What is difference between counter-depth and cabinet depth refrigerator?
Generally speaking, a kitchen's counters will arrive at around the 25-inch mark when their depth is measured and cabinets are typically 24 to 24 1/2-inches deep. This means that today's standard refrigerators, at approximately 30 inches in depth, will protrude by several inches from the edge of your countertops.
What size is standard depth refrigerator?
35- to 36-inches deepStandard-depth fridges do take up more space than counter-depth models—as mentioned, generally running 35- to 36-inches deep when the doors and handles are included.
What is the difference between standard depth and counter-depth?
2:253:54Counter Depth Refrigerator VS Standard - YouTubeYouTubeStart of suggested clipEnd of suggested clipOkay okay guys let's break down the five key points between the counter depth. And the standardMoreOkay okay guys let's break down the five key points between the counter depth. And the standard depth number one in the counter that being the most popular trending one to use in your kitchen right
Will a 36 inch refrigerator fit in a 36 inch opening?
Yes, it should. Mine measures 35.75" wide.
Does refrigerator depth include doors?
Appliance manufacturers have not standardized how you measure the depth of a refrigerator. The refrigerator's height and width are measured the same, but manufacturers have three ways to do depth measurements: Depth from the back of the fridge to the front of the cooling box - without the door and handles.
How far should a fridge stick out past the counter?
Do Fridges Need Space Around Them? In short, the answer is yes. Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you'll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.
What does cabinet depth refrigerator mean?
Cabinet depth refrigerators are refrigerators that have roughly the same depth as cabinets. Cabinets are normally 24 inches deep or a bit more if the cabinet door is not inset, and countertops are likely to extend an inch beyond the cabinet.
Do counter depth refrigerators have less space?
Because counter-depth fridges are shallower than standard ones, they tend to offer less cubic feet of interior food storage space. Standard fridge/freezer combos average between 22 and 31 cubic feet of space, while baseline counter-depth fridges are between 20 and 23 cubic feet. Shallower depth can be limiting.
What is the most common fridge size?
Standard refrigerator sizes range from around 24 to 40 inches in width, 62 to 72 inches in height and 29 to 36 inches in depth. Generally speaking, french door and side-by-side refrigerators will be larger in width and height, though counter-depth models are frequently available in these two configurations.
What depth is a counter-depth fridge?
around 24-30 inches deepMost counter depth refrigerators, including KitchenAid brand counter depth refrigerators, are around 24-30 inches deep. While shallower than a standard size fridge, it offers a seamless configuration between your kitchen cabinets, without having to remodel.
Which is better counter-depth or standard refrigerator?
A standard depth refrigerator typically ranges anywhere between 22 to 30 cubic feet–again, depending on the brand. So as you can see, while the counter depth refrigerator is more streamlined, the standard depth refrigerator offers more interior space for perishables.
How far should a refrigerator stick out from cabinets?
Your fridge will need about two inches of space away from the wall in the back to allow for air circulation. On the sides, you'll want your fridge to have about 1/8 inch for a standard fridge and about 1 inch on each side for cabinet depth.
How big is a refrigerator?
Although the average size of a refrigerator varies depending on the type of fridge (bottom freezer, top freezer, French door or side-by-side), standard refrigerator dimensions range from 28 ¾ to 39 ¾ inches in width, 61 ¾ to 71 ¼ inches in height and 28 ¾ to 34 ⅝ inches in depth.
How big is a refrigerator bottom freezer?
The average size of a bottom-freezer refrigerator is 29 ½ to 32 ¾ inches in width, 67 to 70 inches in height and 33 ⅜ inches in depth.
How big is a French door refrigerator?
The standard size of a French door refrigerator is 29 ½ to 36 inches in width, 68 ½ to 70 ⅛ inches in height and 29 ⅜ to 34 ⅝ inches in depth.
Where to measure above cutout cabinets?
Cabinets above your cutout? Measure from the floor to the bottom of the cabinets.
How deep is a refrigerator?
Standard refrigerators are typically 32 to 36 inches deep or more, and since countertops are normally about 25 inches deep (24 inches for the base cabinet with a 1-inch overhang) this means that a standard refrigerator will stick out from adjoining countertops by 6 inches or more.
How many cubic feet are counter depth refrigerators?
Pay close attention to capacity. Counter-depth fridges range in capacity from 15 cubic feet to 25 cubic feet. This capacity is what tells you the food-storage capability of the appliance. You may think you are getting a nice, space-saving counter-depth fridge but pay for it dearly by losing total storage capacity. While extra width and height can compensate for the loss in capacity, most counter-depth refrigerators are slightly smaller in capacity than comparable standard models.
How far does a countertop extend?
It is not uncommon for the front edge of a countertop to extend as much as 28 to 30 inches from the back wall. If the cabinetry or countertop has been custom-made, the overall depth can be less or more. So-called counter-depth refrigerators rarely match the countertops exactly.
How deep is a kitchen countertop?
