If you're mounting a shutter with a 1" depth such as louver or panel styles, we recommend 2-1/2" screws. If you're mounting shutters with a 2" depth such as board and batten style, we recommend 3-1/2" screws.
How many screws are in a bag of shutters?
Painted metal screws are commonly used by home improvement contractors to install exterior shutters. They work great when you are mounting exterior shutters on siding or real wood. Each bag contains 12 painted screws - enough for one pair of window shutters. 2.5" length.
What kind of Screws do you use to Mount shutters?
Our metal mounting screws are built to hold your shutters on your house even during the most severe windstorms. Painted metal screws are commonly used by home improvement contractors to install exterior shutters. They work great when you are mounting exterior shutters on siding or real wood.
What screws and spikes are used to install vinyl exterior shutters?
Shutters screws and spikes are used to install vinyl exterior shutters. Screws secure the shutters to soft siding, like wood. Spikes will hold vinyl shutters to solid surfaces, like brick. Shutter screws and spikes are only sold in conjunction with vinyl exterior shutters. This pack of twelve (12) is enough to install one pair of shutters.
What size shutters do I need for my Window?
It is advisable to select a width size divisible into the window width. Shutter size should be between 25-50% of the window width in order to remain aesthetically pleasing. Never install house shutters that are wider than the window.
What screws to use to install shutters?
Painted metal screws are commonly used by home improvement contractors to install exterior shutters. They work great when you are mounting exterior shutters on siding or real wood.
What size anchors for shutters?
Note: For masonry installation use a ¼" masonry bit and drill a 2" deep hole then insert a #8 wall anchor. For shutters up to 55", use four screws per shutter. For shutters 55" and over, use six screws per shutter.
What is a standard shutter size?
Standard vinyl shutters are available in the following heights: 35", 39", 43", 47", 51", 55", 59", 63", 67", 71". It is generally recommend that you go with the closest height available....Window WidthShutter Width16" or smaller7"17" - 22"9"-10"23" - 31"12"-14.5"32" - 40"14.5"-16.25"-17.75"
What screws to hang shutters on brick?
2:387:36Attaching Shutters To Brick Homes - YouTubeYouTubeStart of suggested clipEnd of suggested clipLike mortar or brick or concrete. So that's what the hammer drill setting is for I do have a masonryMoreLike mortar or brick or concrete. So that's what the hammer drill setting is for I do have a masonry bit in here. And I'll be able to drill out the remainder of that hole.
How many screws go into a shutter?
For shutters up to 55", use four screws per shutter. For shutters 55" and over, use six screws per shutter. See figures at right. For use on any surface including: wood, aluminum, vinyl, stucco, hardboard, brick, fiber cement, or masonry.
How are shutters attached?
Newer model shutters are mounted by hanging on a metal clip screwed into the wall. Older model vinyl shutters use a mounting clip called a "shutter lok." Shutter loks mount through existing holes in the shutter that extend to the house facing surface. Shutter loks look like long plastic nails.
Do shutters increase home value?
Yes, adding plantation shutters to your home will increase its market value as they instantly add a low-maintenance, elegant, and energy-efficient fixture to your home.
How do you install shutters?
0:442:18How to Install Exterior Shutters - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf you're installing into wood like we are here what you're gonna want to do is drill some pilotMoreIf you're installing into wood like we are here what you're gonna want to do is drill some pilot holes. And the holes where you make the shutter. Just like that okay pilot holes are drilled.
How do you replace house shutters?
1:567:13How to Replace Vinyl Shutters - YouTubeYouTubeStart of suggested clipEnd of suggested clipYou would drill a quarter inch hole and then you'd use those spikes to kind of do a little bit of aMoreYou would drill a quarter inch hole and then you'd use those spikes to kind of do a little bit of a friction fit. I'm not in love with these fasteners. So I did take a little bit different route.
How do you screw shutters into brick?
After you've drilled all the holes in the brick with the hammer drill, place a shutter fastener into each of the holes in the shutter. Line up the fasteners with the holes in the brick, then gently tap the fasteners in with a hammer to attach the shutter to your home's exterior. That's it!
How do you attach shutters to a brick wall?
DIY Installation for Vinyl Shutters1.Gather the Materials/Tools Required. ... Take Measurements of the Window. ... Order the Shutters From Your Supplier. ... Mark Where the Shutter Will Go. ... Drill Holes on the Shutters. ... Drill Pilot Holes on the Brick Wall. ... Install the Anchors on the Wall. ... Install the shutters.More items...•
How do you attach exterior shutters to brick?
