What are standard kitchen cabinet widths?
- Upper kitchen cabinets are 12, 15, 18, 24, 27, 30, 33, and 36 inches.
- Upper filler cabinets are 3, 6, and 9 inches wide.
- Standard base cabinet widths are 12, 15, 18, 21, 24, 26.25, 27, 30, 33, 26, 39 and 42-inches.
- Base filler cabinets in 6-inch and 9-inch widths.
- Tall cabinet widths are 18, 24, 30, and 33-inches.
What is the standard height of an upper cabinet?
The standard height for upper cabinets from the floor is 54 inches, or 4 feet and 6 inches. This means the bottom of the upper cabinets should be this far from the floor. This comes from the sum of 34-and-a half-inch base cabinets, a 1-and-a-half inch thick countertop, and an 18-inch backsplash.
What is the standard height of Upper kitchen cabinets?
The ideal upper cabinet height is 54 inches above the floor. That is, the bottom edge of the upper cabinets should sit 54 inches off the ground.
How to measure the correct upper cabinet height from counter?
- The ideal upper cabinet height is 54 inches above the floor. ...
- In other words, hang upper cabinets 18 inches above the top of the countertop. ...
- Lower the height to 48 inches from the ground to accommodate those with limited mobility. ...
- Increase the height to 66 or 72 inches from the ground for cabinets above a range. ...
How high should upper kitchen cabinets be mounted?
The upper wall cabinets in kitchens almost always are installed so the bottom edge of the cabinet is 54 inches above the floor.
What are the standard sizes of kitchen cabinets?
Base Cabinet DimensionsHeightWidthDepthMINUS COUNTERTOPS-34.5 INCHES9-46 INCHES(IN 3 INCH INCREMENTS)MINUS COUNTERTOPS-24 INCHESINCLUDING COUNTERTOPS-35-36 INCHES9-46 INCHES(IN 3 INCH INCREMENTS)INCLUDING COUNTERTOPS-25-26 INCHESDec 7, 2018
How wide are typical upper kitchen cabinets?
9”-36”What is the standard size for upper kitchen Cabinets? The average wall or upper kitchen cabinets are 30”-42” in Height, 12”-24” in Depth, and 9”-36” in Width.
Are all upper cabinets 12 inches deep?
Standard wall cabinets (sometimes referred to as “upper cabinets”) are 12 inches deep; standard base (below-counter) cabinets are 24 inches deep. But these days, says Scott, more companies are making wall cabinets 15 inches deep, which gives more storage space.
What is the recommended depth for upper wall cabinets?
Most commonly, wall cabinets are 12 inches deep, since this provides a good compromise between storage space in the kitchen cabinets and workable countertop space below the cabinet.
What size cabinet goes over a stove?
Clearance for Safety. As you plan the sizing of upper cabinets, allow 30 inches of space between the bottom of the cabinet and the cooktop of an electric stove. Gas stoves require a 36-inch clearance. The bottom of your overhead cabinet with the range hood installed should be 66 to 72 inches from the floor.
Are all upper cabinets the same depth?
There is no set rule, upper cabinets aren't made in any one specific height or width, even the depth can vary. It is true that generally upper cabinets tend to be shallower than lower ones.
How deep are Ikea upper cabinets?
15 inches deepMost IKEA wall cabinets are 15 inches deep. A few of IKEA's wall cabinets are 24 inches deep. These wall cabinets are typically mounted over refrigerators. A complete IKEA wall cabinet consists of the cabinet box, doors, hinges, and shelves.
What is the normal distance between countertop and upper cabinets?
The standard distance between the top of a kitchen counter and the bottom of the wall cabinets above it is 18 inches. For the average person, this distance is the ideal balance between plenty of space to work on the countertop and the ability to reach all of the shelves in the cabinet.
How close can cabinets be to door?
When designing around doors and windows, it's important to remember to leave space between the cabinetry and any door/window trim (or casing). At least 3″ of space between the cabinets and any trim work is ideal although this can vary depending on your space.
Do upper and lower cabinets have to line up?