Kitchen countertops can have subtle differences in depth. Base cabinets are typically 24 inches deep, but sometimes they are set slightly forward from the wall to make room for backsplash treatments. And the countertop overhang may add as much as 2 inches on some decorative treatments. It is not uncommon for the front edge of a countertop to extend as much as 28 to 30 inches from the back wall. If the cabinetry or countertop has been custom-made, the overall depth can be less or more.
How tall is a countertop refrigerator?
This often means a wider, taller appliance. These refrigerators can be as much as 72 inches tall, which may interfere with the placement of wall cabinets above the appliance.
What is counter depth refrigerator?
Refrigerators marketed as "counter-depth" are typically side-by-side models that are slightly shallower than standard refrigerators. They maintain ample interior space by also being slightly wider or taller than standard models.
How big is a box with doors?
30 1/8 inches: Box with doors, plus roughly a 1-inch space in back, and about 2 5/8 inches for handles.
What is the Standard Size of a Refrigerator?
Most standard refrigerators have exterior measurements that range from 28 ¾" to 39 ¾" wide, 61 ¾" to 71 ¼" tall, and 28 ¾" to 34 ⅝" deep, though the true standard size depends on the type of refrigerator. There are four common types of refrigerator designs: French door, side-by-side, top freezer, and bottom freezer.
Refrigerator Dimensions By Type
We've outlined the standard sizes for each type of refrigerator – French door, side-by-side, top freezer, and bottom freezer.
Additional Considerations
Before choosing a new refrigerator, there are a few more things to consider in your decision.
What Refrigerator Size Is Right for You?
The simplest approach is to begin by determining the refrigerator-size that would best meet your requirements. A decent rule of thumb is to select a model with a capacity of around 5 cubic- feet for each adult in your home. A refrigerator’s overall capacity includes both the fridge and freezer compartments.
Fridge Size Chart :What Are the Main Standard Fridge Sizes?
The main fridge sizes are based on the main fridge types that such as French- Door fridges, Side by Side fridges, Top-Freezer fridges, and Bottom Freezer fridges. Here is a sample chart;
What Are the Main Types of Fridges?
These refrigerators have some of the broadest shelves available in both the fridge and freezer areas. They’re ideal for keeping large or oddly shaped things like frozen pizzas and deli trays because of this. The frozen food is kept at eye level in a top-freezer refrigerator, while the fresh food is kept below.
Before Buying: Things You Must Do Before Buying a Fridge
Measure the height and breadth of your central doorway, as well as any subsequent passageways, to ensure that the fridge gets to its destination without becoming stuck in tight curves.
Fridge Features
Prioritize the features that are vital to you once you’ve determined your capacity requirements and desired design
Conclusion on the fridge size chart
When buying a new refrigerator, you’ll have many options. Most significantly, you must determine how much capacity you require. Select the design or kind of refrigerator that best suits your budget and preferences. For a more sophisticated aesthetic, consider counter-depth or built-in variations of any of these types.
How deep is a counter depth refrigerator?
In practice, counter-depth refrigerators are likely to measure around 24″ deep not counting the doors, and about 27″ including the door, but not the handle. They look good and fit well into a standard space, only sticking out a bit. In contrast, their big full-depth counterparts could easily extend into the kitchen aisle another 6 or 7 inches.
What brands of refrigerators are cabinet depth?
Most of the major brands such as Frigidaire, GE, Bosch , and Whirlpool offer cabinet depth models. Premium brands such as KitchenAid, Jenn-Air, GE Profile, and Electrolux also offer a wide selection of cabinet-depth refrigerators. Of course, all of them are available for you at Universal Appliance and Kitchen Center (UAKC), Southern California's premier appliance showrooms.
How to use a reefer over a fridge?
Most reefers require a lot of bending to access the lower shelves. Put the reefer on a plinth. Put drawers in the plinth. Size it so that the top shelf in the fridge is at eye level of the person who is the primary user. This will typically be 13 to 16 inches. The plinth should be on rollers so that the whole thing can be pulled out for service access to the back.
Why is a compressor in the top of a refrigerator?
Among other things: Compressor/radiator is in the top to reduce heating the fridge compartment. (Which makes the bottom shelf even lower, hence the support is more desirable.) Separate compressor/cooling circuits for freezer and fridge. Thicker insulation.)
How much more power does a delta T fridge use?
If the cabinet restricts that flow even a bit, the radiator temp can climb 10 degrees or so, which would make the effective delta T 60 degrees - 20% more run time = 20% more power. Plus the fridge is now sitting in a nice blanket of air that is 10 degrees warmer. Which means that it will run 20% more often.
Is 30" a good size fridge?
30" will look fine - in fact, it will look better than 26" as you're hiding more of the ugly fridge. I build mine the depth of the fridge box minus the doors, allowing a little room in the back for the plumbing and electrical. If you can build them tight around the fridge with only the doors protruding past the cabinet, it will look very professional and function as it should.
How wide is a small refrigerator?
Small refrigerators are between about 24″ and 30″ wide. They are generally somewhere between 10 (or a little less) and 20 cubic feet. These fridges are perfect for couples are single people who want a normal fridge.
How big is a standard fridge?
Standard Fridge. A standard fridge is between 20 cubic feet and 25 cubic feet. They are also usually between 30″ and 36″ wide. This is the type of fridge that most people in the United States have in their homes. This is perfect for families of 4 or 5.
What Is The Standard Refrigerator Size?
Let’s get one thing straight. In many cases, the standard size of something and the average size of something is not the same. Nor is it the same as the most common size. For example, the average size of a house varies.
What is the size of a Whirlpool top freezer?
Whirlpool’s top freezer fridges can be slightly smaller at 28 ¾ to 32 ¾ inches in width, 61 ¾ to 66 ¼ inches in height, and 28 ¾ to 34 ½ inches in depth. Top freezers are the classic type of fridge. This is what most people have and with good reason.
What is the average size of a Whirlpool freezer?
The average size for this type of Whirlpool fridge is 29 ½ to 32 ¾ inches in width, 67 to 70 inches in height, and 33 ⅜ inches in depth. Bottom freezers are great if you use your freezer a lot. Kids have easy access and the weight is on the bottom, often in a drawer.
Why is the bottom freezer important?
The bottom weight gives the fridge more balance and makes it easier to reach everything in the back.
How wide is a French door fridge?
A French door fridge is 29 ½ to 36 inches in width, 68 ½ to 70 ⅛ inches in height and 29 ⅜ to 34 ⅝ inches in depth. French door fridges are great for people who want something different. While it doesn’t offer much different in a practical way than the top freezer fridge does, it offers a lot aesthetically.
Depth Dimensions
A standard refrigerator will have a depth measurement of between 30 and 36 inches, which is pretty bulky considering standard kitchen base cabinets are only 24 inches deep.
Width Dimensions
Counter-depth fridges are significantly more shallow than standard fridges, and this might put people off who worry about not having enough storage space in their refrigerator.
Height Dimensions
Another way that counter-depth fridges can make up extra volume is by being taller than usua l. Standard refrigerators typically have height measurements of between 62 and 72 inches, but many counter-depth fridges have extra-tall versions that come in heights of 72 to 80 inches.
Counter-depth Fridge Capacity
The average volume of a counter-depth fridge, as a result of their extended width and height measurements, is around 22 cubic feet. This is similar to the average volume of a standard fridge, which is typically between 22 cubic feet and 30 cubic feet.
Price
You can expect a counter-depth fridge to cost more than a standard fridge, even though it will probably be smaller. This might seem odd, given that smaller items are usually less expensive than larger items.
The Capacity You Need: Refrigerator Size Based On Family Size
As a general rule of thumb, the recommended capacity is 4-7 cubic feet per person in the household.
Will the Refrigerator You Need Fit? Refrigerator Size & Available Space
After you’ve determined the volume size you need, the next step is to check the available space and make sure the model you want to buy will fit.
Standard Refrigerator Sizes By Configuration
The standard fridge size can vary widely depending on the manufacturer, the configuration, and the features.
Power Consumption of Different Sizes of Refrigerators
When you’re trying to figure out what size refrigerator you need, power consumption is another important consideration.
What Size Refrigerator Do You Need? Putting It All Together
As you can see, when it comes to choosing the right size refrigerator, there are several factors to consider.
Dimensions of "Counter-Depth" Refrigerators
Choosing A Counter-Depth Refrigerator
- When choosing a refrigerator to match the depth of cabinets and countertops, keep the following issues in mind: 1. Kitchen countertops can have subtle differences in depth. Base cabinets are typically 24 inches deep, but sometimes they are set slightly forward from the wall to make room for backsplash treatments. And the countertop overhangmay add as much as 2 inches on some …
Interpreting Dimensions
- Most countertop-depth refrigerators will specify several depth dimensions, which you can interpret in whatever way fits your needs. For example, one KitchenAid counter-depth side by side refrigerator (model KSBP25IN) lists three different depth measurements: 1. 24 inches: Box itself, nothing else. No doors, no handles. No recommended 1-inch space behind the fridge to accoun…
Other Considerations
- To maintain the inner capacity, countertop-depth refrigerators must make up the shallower depth with larger dimensions elsewhere. This often means a wider, taller appliance. These refrigerators can be as much as 72 inches tall, which may interfere with the placement of wall cabinets above the appliance. Use the specified dimensionsto determine if the appliance is truly a counter-dept…
Bottom Line
- A counter-depth refrigerator is a good choice where you want to preserve a built-in look in your kitchen by keeping the appliances in-line with the surrounding cabinetry. But you need to understand how manufacturers specify the appliance dimensions and make sure to choose a refrigerator that will create the effect you want. Counter-depth refrigerators are often wider and t…