What Type of Material to Use for Fascia Board?
- Wood Is a Common Fascia Material. It makes sense to use wood for the fascia if your house has wood siding, but it's also a common material on houses with ...
- PVC as a Fascia Material. A PVC fascia board is constructed to look like wood, even though it's made from the same material as plumbing pipes.
- Fiber-Cement and Composite Fascia Boards. If your house has fiber-cement siding, you'll probably want to trim it out with fiber-cement fascia boards.
- Vinyl and Aluminum Fascia Covers. If your house has vinyl or aluminum siding, you want the fascia to match. It's possible to buy vinyl fascia boards, but not aluminum ones.
- Choosing Soffit Material. The underside of the roof between the fascia and the wall is known as the soffit or eave, and it's common to cover this to keep out ...
Why do we use fascia board daily?
- More accurately defined as polyvinyl chloride (PVC)
- Standard PVC includes plasticizers for added flexibility
- Fastened to wood fascia to add appeal and increase lifespan
What type of wood is best for fascia?
- Choose the best wood. Handpick each wood fascia board and make sure it's from a species of wood that's naturally decay resistant.
- Watch where you nail your fascia. If at all possible, never nail a fascia board near the edge of the end grain.
- Use the best nails.
- Paint the ends of your fascia boards.
How to replace a fascia board?
How to Replace the Fascia Board Step 1: Start by removing the gutter and any extra roof shingles that may be covering the fascia board. This is easiest if you decide to erect a scaffold but a ladder will work just as well. Step 2: Use a circular saw that is set to a 45 degree angle to cut off the damaged fascia board that is present. This may ...
Which nails to use on facia boards?
- Make sure your hands aren’t in the path of the saw while you’re cutting so you don’t seriously injure yourself.
- Some hardware stores offer miter saw rentals so you can use one without purchasing it.
- You don’t need to miter the ends of the boards if you don’t want to, but the corners won’t look as clean.
What wood do you use for fascia boards?
Many different types of wood are suitable for fascia boards. Spruce, pine and fir are all popular and relatively inexpensive options. However, some roofers prefer to use cedar, cypress or redwood for fascia boards. While they are more expensive, these woods better resist moisture, even when left unsealed.
Should I use treated lumber for fascia board?
Purchase the right size lumber to replace your fascia boards. Purchase pressure-treated lumber to replace your fascia boards as a way to extend the life of the repair. Pressure-treated lumber is designed for outside applications and resists rot, moisture and insect damage.
How thick should fascia boards be?
1" thickFascia is the term given to the horizontal board that is fixed along the rafter ends at the eaves, closing the gap between each rafter. Traditionally made of 3/4" or 1" thick timber, PVC has in recent years become the material of choice for most contractors and developers due to its maintenance-free appeal.
What size lumber is used for fascia?
Fascias are typically made from 1-inch material, with the width being enough to cover the rafter width. Typically rafters will range from 2×6 to 2×8, although some are larger depending on the roof construction. Therefore, the more common fascia board sizes are 1×6 or 1×8.
Can you use pine for fascia board?
Wood Is a Common Fascia Material That's because both of these wood species have some natural rot-resistance, even when unpainted. If you prime and paint the fascia, you can also make them out of fir, spruce or pine, which are all less expensive. You construct fascia boards out of 1-by lumber.
Is Yellow pine Good for fascia?
Southern Yellow Pine Although treated with very toxic chemicals, pressure-treated pine makes for a durable fascia board that will not rot easily.
Can I use 2x4 for fascia board?
Install 22-1/2" long 2x4s between the trusses to support the fascia boards where they butt. See detail below.
What kind of wood do you use for soffit and fascia?
Common Fascia and Soffit Materials Fiber-cement fascia board with wood grain. Standard soffit material is 3/8- or 1/2-inch-thick exterior plywood in pine (or similar softwoods) or cedar. Common, but much less durable, is Masonite or similar fiberboard soffit, as well as much more weather-resistant fiber-cement.
What types of material are fascia boards typically made from?
Fascia boards are made from structurally strong wood, which helps give support to the gutter, as well as to the soffit, which is installed just behind it. The fascia supports these sections of the home, and gives the gutter and gutter tiles something to attach onto.
Can you use Hardie board for fascia?
HardieTrimboards can be fastened directly over a 2x sub-fascia or directly to rather tails.
What material is used for the soffit and fascia?
While soffits and fascia are traditionally constructed from materials like aluminum and wood, many homeowners are now choosing ones made from synthetic and composite materials like UPVC and vinyl because they offer easy maintenance and durability.
Is fascia a 1x6?
Fascia Board Sizes #1 - 1x6 This boards nominal size is five and a half by three quarters. This is the most common fascia board you will find.
What is fascia board?
You are not alone when I say it is acceptable to be utterly oblivious to what fascia boards are! It may not look like much, but a fascia board is an essential component of your home’s plumbing and gutter system. A fascia board is a thin longboard that runs along the lower outer edge of your roof and covers the entire roofline. Why are they so important? Fascia Boards are what holds your home’s gutter system in place. With this general knowledge, continue reading for a detailed guide on fascia boards and keep yourself updated as homeowners on the best materials and solve specific problems that can arise with fascia boards. Plumbing and sewage issues can be a nightmare for almost anyone, so stay with us as we cover Everything you need to know!
How much does it cost to replace a fascia board?
replacing your fascia board can cost around $15 to $25 a linear foot installed. Prices for the replacement can depend on several factors, including the material used and your home’s size. It can cost up to $5,000 or more to repair damaged or rotted fascia.
What is fascia board made of?
Like many siding and trim products, fascia boards can be made from several different materials with different textures. In many instances, it will be matched to the soffit and trim used elsewhere on the home. So if these materials are made of wood, the fascia board should be also, to help give the most cohesive appearance to the property.
Why is fascia board important?
Fascia boards are important to both the looks and the function of the home. Make sure that you’re using the right type of fascia board to help your home look its best. Contact Belco Forest Products to speak with an expert on fascia boards today.
What is the best alternative to wood fascia?
One good alternative to these materials is to use preservative-treated wood as the fascia board and trim. Preservative-treated and primed Belco XT Trim products help resist issues that lead to wood rot. This preservative treated and primed wood fascia trim can stay protected and looking its best for greater lengths of time.
Why is fascia board thicker than gutter trim?
The fascia board needs strength to carry the weight of not only the soffit. But also needs to be able to support the weight of the gutters when they’re filled with rain. That is why this trim is generally a little larger or thicker than the trim used elsewhere on the home.
Why does my gutter fascia crack?
The weight of the weight of water filled gutters will cause the fascia to warp. Very cold climates can cause the material to become brittle. Which means fascia to crack, and the ultimate failure of the area. One good alternative to these materials is to use preservative-treated wood as the fascia board and trim.
What is drip edge trim?
The drip edge board serves the purpose of preventing moisture traveling from the edge of the roofing material under the fascia boards causing conditions for rot to occur. The drip edge trim moves rain water from the roof edges to the face of the drip edge material and onto the face of the fascia.
What is fascia trim?
Fascia is a specific type of trim, which is installed just below the roof line. It helps to cover the soffit, and provides a more finished appearance for the roof and eaves of the home. These boards may vary in width, but is generally a slightly wider or thicker version of the same trim used on the rest of the home.
What is the best material for fascia boards?
Wood fascia boards are the most common of all fascia board materials because they are cost-effective to buy and install. They could be anything from fir, pine, or spruce. Wood is susceptible to rot when exposed to water. But there is a solution to this through finishing and regular painting. Most homeowners also agree that wood is versatile as a decorative material for fascias than any other material on our list. Cedar fascia boards have recently become an attractive choice for homeowners looking for rustic appearances, and the fact that it’s water-resistant is a big plus. They become even more durable when stained.
What are the disadvantages of replacing wood fascia boards?
The biggest disadvantage with wood fascias is the continuous maintenance and repair costs. You have to periodically prime and paint the boards to keep them in top shape. Replacing fascia boards is an urgent exercise immediately you sport damages and includes removing gutters as well, which increases the costs.
What is composite fascia?
Composite is a combination of several materials including plastic, wood chips, and dust held together using epoxy resin. These boards are cut and installed just like wood boards. But they are resistant to rot and very durable compared to other solutions. And all along, they require minimal maintenance.
Is cedar fascia wood durable?
Cedar fascia boards have recently become an attractive choice for homeowners looking for rustic appearances, and the fact that it’s water-resistant is a big plus. They become even more durable when stained. The biggest disadvantage with wood fascias is the continuous maintenance and repair costs.
Can you spray vinyl fascia boards?
While they can discolor when exposed to sun rays, vinyl boards only require spraying and wiping down to get them back to shape. You can get vinyl in any color you choose. Most importantly, vinyl fascia boards come in kits ready to install – and they are readily available in local stores.
Is aluminum a good material for fascia boards?
If you are looking for an upgrade from the common wood fascia boards, then aluminum is the next solution. The biggest positive about this material is its longevity. They are resistant to water and responds well to weather variations. They are often used alongside wood fascias to weatherproof them.
Is aluminum fascia easy to install?
Aluminum fascia boards are very easy to install thanks to their easy-to-cut and lightweight nature. Unlike wood, they are also maintenance-free. When it comes to aesthetics, you can get them in a wide range of colors to suit the theme of any home. If you are able, buy thicker aluminum to avoid easy denting.
Where can I buy fascia boards?
You can buy boards for your fascia from a hardware or home improvement store. Woods made from pine, spruce, or cedar all work well for fascia board. You may not be able to buy boards that are the exact length of your roof. If not, then get as many boards as you need to match the length.
How do I put fascia boards on my house?