Luckily, there are few rules about cabinet placement. Upper and lower cabinets may align at each end, and they sometimes do. However, aligning every upper and lower cabinet throughout the room is rare. As long as the cabinets are installed securely, almost anything goes.
Can you use a wall cabinet as a base cabinet?
0:092:37Using Wall Cabinets as Base Cabinets - YouTubeYouTubeStart of suggested clipEnd of suggested clipThis design tip to discuss using wall cabinets as base cabinets. Let's start with understanding someMoreThis design tip to discuss using wall cabinets as base cabinets. Let's start with understanding some common sizes all base cabinets are 24 inches deep and wall cabinets are 12 inches deep.
How do you make cabinets?
1:1220:57Build Cabinets The Easy Way | How to Build Cabinets - YouTubeYouTubeStart of suggested clipEnd of suggested clipIn my opinion the easiest way to go about building cabinets is to first pre-cut. All of your pieces.MoreIn my opinion the easiest way to go about building cabinets is to first pre-cut. All of your pieces. Then with all of your pieces. Pre-cut. All you have to do is well hook them together.
How far should the cabinets be from the ceiling?
An 8-foot ceiling with a 12 inch soffit will need 30 inch cabinets. An 8-foot ceiling with a crown molding finish will typically use 36 inch cabine...
What is the standard size of kitchen cabinet doors?
Kitchen cabinet door heights are typically between 24 and 30 inches. If the base cabinet features a drawer, the door height below it the drawer is...
What size cabinet goes over a stove?
Take note of any crown molding above your kitchen cabinets, as well as the height of the other wall cabinets. See the table in our ‘Wall Kitchen Ca...
How do I measure kitchen cabinets?
Taking accurate measurements are an important step to functional kitchen design. Learn how to measure your kitchen with our step-by-step guide.
What are standard kitchen cabinet depths?
The standard depth for full height base cabinets is 24 inches deep. For islands and applications where wall obstacles prevent full cabinet depth op...
How deep should upper cabinets be?
Standard wall cabinet depth is 12 inches, and 24 inches deep over the refrigerator to allow easier access. When designing a kitchen with a staggere...
How tall is a base cabinet?
Base cabinets may have a single door, double doors, a series of drawers, or a combination of a drawer and doors; It all depends on your design needs.The standard size of a base cabinet is 34.5 inches tall without the countertop and 36 inches with the countertop. The toekick portion, which is the bottom part of the cabinet that sits on the floor, ...
What size are wall cabinets?
Wall cabinets come in a wider range of sizes. So what are the standard cabinet sizes for wall cabinets? For height, you have the option of 30 inches, 36 inches, or 42 inches. Once installed over your base cabinets, the top of your wall cabinets will be at 84 inches, 90 inches, or 96 inches, respectively. This leaves 18 inches of space between your ...
How deep should a kitchen cabinet be?
Generally, the standard wall kitchen cabinet depth is 12 inches deep, but some can go up to 24 inches deep. For example, wall cabinets designed to be installed over a refrigerator will be deeper so the front of the cabinet lines up with the front of the appliance.
What is the hole in the middle of an oven cabinet?
Most oven cabinets come with a single hole in the middle for a single oven and three drawers underneath it.
How wide are pantry cabinets?
The tall cabinet family line consists of pantry cabinets and oven cabinets. Pantry cabinets start at 12” wide all the way up to 30” wide. Oven cabinets start at 30” wide up to 33” inches (33” is the most common oven cabinet that will accommodate 90% of ovens in the market).
Why do you need to replace kitchen cabinets?
One of the most common renovation projects in your home is replacing your kitchen cabinets to add value, design and style in your home. A project such as this will involve many tasks. Figuring out the right cabinet design, relocating the appliances to new locations, adding cabinetry to increase storage, creating a kitchen island for a nice open concept and many more. Either way it is important to understand the standard kitchen cabinet sizes to make the kitchen renovation journey with ease.
How tall is a cabinet door?
If the base cabinet features a drawer, that drawer is usually about six inches tall, while the door height below it is 24 inches.
What are Upper Kitchen Cabinets?
