seam. Prices range from $8 to 10 per square foot , including materials and installation. However, its important to realize that it terms of durability and weather protection, stone coated tiles offer no real advantage over painted metal shingles.

How long do asphalt shingles last?

By contrast, when you put up asphalt shingles, you can expect them to last 12-20 years at best. This means that you will be replacing this roof 2-4 times over the same 40-60 year period. Consequently, you will end up spending at least double the amount, and probably more than it would have cost you to initially install a metal roof.

Why do people put metal roofs on?

In fact, the majority of homeowners who end up installing a metal roof, do so largely because of the level of protection it affords when bad weather strikes.