If you need to put fascia boards on your home, there are easy ways to ensure that they fit correctly and are installed properly. Once you measure your roof to determine what length you need, cut the boards to the correct size. After that, secure the boards to the ends of your rafters to fit them in place.
How do I install drip edge on a roof?
Place the drip edge on top of your rafter so the end extends over the top of the fascia board. Drive 2–3 nails along the top of the drip edge to secure it to the rafters underneath. Work across the length of your roof to install drip edges along the entire length.
How many feet of fascia board should I cut?
For example, if you need 24 feet (7.3 m) of fascia board, you can cut 2 boards that are 12 feet (3.7 m) each or 3 boards that are 8 feet (2.4 m) each.
How to nail fascia board into rafters?
Have your helper support the board so you’re able to nail the end into the rafter. Use carpentry nails that are at least 2–3 inches (5.1–7.6 cm) long so the board stays firmly in place.
How thick should rafters be?
Look for boards that are treated for outdoor use since they’ll be more moisture-resistant and prevent rot from developing. Choose boards that are 1 inch (2.5 cm) thi ck so they fit easily onto the ends of your rafters.
How to cut a board with a circular saw?
Cut the boards to length you need using a circular saw. Lay the board you’re cutting on top of 2 saw horses so the side your cutting hangs over the edge. Mark the line on your board so you know where to make your cut. Put on safety glasses before turning on the saw and pushing it through the board.
Why do I need new fascia boards?
In the event you need new fascia boards, sometimes it can be because they’re simply old, wood (wood warps and rots over time) or because your gutters caused damage over time ( gutter guards help prevent this).
What is fascia board?
Fascia Boards: the longboard that encloses the roofs trusses on the edges of a home below the roof, where the gutters mount to. In the above photo, the fascia boards pictured are wood. However, fascia boards can come in a variety of materials including: Wood. PVC.
Why do fascia boards rot?
Because simply put, wood fascia boards rot quicker than the others when exposed to elements such as overflowing gutters: In the photo above, over time the rain gutters began to pull away from the home due to improper maintenance.
What is the relationship between fascia boards and gutters?
The fascia board also happens to be where gutters are mounted to. So to say the relationship between your home’s fascia boards and your gutters is important would be an understatement. Without fascia boards, your gutters would have nothing to mount to.
What is fascia board?
In a nutshell, a fascia board serves the following purposes: 1 It is the best means to secure and add a layer of stabilization for the gutter system. 2 Closing off access to the underside of the roof, it protects against insects and critters like squirrels, birds, etc. 3 It helps to block water from getting into the roof deck and entering the attic through the house eaves. 4 A well-designed fascia board helps to add curb appeal since it covers all the rough ends of the rafters and provides a more aesthetic backing for the gutters.
Where are fascia boards located?
Facia boards are located around the lower non-gable edges of your home’s roof. They are used to cover the ends of house eaves and the rafters that would be otherwise exposed between the roof and the soffits. An integral part of your home’s roof system, they provide an extra layer of protection against water draining off the roof.
What is the difference between fascia and bargeboard?
Where the fascia board is the vertical board behind your guttering on the lower edges of your roof, the bargeboard is the board used on the gabled ends of your roof. Similar to the fascia, it also gives the appearance at the roofline a nicely finished look and additional strength. It’s important to the overall look of the home ...
What is fiber cement?
Fiber-Cement. Fiber-cement fascia boards such as Har dieTrim are warp and rot-resistant. They can come with a smooth finish or simulated wood grain and texture for a natural appeal. You can also order them unpainted or prefinished.
What is composite fascia board?
Composite Fascia Boards. Recycled wood chips and sawdust are bonded with epoxy resin to form composite fascia boards. Though they are more expensive and are not rot-resistant, they are popular to use along with composite wood decks.
What to do after replacing fascia?
After you have installed the replacement fascia, all that is left to do is seal the joints and paint it.
Can you use exterior nails for painting?
If you choose nails, be sure to use exterior nails–typically a galvanized 4d casing nail. Finishing nails are sometimes used because they have much smaller heads so that they can be countersunk into the board. You can drive finishing nails deeper into the wood and fill the holes with putty or caulk before painting.
What size fascia board should I use for a house?
Occasionally on bigger homes builders will use a 1×8 for the fascia board if they are trying to achieve a heavy craftsman look on a more dominant structure. A fascia board of this size gives a beefy architectural look to the construction. The nominal size of a 1×8 is seven and a quarter inches.
How big is a gutter board?
Usually you have a 2×4 sub fascia behind this fascia board. Standard gutter size for residential homes is five or six inches. At the backside of a 5 inch gutter, the fascia board mounting area will be four inches tall.
Does it matter what size fascia board you use?
Conclusion. It really doesn’t matter what size fascia board you choose. If you have gutters, you will just want to make sure the gutter is able to fit completely on the fascia board. You could have issues with different size fascia boards depending on what type of brackets you use and what you use to adhere them with.