Upper kitchen cabinets do not touch the ground and are available in different sizes. These cabinets also don’t have the same heavy-duty structure as base kitchen cabinets because they don’t need to support any countertop.
What are the Pros and Cons of Upper Kitchen Cabinets?
The standard upper kitchen cabinets with double doors or a single door can provide lots of storage space with a composed and clean appearance.
Standard Dimensions for Upper Kitchen Cabinets
For proper installation, make sure that you plan your cabinets well and install them 54 inches from the floor to the bottom of the wall cabinets. It will leave a height of 18 inches if you subtract the 36 inches height of the base cabinet with the countertop included, as this is the standard height for the backsplash.
Frequently Asked Questions
There are custom cabinet makers who provide design services for free. After you get the measurements, all you have to do is send them to the manufacturers, and they can then come up with a plan for interior dimensions, different heights, the type of cabinets, and base cabinet widths.
How tall are base cabinets?
Kitchen base cabinets are the most expensive of all kitchen cabinets, and for a good reason: We ask a lot from them. When buying semi-custom or stock preassembled or RTA cabinets, base cabinets are generally available in these dimensions: Height, without countertop. 34 1/2 inches. Height, with countertop. 35 to 36 inches.
What is the standard height of a wall cabinet?
Standard heights. 12, 15, 18, 24, 30, 36, 42 inches.
How deep are stock cabinets?
The depth measurement is taken from the front outer front edge of the cabinet to the wall. Stock base cabinets are generally 24 inches deep (not counting countertop overhang). Deeper base cabinets make it difficult for you to reach the back of the counter or to plug in appliances. If you have ever had difficulty reaching items in a blind corner (where two sets of cabinets meet at a right angle), you will know how distances beyond 24 inches quickly become difficult.
What is the difference between a 12 inch and 24 inch cabinet?
Tall cabinets are typically available either at 12-inch or 24-inches deep. The 12-inch variety is typically used for pantry cabinets that store canned goods, while 24-inch-deep cabinets make good utility cabinets for brooms, mops, and appliances. Pull-out and slider hardware can give greater functionality to 24-inch-deep cabinets.
What is a tall cabinet called?
These tall cabinets are sometimes known as pantry cabinets or utility cabinets. As befits the name, tall kitchen cabinets can even extend from floor to ceiling. Height.
How high should a countertop be?
It is often said that "countertops should fit the user.". Due to individual needs, countertops sometimes go as low as 32 inches and as high as 38 inches, but these heights require custom fabrication.
How tall should a kitchen countertop be?
After adding a countertop, the eventual height of most base cabinets is between 35 and 36 inches, depending on the material used in the countertop. Height is flexible.
How tall are pantry cabinets?
Pantry cabinets extend from the floor to ceiling. Tall Cabinet or “Pantry” Sizes. Pantry cabinets are usually 84″ to 96″ tall with depths 12″ -24″. Widths range from 12″ to 36″. Keep in mind that the 96″ tall cabinets would touch the ceiling if you have standard 8′ ceilings.
How deep are kitchen cabinets?
A standard base kitchen cabinet will measure about 34-1/2″ high and 35″ to 36″ high from your kitchen floor with a countertop. The standard depth of a base kitchen cabinet is 24″ without a countertop and 25″ to 26″ with a countertop. In some cases up to 30″ deep, however deeper cabinets can make it more difficult to reach all areas of the counter and access plugs for small appliances. Standard base cabinet with countertop widths: 12″, 18″, 24″, 30″ 33″, 36″ and 48″.
What is a tall kitchen cabinet?
Tall kitchen cabinets or “pantry” cabinets are the cabinets used to construct those wonderful pantries we see in so many updated kitchens. They are also referred to as utility cabinets and are commonly used in laundry rooms and mudrooms as well. Pantry cabinets extend from the floor to ceiling.
What is the best size pantry cabinet for storing food?
Pantry cabinets that are 12″ deep are perfect for storing and reaching boxes and cans of food. Sliding drawers or pull-outs are commonly used in 24″ deep pantries so you can locate and reach items in the back with more ease. A good standard width would fall around 24″.
What is the foundation of a kitchen?
