If your throttle sticks to the open position while you’re out on a ride, apply the brakes and steer yourself to a place where you can stop. Pull the clutch and shift into neutral then turn off your motorcycle. You will need to find an alternative way to get it home.
- Keep calm. Take a deep breath. ...
- Shift to neutral. ...
- Put on your hazard lights. ...
- Apply the brakes. ...
- Navigate the car to the side or off the road to safety. ...
- Inspect your pedals. ...
- Call for help.
What should you do if your throttle sticks while in traffic?
If your throttle sticks while in traffic, what is the first thing you should do? A. Sound your horn to warn other vehicles. B. Rotate the throttle back and forth several times. C. Immediately squeeze the clutch lever, turn off the engine at the cutoff switch and apply the brakes.
Does the throttle stop a motorcycle when it gets stuck?
It will not stop the motorcycle entirely but it will help you slow down so that you can swerve accordingly. At the instance when the throttle gets stuck while you are accelerating towards a tree, a wall, or off a cliff, then the aforementioned routine won’t work.
Why is my throttle sticking to the closed position?
The fixes for a throttle sticking to the closed position will be the same as mentioned above. Inspect the throttle handle and replace/clean as needed, inspect the cable and lube/clean/replace if needed, and check the connection between the throttle cable and the carburetor. 99% of the time these will be your culprits, especially the first two.
How do I replace the throttle body?
How to Replace the Throttle Body? Turn off your engine and ignition Locate the throttle body of your vehicle under the hood Refer to the service manual for identification and location of the throttle body Remove the air intake duct from the throttle body once it is located Check the throttle body as ...
How to fix throttle sticking to closed position?
What to do if throttle sticks to motorcycle?
Why does my throttle feel loose?
Why is my motorcycle throttle not springing back?
Why won't my throttle accelerate?
How to stop a motorcycle when throttle sticks?
How often should you lubricate throttle cables?
See 2 more
What to Do If throttle is stuck open?
2:013:43What to do in a Stuck Throttle Situation | Edmunds.com - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you're in a panic situation you're more likely to stab at the button some manufacturers recognizeMoreIf you're in a panic situation you're more likely to stab at the button some manufacturers recognize that and have set up their stop buttons that way let's try that here.
Why does my throttle stick open?
A sticky throttle could be caused by worn cables, lack of lubrication in the cables or the cable getting bound up somewhere in the mechanism. Or it can be caused by an issue with the carburetor or EFI. The cables can bind under the tank or in the handgrip.
How do you fix a sticky throttle cable?
Pour penetrating oil into the cable (Photo 1). Grab the inner cable with pliers and work it up and down to loosen it. When the cable moves freely and all the penetrating oil has drained out, squirt silicone lubricant into the funnel to keep the cable sliding freely. Reinstall the cable (Photo 2).
How do I get my throttle snap back?
0:484:15Throttle grip not snapping back - a new look at things - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd just anything really you just push down on it. So you see it's push down stance. Right back pushMoreAnd just anything really you just push down on it. So you see it's push down stance. Right back push down on it snaps right back so you know that it's not the spring.
What is the most common cause of a stuck accelerator?
If your accelerator were to stick it would most likely be caused by a floor mat or other object getting jammed under the gas pedal. This could obviously be avoided by keeping your vehicle clear of clutter and making sure floor mats are properly fixed in place.
What do you spray throttle cable with?
1:242:32Motorcycle Tech Tips: How To Lube Control Cables | MC GARAGEYouTubeStart of suggested clipEnd of suggested clipRegular old engine oil works fine and you can use pretty much any lubricant you want but steer clearMoreRegular old engine oil works fine and you can use pretty much any lubricant you want but steer clear of solvents like wd-40. And penetrating oil now holding the cable vertically.
Can you use wd40 on throttle cables?
Some cables have a slick inner sheath that will gum up if exposed to solvents or harsh chemicals, so do NOT use WD-40 or any other type of penetrating oil. Regular motor oil works great if you don't have an appropriate aerosol product.
Can you lubricate a throttle body?
Step 8: Before replacing the throttle-body ducts, put a drop of household general-purpose oil on the shafts of the throttle shaft where it enters the throttle body. Use a small cotton swab, and don't overdo it – just a small drop of oil will help keep the throttle blade rotating smoothly. One drop should be fine.
What are the symptoms of a faulty throttle body?
7 Symptoms of a Bad or Failing Throttle BodyLack of Power. ... Issues while accelerating. ... Higher or Lower Idling. ... Dirt or Grime Build-up. ... Poor Mileage. ... Electrical Problems. ... Check Engine Light.
Why is my throttle cable not snapping back?
If the throttle does not completely return the cable may be binding, incorrectly routed, frayed, or corroded, which warrants further investigation. With the bike OFF, twist the trottle open to the stop and let go. Make sure the throttle returns to the closed position quickly and easily.
How do I fix error code P2112?
What repairs can fix the P2112 code?Repairing or replacing wiring harness as needed.Replacing faulty throttle position sensor.Replacing throttle body actuator.Fixing a poor electrical connection point.Unsticking the throttle body plate.
