A bathroom sink can range in size from as small as 10” up to much larger sizes up to 70 ot 80” (though sinks that big are not very common). The most common size for a bathroom sink is in the 20” to 30” range.
What are the standard dimensions of a bathroom sink?
Rectangular and oval
- Small: From 15 to 20 inches long and nine to 12 inches wide, with a depth between 5-3/4-in. and seven inches.
- Medium: From 20 to 30 inches long, 19 to 24 inches wide and about seven inches deep.
- Large: From 30 to 50 inches long, 19 to 24 inches wide and about five inches deep. ...
How high should a bathroom sink be?
Typically, installing a bathroom sink in the range of 29-36 inches high could be a good idea considering that the traditional standard type has been 32 inches. This type of sink can serve both children and adults. In cases where the bathroom sink is meant for adults, installing it at the height of 36 feet could be the best idea for you.
How big should a bathroom sink be?
Most rectangular bathroom sinks are 19 to 24 inches wide. They are 16-23 inches in length. And 5-8 inches in depth measured from the lowest point to the rim of the basin. Round sinks have a typical diameter of 16 to 20 inches. One-of-a-kind concrete sink with vanity.
How do you measure a bathroom sink?
- The first step is to thoroughly clean and dry the sink surface to get perfect measurements. ...
- Measure the length of the edges. The most important measurement is the depth of the sink and the other measurement is the width of the sink.
- Measure the height of the sink. The height of the sink as explained in the section above is how deep it is. ...
How do I know what size bathroom sink I need?
HOW TO MEASUREIf this is a simple replacement, measure the length, width and height of your current sink and choose one with the same measurements.Measure width from side to side and length from front to back–where you measure will depend on the installation type. ... Height and depth are two separate measurements.
How big is a small bathroom sink?
Small: From 15 to 20 inches long and nine to 12 inches wide, with a depth between 5-3/4-in. and seven inches. Medium: From 20 to 30 inches long, 19 to 24 inches wide and about seven inches deep.
How do you measure for a replacement sink?
0:372:45Measuring for a Top-Mount Sink Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe length and width of the cut out. Any new sink you select should be larger than the size of theMoreThe length and width of the cut out. Any new sink you select should be larger than the size of the cutout in order to properly cover the hole. Finally measure the length of the base cabinet.
Do sinks come in standard sizes?
The most common sizes for a kitchen sink are 30" or 33", however a standard size could measure anywhere between 24" and 36" in length. The bulk of what you find while shopping will fall within this size range. Generally, sinks up to 30" will contain one large single bowl.
Is a 24 inch sink big enough?
Nearly every sink style works in small kitchens, as long as your sink is between 22 to 24 inches on average. Anything over 27 or 30 inches is too large for a small kitchen. You also need to conserve as much counter space as possible. Since you have less space, single-bowl sinks may work better in your kitchen.
How do you measure a bathroom sink for replacement?
Here's how to measure for a basinStart with the width. Measure the distance from one side of the basin to the other.Next, measure the length. This is the distance from the rear of the basin to the front.Then, on the exterior of the basin, measure from the top to the bottom. ... Finally, measure the depth.
How much does it cost to replace a bathroom sink?
The national average materials cost to replace a bathroom sink is $177.77 per sink, with a range between $105.11 to $250.43. The total price for labor and materials per sink is $589.93, coming in between $478.97 to $700.89.
Are oval bathroom sinks outdated?
While some people see oval sinks as classic, others see them as out-of-date. Since they aren't geometric, they are not well-liked in modern design.
How long does it take to replace a bathroom sink?
How Long Does It Take to Change a Bathroom Sink? If you're just swapping out a sink for another or dropping a vanity and sink into place, the job usually takes less than four or five hours.
Will a 30 inch sink fit in a 30 inch cabinet?
A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide.
What size sink fits in a 24 inch vanity?