The Foundation – Base Cabinets. Base cabinets rest on the floor and serve as the foundation for other kitchen design elements. These kitchen cabinets serve as the base for heavy countertops & sinks that are a necessity in any kitchen. Base kitchen cabinets consist of drawers and/or shelves and outline the kitchen floorplan.
What is a wall cabinet?
Wall cabinets are made to store food items and small, lightweight kitchen accessories. They are very diverse in design and most likely the focal point of your kitchen. The choice of your wall kitchen cabinet is determined by the ceiling height and your design preferences.
What to consider when choosing kitchen cabinets?
Factors to take into consideration before you choose kitchen cabinets include the space available and the style desired. Of course, your budget also determines the type of kitchen cabinets you will choose for your home. Always compare different top kitchen cabinet brands so that you can decide on what will work best for you.
How high should upper cabinets be?
Upper cabinet height will vary based on both space available and aesthetics. Since they need to be positioned 18 inches above the countertops, choosing kitchen wall cabinets is a decision to be made after selecting both base cabinets, countertops, and filler layer (if any).
How tall is a standard cabinet?
Standard cabinet height for base cabinets is almost invariably 34.5 inches. While that may be too low for really tall individuals who shouldn’t have to stoop to use their kitchen surfaces, this base height can be easily increased by adding a countertop underlay or choosing a thicker countertop. An inch or an inch and a half can make a huge difference in cabinet size and installation.
What are standard base cabinet widths?
The standard base cabinet widths are 12, 15, 18, 21, 24, 26.25, 27, 30, 33, 26, 39 and 42-inches. Filler cabinets are available in 6 and 9-inch widths.
How deep should kitchen cabinets be?
Standard depths are 12, 15, 18, 24 inches, but 12 inches is the most common depth for regular wall cabinets used to store food and dishes. This depth allows sufficient space beneath the cabinets to make countertops ranging in depth from 24 to 26 inches usable.
How tall are utility cabinets?
Tall pantry or utility cabinets are often the roomiest of kitchen cabinetry. Standard tall cabinets are 12 or 24 inches deep and come in 12-inch, 24-inch, or 36-inch widths. They range in height from 84 to 96 inches (with 96 inches being a floor-to-ceiling cabinet in a room with standard 8-foot ceilings),
How wide are wall cabinets?
Like base cabinets, standard wall cabinets come in widths ranging from 9 to 48 inches in 3-inch increments. There are, however, few kitchens that can accommodate 48-inch-wide wall cabinets.
How tall should a cabinet be?
However, if the homeowner wants pull-outs or storage installed on the back of the cabinet doors and inside the cabinet, 36-inch-wide tall cabinets are recommended. Most of the time, 24-inch-wide tall cabinets work well for both pantry and utility cabinets.
Standard Kitchen Cabinet Dimensions: Base, Upper & Corner Sizes
Selecting the right kitchen cabinet sizes can greatly improve the overall flow and ease of access through the kitchen, so knowing the standard kitchen cabinet dimensions is essential when choosing the best options for your kitchen.
Standard Kitchen Base Cabinet Dimensions
When buying semi custom cabinets or stock cabinets, the standard kitchen base cabinet dimensions are generally available in these sizes:
Standard Upper Cabinet Dimensions (Wall Cabinets)
When buying semi-custom or stock cabinets, upper cabinets are generally available in these dimensions:
Standard Tall Kitchen Pantry Cabinet Dimensions
Tall kitchen cabinets, sometimes known as pantry cabinets or utility cabinets, are often installed alongside the refrigerator, and can extend from floor to ceiling. We incorporated a tall kitchen cabinet next to the refrigerator in both our current and previous kitchen–and we love the ample storage space it provides!
Kitchen Design Ideas and Inspiration
Below, I’ve gathered several beautiful and inspiring kitchen designs to give you some ideas regarding kitchen cabinet layout options, as well as cabinet styles and colors.
Where to Shop for Standard Size Kitchen Cabinets
Investing in new kitchen cabinets doesn’t have to break the bank. Below are a few places to shop for semi-custom or stock kitchen cabinets:
