A good pump between 3,000 and 8,000 CFM at 115 volts should be able to handle regular medium-large swamp coolers and offer the speed that’s required. Just be sure to calculate the size using the formula provided above. A larger pump may also put too much pressure on the fan and cause an irregular flow of water to the pads.
Full Answer
What size evaporative cooler pump do I need for a swamp cooler?
This means a 6,000 CFM evaporative cooler pump should work for your swamp cooler. This is the formula you should use no matter the size of your room. Just multiply the sum by the ceiling’s footage and divide the result by two.
What are the parts of a swamp cooler?
A swamp cooler is made up of A motor, Shaft bearings, A motor pulley, blower pulley, V-belt, water pump, drain and an overflow valve. If playback doesn't begin shortly, try restarting your device. Videos you watch may be added to the TV's watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
How much power does an evaporative cooler use?
Evaporative cooler motors are relatively small in size, usually ranging from 1/3 to 1 horsepower. Most operate on 115/120 volts of power, which is the reason they use relatively little electricity when compared to 240-volt central air conditioning systems.
What kind of pulley do I need for a swamp cooler?
As with the motor pulley, the blower pulley must be the correct size to ensure that the swamp cooler works correctly. When replacing a blower pulley, make sure to match the pulley to the unit, so that the blower can move enough air to cool effectively. The V-belt is a long-lasting type of drive belt.
How big of a swamp cooler pump do I need?
"In order to determine the right swamp cooler pump for your house, or your room, you simply need to find the total cubic feet and divide by two. If you have a room that is 1,500 square feet, and with 8 foot ceilings you would multiply those together for 12,000 total cubic feet.
Can I put a larger motor in my evaporative cooler?
A: The motor pulley must be the same size and type recommended by cooler manufacturer. Do not use a larger pulley size which will “overload” a motor and cause it to cycle on and off. Recommended motor pulley sizes for 3/4 HP motors like the 2206 are: 3-3/4" adjustable -or- 3" to 3-1/4" fixed with ½" bore.
How much is a new motor for a swamp cooler?
$50 to $600Swamp Cooler Motor Replacement A motor replacement costs anywhere from $50 to $600. Larger, more specialized, systems require more expensive motors.
How many watts does it take to run a swamp cooler?
How much energy does an evaporative cooler use? Power use is generally low (200 to 400 watts) because only the fan and water pump use energy. But this can vary widely depending on features and capacity, and there are domestic units that draw up to 2kW or more.
How can I speed up my swamp cooler?
How to Optimize Airflow in Your Home Swamp Cooler EfficiencyRun the Pump Before Cooling Off. ... Test Relief Airflow. ... Close Doors to Rooms Not in Use. ... Check Humidity Outside and Inside. ... Listen to Your Cooling System. ... Make Sure Your Cooler Is in Top Shape.
Which cooler motor is best?
Nimble Cooler motor is best for your cooler. It comes with 100% Fresh copper and in cell cover which is best for motor. Its compatible with all cooler. This motor can runs normally on Inverter also, its with Double ball bearing, its is of 105 watts with 1400 rpm high speed.
How do you fix a swamp cooler motor?
0:238:32Repair a Swamp Cooler that Shuts Down, Very Easy! - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd see what's going on - two Phillips screws. So there's the clamps there you can see where theMoreAnd see what's going on - two Phillips screws. So there's the clamps there you can see where the Phillips screwed is took it out and the clamps just come right off the little hook.
Which is cheaper swamp cooler or AC?
Swamp coolers generally are cheaper to install and use less electricity than air conditioning. They also perform the same job as humidifiers. These are the primary reasons so many people love them.
How do you install a swamp cooler motor?
3:455:38Swamp Cooler Motor Replacement - YouTubeYouTubeStart of suggested clipEnd of suggested clipWith a motor centered in the grooves I'll take the adjustable clamps and slide the slot on each endMoreWith a motor centered in the grooves I'll take the adjustable clamps and slide the slot on each end of the clamps over the tapered edges on the motor brackets. Then tighten the clamps.
How many amps does a swamp cooler pull?