What Size Bathroom Sink Do I Need for a 24-inch Vanity? If your vanity is 24-inches wide, look for a sink no more than 16-inches long to get at least four inches of counter space per side. The maximum sink length (or diameter) you can get is 22 inches, but this will leave no usable counter space.
How wide is a standard sink?
A 30-inch wide or a 36-inch wide cabinet are most common. The height of the cabinet can be customized, but 36 inches is average. A typical 33-by-22-inch sink will fill a 36-inch base cabinet.
What are the dimensions of a small bathroom?
What is this? SMALL: A small bathroom is typically around 35-40 square feet. While space is definitely at a premium in a small bathroom, decorating this area can be a valuable and exciting interior decorating lesson in maximizing space and utilizing color to liven up the room, but also to visually enlarge it.
What size bathroom sink fits in a 24 inch cabinet?
What Size Bathroom Sink Do I Need for a 24-inch Vanity? If your vanity is 24-inches wide, look for a sink no more than 16-inches long to get at least four inches of counter space per side. The maximum sink length (or diameter) you can get is 22 inches, but this will leave no usable counter space.
What are standard bathroom vanity sizes?
Standard widths for vanity cabinets are 24, 30, 36, 48, 60 and 72 inches, however, you may find some in-between sizes out there. The standard depth of a vanity, from front to back, is typically between 20 to 21 inches. However, there are narrow depth options available which are usually 18 inches.
What size sink fits in 30 inch cabinet?
A 36″ base cabinet can handle a 33″ sink at most; a 30″ cabinet should be fitted with a sink no larger than 27″ wide. The average 24″ sink base cabinet comfortably accommodates a standard 22″ sink; be sure to consider the depth of your sink when planning storage inside the base cabinet.
Bathroom sink dimensions fall within standard ranges, but there are no rules. The good news? You can usually find a right-sized sink for any bathroom
Bathroom sink dimensions fall within standard ranges, but there are no rules. The good news? You can usually find a right-sized sink for any bathroom.
How To Measure a Bathroom Sink
Product descriptions for undermount, vessel and drop-in sinks usually provide the inside dimensions, measured from the inside rim at the top of the sink. This defines the amount of available washing space.
Common Bathroom Sink Sizes
Standard sink sizes for top-mount and undermount sinks vary according to the shape of the sink. Most are within the following range:
What Size Sink Do You Need?
When installing a top-mount or undermount sink, you generally need about two inches of space from the front of the countertop to the front of the sink, and at least that much between the back of the sink and the backsplash depending on the faucet.
Standard Sink Sizes
What is considered a standard size bathroom sink? The answer typically depends on the application. In addition, the size of the bathroom and the number of people that will be using the bathroom sink. A bathroom sink can range in size from as small as 10” up to much larger sizes up to 70 ot 80” (though sinks that big are not very common).
Undermount Bathroom Sinks
Undermount bathroom sinks are common types of bathroom sinks. These bathroom sinks are typically under 20” in order to give you enough space to do a number of tasks while not being overly large. Undermount bathroom sinks can be installed as a pair as well, given that there is enough space on the vanity or countertop.
Vessel Sink Sizes
Vessel bathroom sinks are bathroom sinks that sit beautifully on top of a vanity or countertop. When it comes to the size, a vessel bathroom sink will typically measure between 15” and 25” though larger vessel sinks are becoming more popular. Depending on whether the sink is round or rectangular, the dimensions could vary.
Wall Mount Sink Sizes
Wall mounted bathroom sinks are beautiful pieces of bathroom furniture that are mounted squarely on a wall in your bathroom. Because these bathroom sinks essentially replace your bathroom vanity, they can be larger than other bathroom sink styles.
Pedestal Sink Sizes
A pedestal bathroom sink is a basin placed beautifully on a pedestal stand, creating a unique fixture for any bathroom design. The most common size for a pedestal bathroom sink is between 22” to 28”. A pedestal bathroom sink will almost always be within this size range with a few exceptions.