1:352:53How to Install Vinyl Shutters with Spikes to Exterior Brick, Concrete ...YouTubeStart of suggested clipEnd of suggested clipUse a marker or all to mark the six mounting hole locations on the building drill a quarter inchMoreUse a marker or all to mark the six mounting hole locations on the building drill a quarter inch diameter hole two and a quarter inches deep at each of the points on the wall.
How do you attach wood shutters to a brick wall?
2:0411:56DIY Rustic windows shutters Part2, Installation on brick. - YouTubeYouTubeStart of suggested clipEnd of suggested clipI'm taking the center screw out of the center cross piece of each shutter and that'll be my centerMoreI'm taking the center screw out of the center cross piece of each shutter and that'll be my center hole. And once I line them up then we can pin with them or whatever to get them.
How do you attach shutters to brick?
After you've drilled all the holes in the brick with the hammer drill, place a shutter fastener into each of the holes in the shutter. Line up the fasteners with the holes in the brick, then gently tap the fasteners in with a hammer to attach the shutter to your home's exterior. That's it!
How do you reattach shutters to brick?
2:3614:56Shutter Repair on Brick Wall - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd put in our new screws. All right down my impact drill with my masonry bit all right let's giveMoreAnd put in our new screws. All right down my impact drill with my masonry bit all right let's give it a. Try. See that the plastic is burning it's.
How do you measure shutter size?
Measure for the shutter height at the left side, middle, and right side of the window opening from the top of the window to the bottom excluding any window sill. If the heights vary at each of these points, use the SMALLEST of the three measurements. This measurement will be the height of the shutter you need to order.
Low-Profile Ultra-Wide Truss Head Slotted Screws
When head height is important, these screws fit into spaces where other wide head screws won't fit. Also known as shutter screws, their ultra-wide truss head distributes the load over a large area for excellent holding pressure.18-8 stainless steel screws are chemical resistant and may be mildly magnetic.
Metric Low-Profile Ultra-Wide Truss Head Slotted Screws
Fit these screws into spaces where head height is important and other wide head screws won't fit. Also known as shutter screws, they have an ultra-wide truss head to distribute the load over a large area for excellent holding pressure. 18-8 stainless steel screws are chemical resistant and may be mildly magnetic.
What are shutter spikes made of?
Shutter Spikes. What are shutter spikes? Shutters Spikes are made from the same material as the shutter: a plastic called Polypropylene. They have a button head finish and a serrated shank.
What is a spike for shutters?
Shutter spikes are particularly useful for coastal locations where steel screws can rust and for natural brickwork installations where the shutter is unlikely to be removed. The heads of screws are colour matched to the shutters.
What are colour matched screws?
They are standard 2 ½ inch steel screws with the heads painted to match your shutters. If you ordered a pair of white shutters, we will supply you with white colour matched screws.
Can you fix shutters with painted property screws?
If you have a painted property screws may be the fixing of choice as it is easier to remove the shutters for periodic maintenance .
Can shutter spikes be unscrewed?
Unlike shutter spikes screws can be unscrewed and replaced . These fixings are particularly useful if you have painted walls that require periodic maintenance. How much are shutter spikes and screws? Fixings are supplied as standard with your order, you can choose between shutter spikes or screws.
How wide should a shutter be for a window?
Windows measuring less than 32 inches wide may use a single shutter that opens to one side. For shallow window openings, measure from the outside left of the window casing, or trim, to the outside right. Divide this measurement by two for the individual shutter width. Measure Window Height.
How long does it take to measure for exterior shutters?
Expect to spend about 5-10 minutes per window to obtain proper measurements.
What is composite shutter?
Composite shutters can be installed with functional hardware, but have a flat non-decorative back, which will be visible when the shutters are rotated over the window in a closed position. All styles of composite exterior shutters are heavier than their wood counterparts.
What is the difference between vinyl and polypropylene shutters?
There is a slightly different process to measure for vinyl shutters. Polypropylene shutters are sold in fixed widths at various intervals. They also have a different installation method to consider.
Do composite shutters need hinges?
All styles of composite exterior shutters are heavier than their wood counterparts. Composite shutters may need additional hinges to support the additional weight. Exterior windows have many variables (siding material, casing width, etc.) which results in a modified approach to each application.
Can exterior shutters be installed to swing open and close?
Solid exterior shutters, in conjunction with quality outdoor hardware, can be installed to swing open and closed. Measurements of each window for functional exterior shutters need to be made with great precision to ensure a smooth installation. Multiple openings that appear to be the same size can often be very different.
Can shutters be installed in a permanent position?
Wood or composite shutters that will be installed in a permanent position can afford to be approximate in relation to the window size. This type of stationary installation can be accomplished with screws or bolts. Decorative panels may still look functional if they are installed with authentic shutter hardware.
