What size hole do I drill for a grease fitting?
3/16" Drill hole grease fitting drive fit is a straight fitting with 7.94 mm drive fit For 3/16" drill hole.
Do grease guns fit all nipples?
All About Grease Nipples These grease fittings are designed in such a way that the nozzle of a grease gun will fit snugly over the nipple.
Are there different size grease gun couplers?
Standard, Giant, and Metric Button Head Couplers fit to button head grease fittings with selection based on size of fitting. Grease Gun Adapter Kits are a must-have for any lubrication specialist.
What size threads is a Zerk fitting?
1/8" Pipe Thread Grease Fitting / Zerk Fitting.
Are grease fittings metric?
Metric Grease Fittings are available in both regular and stainless steel. Metric Grease Fittings are also referred to as Metric Zerk Fittings, Metric Lubrication Fittings, Metric Hydraulic Fittings, and Metric Zerks.
Are grease nipples a standard size?
The most common standard grease zerk size is 1/4"‑28 SAE‑LT and is often used in automotive applications. They can also be found in agricultural environments as well as other various standard duty applications. For heavy-duty applications, larger 1/8"‑27 PTF grease zerk fitting sizes can be found.
Are grease fittings different sizes?
Grease fittings come in many different styles. There are two grease fittings that are very common. These are the 1/4″-28 thread and the 1/8″ NPT thread. However, there are other less common grease fitting threads in use.
What is standard grease gun cartridge size?
Amazon.com: COREGEAR CG321 Standard Lever Grease Gun, 14-ounce Cartridge : Automotive.
Are there different types of grease fittings?
Three styles are available for the body, including several NPT thread sizes for tapped holes, a self-threading style, and a barbed, or drive, style for insertion into untapped holes. These fittings can also be found with British and metric threads.
Are all grease guns the same?
Types of Grease Guns Grease guns have three ways in which they can be powered: by hand, air or electricity. Aside from these variations, the hand-powered (or manual) grease guns can either be manufactured with a lever or a pistol grip.
Are Zerk fittings NPT?
Alemite is the original manufacturer of Zerk fitting and continues to be the “gold standard” for quality. These fittings have an 1/8″ NPT thread, Trivalent zinc plating, and are R0HS compliant.
How are Zerk fittings measured?
0:102:05The trick to tell grease zerks apart - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou can find one at loc and lube comm. But now let me show you a quick trick to tell the differenceMoreYou can find one at loc and lube comm. But now let me show you a quick trick to tell the difference between the quarter twenty eighth and the eighth inch pipe thread using just a tape measure. Okay.
Why is it called a Zerk fitting?
The Zerk design, named after Oscar Zerk, used a fitting much smaller than the Alemite pin-type and did not lock the hose coupler or hand gun and fitting together. Instead, the seal between them was maintained by the pressure of a pushing action when the operator applied the coupler to the fitting.
What is a grease fitting called?
A grease fitting, grease nipple, Zerk fitting, grease zerk, or Alemite fitting is a metal fitting used in mechanical systems to feed lubricants, usually lubricating grease, into a bearing under moderate to high pressure using a grease gun.
How do you attach a grease gun to a Zerk fitting?
0:073:53Getting A Secure Fit With Your Grease Gun - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou just turn this little doohickey right here. And it it grabs that ball. And it's on there. SoMoreYou just turn this little doohickey right here. And it it grabs that ball. And it's on there. So just to you know it sits there and just to demonstrate that.
What size grease fittings does Kubota use?
Kubota: 80 Piece SAE Grease Fitting Kit, Part # 77700-06282.