Drop-In Sink Sizes
Drop-in bathroom sinks are very easy to install and work beautifully on a matching vanity or countertop. Drop-in sinks are installed differently than undermount bathroom sinks, but they are typically the same general size. The size of a drop-in bathroom sink will be 16” to 24” in length while being about 12” to 20” from front to back.
Semi-Recessed Sink Sizes
A semi-recessed sink can be seen as somewhat of a combination of a vessel sink and a drop-in sink in terms of how it is installed. The size of a semi-recessed bathroom sink is 16” to 24”, but can vary depending on the size of the vanity or sink.
How big is a sink?
Large sink sizes, most commonly used for washing hair or clothes, start at 34 inches long, 22 inches wide with a general water depth of 12 inches. Though there are also sinks that end at 72 inches wide, 24 inches long with the same water depth, so keep your measurements in mind when purchasing.
How wide is a small sink?
In general, small sink sizes are usually round in design, though they still carry a decent water depth, usually around 6-7 inches. Small sinks usually run 15 inches wide, 9 inches long, ...
What are the most common sink sizes?
The two most common types of sinks are round or oval designs and rectangular or square. Generally, round sinks are smaller and generally deeper when it comes to water height whereas rectangular sinks are larger in overall measurements but more shallow in water depth.
How are sink sizes measured?
Sink sizes are measured based on their type. If it’s a round sink, you will get the length by circumference of the sink. Rectangular or square sinks will be measured by length and width. Typically if you are measuring out your space for a sink, you should take the interior width and length of the install space, most commonly a cabinet or vanity against the size of the the actual sink. Generally it is advised to leave about 1-2 inches extra when installing, as you will have more room to maneuver when installing.
How wide is a double sink vanity?
The obvious drawback is that these cabinets are very large and may not fit into every bathroom. The vanities usually start at a minimum of 60 inches wide and can go to 84 inches at the extreme.
How big is a stone resin sink?
Smaller Stone resign Sinks: Stone resin sinks usually run 23 inches long, 15 inches wide with a height of 5 inches.
What is a sink base?
Sink base cabinets are another common sink type found in most bathrooms, though your size is ultimately restricted to the average size of the base cabinet installed in your bath space. If you have trouble installing larger sized cabinets, it is often advisable to seek professional help to sort out the plumbing and space needs.
How long is a bathroom sink?
Shapes and uses determine the standard bathroom sink sizes we see in the market today. In an average bathroom size, sinks are 20 to 30 inches long. Their standard depth runs between 5 to 8 inches.
How deep is a wall mounted sink?
If you are looking for a minimalist sink, a wall-mounted sink or floating sink can be your go-to option. Measuring 16 to 23 inches long and 22 to 24 inches deep, a wall-mounted sink doesn’t come with a countertop. But you can attach a ledge above it if needed.
What is vessel sink?
A trendy sink design in powder rooms, vessel sinks sit atop the counter or a console. This type of sink is reminiscent of the washbasin used centuries ago before direct plumbing was present in homes.
Why are drop in sinks so popular?
Drop-in sinks are popular because of their affordability over undermount sinks. They are also easier to install and are compatible with most countertop materials, including laminate.
What is a drop in sink?
A drop-in bathroom sink is like an undermount sink, with only a difference in installation. Drop-in sinks have their lips or frames overlap on the counter, which takes away a few centimeters from your counter space.
What is an undermount sink?
Undermount sink: This is like a drop-in sink, except you have to measure underneath the countertop for the length, width, and height.
What is a pop up drain?
Most bathroom sinks come with a pop-up drain that lets you release or hold water in the basin in one press. When selecting a sink drain size, choose a size similar to or smaller than the hole in the sink.
How big should a bathroom sink be?
Depending on how much space your bathroom occupies, you can choose from the many small sizes that fall between 15 and 18 inches wide. The water depth and length does not differ much because smaller ones carry 5.75 inches of water and are 9 inches long, while the slightly large ones can hold 7 inches of water and are 10 inches long.
How wide is a round sink?
As for the width, remember that round sinks are usually about 16-20 inches wide, unlike rectangular and square ones that are 19-24 inches wide. Additionally, note that rectangular sinks are shorter front to back than the width.
What Type of Material Do You Want for Your Sink?
Sinks come in various materials. Each type of material offers different dimensions, so the kind of material you prefer for your bathroom sink will also determine what size of sink you get. For instance, if you are going for a granite sink, the size ranges from 4-6 inches deep, but the width of 16 inches is the same for smaller and larger sinks. Stone resins, on the other hand, have quite a considerable difference in size between the small and large ones. A small one’s dimensions are 5 inches deep, 15 inches wide, and 23 inches long, while a large one is 19 inches wide and 39 inches long, but the height is constant at 5 inches
How Spacious is Your Countertop?
If installing a sink into a vanity, regardless of its size, you must ensure that you leave adequate space along the sides, usually at least 4 to 6 inches. Therefore, if your countertop measures 25 inches, your sink should be between 13 and 17 inches wide.
What Kind of Faucets Do You Prefer?
The article describes how bathroom sink dimensions affect the type of faucet you buy too. Although most single-handle faucets go well with a single-hole sink, some have escutcheon plates allowing them to be compatible with three-hole sinks. The distance between the holes is what you should be concerned about; a sink with holes 4 inches apart will go well with a center set faucet. On the other hand, if the holes are 8-16 inches apart, you should pick a widespread faucet.
How much water does a bathroom hold?
Depending on how much space your bathroom occupies, you can choose from the many small sizes that fall between 15 and 18 inches wide. The water depth and length does not differ much because smaller ones carry 5.75 inches of water and are 9 inches long, while the slightly large ones can hold 7 inches of water and are 10 inches long.
How deep should a sink be for shampoo?
Extra deep sinks can hold 12 inches of water, while shallow ones only go as deep as 6 inches. As for the width, remember that round sinks are usually about 16-20 inches wide, unlike rectangular and square ones that are 19-24 inches wide. Additionally, note that rectangular sinks are shorter front to back than the width.
How wide is a single sink vanity?
A single sink bathroom vanity can measure between 24 inches and 48 inches in width. Whether you have a small or average bathroom, you can easily fit a 24-inch bathroom vanity. But if your space allows, it is best to upgrade to a midsize (36in or 48in) single sink bathroom vanity for a larger countertop and storage capacity.
How To Choose The Right Bathroom Vanity Size?
Check your floor plan. Refer to your bathroom layout and check for space. Your bathroom vanity should not block your door openings, trims, electrical wires, and other features. Ensure that you have at least 30 inches of clearance space for your vanity’s doors or drawers as well. Finally, it is crucial to locate your vanity near a plumbing system.
How high should a vanity be for a child?
With the existence of step stools and pull-out steps, you can install a 30 inches high vanity in your child’s bathroom instead.
What is a bathroom vanity?
A bathroom vanity comprises a sink and a storage unit to help you organize. Formerly a Victorian-era fixture, vanities have evolved into the modern-day age with a plethora of options. But achieving the right look also requires picking the bathroom vanity size that best fits your bathroom layout.
How wide is a corner bathroom vanity?
Make every inch in your small bathroom count when you install a corner bathroom vanity. This compact vanity can measure between 16 and 36 inches wide and 18 to 24 inches deep.
How tall is a vanity?
The recommended vanity height by the NKBA is from 32 to 34 inches. Traditional homes had lesser floor space and as a result, kids and adults had to share the bathroom. This led to the majority following a standard vanity height of 32 inches.
What does it mean to have two sinks?
Keep in mind that two sinks also mean having two pipes occupying your cabinet and lesser counter space. Consider adding an overhead cabinet or wall shelves if necessary.