What are the symptoms of a throttle body?
When a throttle body is not functioning correctly, you'll usually notice a distinctly poor or very low idle. If the problem is really severe, you might even begin stalling when coming to a stop or when the throttle is quickly pressed.
How to fix throttle sticking to closed position?
The fixes for a throttle sticking to the closed position will be the same as mentioned above. Inspect the throttle handle and replace/clean as needed, inspect the cable and lube/clean/replace if needed, and check the connection between the throttle cable and the carburetor. 99% of the time these will be your culprits, especially the first two.
What to do if throttle sticks to motorcycle?
What should you do if the motorcycle throttle sticks? When the motorcycle throttle sticks to acceleration mode, pull on the clutch, shift to neutral, and turn off the motorcycle. Do not turn on the motorcycle until the issue is resolved. If the throttle sticks to the closed position, turn off the motorcycle and inspect and clean the throttle and the throttle cable.
Why does my throttle feel loose?
It almost feels like the throttle is very loose. If this is happening to you, it most likely means your throttle cable is broken or is not connected to the carburetor at all. A broken throttle cable can be difficult to diagnose because it may be snapped somewhere inside the sleeve which is hard to see .
Why is my motorcycle throttle not springing back?
If you’ve gone through all the previous steps of cleaning everything that has to do with your throttle but you’re having issues with the throttle not springing back, your likely culprit is a loose throttle cable (a problem that won’t be fixed by cleaning it). Tightening a loose throttle cable is easily fixable. All you’ll need to do (on most motorcycles) is adjust the lock nut found just right off the throttle where the cable runs out of.
Why won't my throttle accelerate?
The other half may be wondering about a throttle that won’t accelerate at all because it’s stuck in the closed position. It is a much more dangerous situation if your throttle cable is stuck to the open position because your motorcycle will continue to try and accelerate.
How to stop a motorcycle when throttle sticks?
If your throttle sticks to the open position while you’re out on a ride, apply the brakes and steer yourself to a place where you can stop. Pull the clutch and shift into neutral then turn off your motorcycle. You will need to find an alternative way to get it home.
How often should you lubricate throttle cables?
While you’re at it, you should do this to the brake cables as well. This should be done about once a year. You may notice that when you do this, some black nastiness may come out at the end of the cable sleeve.
What to do if braking does not stop the car?
If, for whatever reason, braking does not stop the car, then shift it into neutral and steer safely to the shoulder. NHTSA cautions that the vehicle's diagram showing the location of Neutral may be misleading. It is worth practicing in advance, but in the actual event, be sure push the shifter out of drive.
How to shift shifter from drive to neutral?
Even today’s shifters which may vary from the familiar “Park, Reverse, Neutral, Drive, Low” convention of the past will shift from drive into neutral just by pressing forward on the shifter, he said. “If you are worried about this, practice it a few times.”
How long does it take for a Toyota engine to stop?
With an engine stop/start button this requires a three-second hold on the button to stop the engine, according to Toyota. Other companies’ products may require a shorter hold, but holding down the “Start/Stop” button should work.
What happens if the brakes don't stop?
If, somehow, the brakes don’t stop the car and it won’t shift to neutral, then shut the engine off. Stopping the engine will eliminate the power assist to the brakes and steering, so they will get harder to operate, but they will still work, Toyota says.
What to do if your car stops and you can't drive it?
Once the car has stopped, call a dealer or repair shop to tow it, do not drive it, advises NHTSA. The agency has a hotline for questions: 888-327-4236.
How to avoid accidentally pressing the accelerator instead of the brake?
The first order of business is to ensure familiarity with the car and its controls, advises Popular Mechanics magazine’s automotive editor Larry Webster. Check the placement of the pedals to avoid accidentally pressing the accelerator instead of the brake. Practice shifting the transmission into neutral. Practice shutting the engine off with the transmission in drive.
Why is it important to switch the key ignition to the ACC position?
If the car is equipped with a conventional key ignition, it is important to switch it to the “ACC” or accessory position, not to “Off” because doing so will lock the steering wheel while the car is moving.
How to clean throttle slider without removing carburetor?
You can also clean the throttle slider without removing it from the carburetor. Just use a degreaser at the rotation joint of the slider arm.
How to fix a sticky throttle on a motorcycle?
There are 4 ways to prevent and fix a motorcycle throttle that sticks. Proper throttle cable maintenance which includes lubricating, adjusting, and checking the cable routing. Inspect the throttle lock and bar ends. Check the throttle tube. Check the motorcycle carburetor. Knowing the causes of sticky motorcycle throttles can greatly help in ...
What is a throttle cable?
The throttle cables are the cables that connect the throttle to the butterfly valve. Any disruptions on the cables are usually the main causes for a sticking throttle.
How to clean a throttle slider?
Clean the carburetor because any dirt and debris can cause the throttle slider to stick. Clean the carburetor by using seafoam. This eliminates varnish and accumulated grease. You can also clean the throttle slider without removing it from the carburetor.
Why does my throttle stick?
Cables that are too tight can also cause the throttle to stick. There should be at least two to three millimeters of looseness to the cables. This may vary from model to model to refer to the manual for the exact measurement. Generally speaking, the cables must be tight enough that they’d snap back into position after flicking.
How many cables are there in a carburetor?
There are two main cables connected to the throttle. One controls the opening of the valve for the intake of the carburetor while the other closes it. These cables will lose their original lubrication over time. Make sure to update its lubrication to keep it functional.
What is sticky throttle?
September 12, 2020. A motorcycle throttle that sticks is a dangerous and inconvenient issue . A sticky throttle disables you from accelerating smoothly. It may also lead the throttle to suddenly backfire.
Why is my throttle sticky?
A sticky throttle could be caused by worn cables, lack of lubrication in the cables or the cable getting bound up somewhere in the mechanism.
How to stop a motorcycle from accelerating?
The correct answer is C Correct. Squeezing the clutch will stop the motorcycle accelerating. Turning off the engine will stop it over revving. Then you can apply the brakes.
What to do if playback doesn't begin?
If playback doesn't begin shortly, try restarting your device.
Where do cables bind?
The cables can bind under the tank or in the handgrip.
Can you use lubricant on old cables?
A new set of cables is relatively cheap and is a better option than trying to lubricate old cables. You can use lubricant for a short time, but it won't fix the problem permanently.
How to tell if throttle body is bad?
The most common symptom of a bad throttle body is a check engine light on the dashboard. You may also notice signs like rough idle, rough acceleration, or misfires during acceleration. High or low Idle RPM is also quite common when your throttle body is bad.
Why is the combustion process not occurring properly when the throttle body is damaged?
However, the combustion process will not occur properly when the throttle body is damaged due to an imperfect air/fuel mixture.
Why does my car have a check engine light?
The throttle body has some angle sensors and other sensors installed inside of it. As soon as the car’s onboard computer detects a problem with the throttle body signal, it will cause the check engine light to illuminate.
Why does my engine misfire?
Misfires occur either when the air-fuel mixture is very wrong or when it comes to a weak spark from the spark plug. It is incomplete combustion inside the combustion chamber, in other words. As we told you before, a bad throttle body can mess with the air-fuel mixture, and it can also cause your engine to misfire.
What happens if the throttle body is not properly air cooled?
If the engine is not receiving proper air supply due to a damaged throttle body, the engine will suffer , and as a result, the driver would experience a drop in performance.
What is a throttle body?
The throttle body is an important mechanical component found in fuel injected vehicles that controls and regulates the amount of air flowing into the engine. When the throttle body is in its appropriate condition, the engine receives an ideal air and fuel ratio and offers optimum performance. However, when the throttle body is damaged, ...
Where does dirt come from in a car?
Even if you have an air filter on your car, dirt and soot come from the turbocharger, EGR valve, and the crankcase ventilation and get stuck on the throttle body valve. After a whole, it will cover the valve so much that the RPM will be affected.
How to fix throttle sticking to closed position?
The fixes for a throttle sticking to the closed position will be the same as mentioned above. Inspect the throttle handle and replace/clean as needed, inspect the cable and lube/clean/replace if needed, and check the connection between the throttle cable and the carburetor. 99% of the time these will be your culprits, especially the first two.
What to do if throttle sticks to motorcycle?
What should you do if the motorcycle throttle sticks? When the motorcycle throttle sticks to acceleration mode, pull on the clutch, shift to neutral, and turn off the motorcycle. Do not turn on the motorcycle until the issue is resolved. If the throttle sticks to the closed position, turn off the motorcycle and inspect and clean the throttle and the throttle cable.
Why does my throttle feel loose?
It almost feels like the throttle is very loose. If this is happening to you, it most likely means your throttle cable is broken or is not connected to the carburetor at all. A broken throttle cable can be difficult to diagnose because it may be snapped somewhere inside the sleeve which is hard to see .
Why is my motorcycle throttle not springing back?
If you’ve gone through all the previous steps of cleaning everything that has to do with your throttle but you’re having issues with the throttle not springing back, your likely culprit is a loose throttle cable (a problem that won’t be fixed by cleaning it). Tightening a loose throttle cable is easily fixable. All you’ll need to do (on most motorcycles) is adjust the lock nut found just right off the throttle where the cable runs out of.
Why won't my throttle accelerate?
The other half may be wondering about a throttle that won’t accelerate at all because it’s stuck in the closed position. It is a much more dangerous situation if your throttle cable is stuck to the open position because your motorcycle will continue to try and accelerate.
How to stop a motorcycle when throttle sticks?
If your throttle sticks to the open position while you’re out on a ride, apply the brakes and steer yourself to a place where you can stop. Pull the clutch and shift into neutral then turn off your motorcycle. You will need to find an alternative way to get it home.
How often should you lubricate throttle cables?
While you’re at it, you should do this to the brake cables as well. This should be done about once a year. You may notice that when you do this, some black nastiness may come out at the end of the cable sleeve.