A swamp cooler needs a certain amount of electricity to do its job. It draws that amount from the voltage supply of a power line, but the actual amount taken is called AMPERES or "AMPS". Bigger, stronger coolers need more -- perhaps up to 15 amps. Smaller coolers need less than 1 amp.
Does a swamp cooler use more electricity than a fan?
Overall swamp coolers have been found to be far more energy efficient for home cooling. Swamp coolers will use 15% to 35% of the energy that most traditional AC units would use. They also do not require any chemicals in the way that traditional AC does.
Is it OK to run a swamp cooler 24 7?
A swamp cooler can be in operation for 24 hours of the day, but you will need to ensure it has enough water. Continuous flow coolers will automatically work and will be fine to run all day. Manual swamp coolers require you to add water to the reservoir and change the settings so it will run all day efficiently.
How big of an evaporative cooler do I need?
Sizing an Evaporative Cooler Here are two rules of thumb that can help you size an evaporative cooler: If you multiply the square footage of a space by the ceiling height and then divide by two, that will give you the cfm rating necessary for 30 air changes per hour.
How does a swampy work?
A swamp cooler uses moisture to cool air. A swamp cooler (which is also called an evaporative air conditioner) works by taking warm outside air through wet evaporative cooler pads, effectively cooling the air.
How to determine the size of swamp cooler?
In order to determine the right swamp cooler pump for your house, or your room, you simply need to find the total cubic feet and divide by two. If you have a room that is 1,500 square feet, and with 8 foot ceilings you would multiply those together for 12,000 total cubic feet. Divide that by two and you are left with 6,000 FCM. The size of the pump needs to be able to handle that much volume.
What is swamp cooler pump?
The pump is the part of the swamp cooler that actually circulates the water and gives it the volume that it needs.
Why is my swamp cooler not cooling down?
Not Cooling Things Down Enough. If you notice that the swamp cooler is working extra hard, but the room is not feeling any cooler it could one of two things. First, it might be too humid in order for the unit to work right. Or, the pump is not large enough for the room.
What does CFM stand for in a swamp cooler?
This stands for Cubic Feet per Minute that the cooler is blowing into the home. Knowing the CFM will help you determine if the pump is large enough.
What is swamp cooler?
An evaporative cooler , also known as a swamp cooler, is an eco-friendly, cost-effective alternative to traditional AC systems. However, there are some things you must keep in mind when considering purchasing one of these units, such as how to determine the size evaporative air cooler you need for your space. How to Decide What Size Air Cooler ...
How many CFM should an evaporative cooler have?
In order to ensure that your evaporative cooler is effective, it should have a rating of at least 1,800 CFM. In addition to size, there are some other factors that you need to consider when choosing an evaporative cooler. We’ll explore them below.
How does an evaporative air cooler work?
A traditional air conditioning system uses refrigerants to cool the area, which are harmful, but an evaporative air cooler uses a natural process that cools your area with water. This process doesn’t add pollutants or other harmful chemicals to the environment.
How much does it cost to run an air conditioner?
In fact, it should cost you less than $1 to run a 36-inch evaporative air cooler for 8 hours because the only associated costs are electricity and water.
Is an evaporative air cooler good for the environment?
For those consumers who are concerned about the environment, an evaporative air cooler is a great way to keep your space cool without causing harm to the environment.
What is the pulley on a swamp cooler?
As with the motor pulley, the blower pulley must be the correct size to ensure that the swamp cooler works correctly. When replacing a blower pulley, make sure to match the pulley to the unit, so that the blower can move enough air to cool effectively.
How much power does an evaporative cooler use?
Evaporative cooler motors are relatively small in size, usually ranging from 1/3 to 1 horsepower. Most operate on 115/120 volts of power, which is the reason they use relatively little electricity when compared to 240-volt central air conditioning systems. The motors on evaporative coolers usually work fine until they don't—they don't gradually ...
What are the pads on a water cooler?
The pads are where the air cooling occurs, as water delivered to the pads by the water pump evaporates under the air blown through the pads by the cooler motor. Pads for evaporative coolers come in many types, including foamed polyester, slit expanded paper, and wood strips. The most common and cheapest cooler pads are the ones made from wood strips. These pads work well, but if the strips get loose, they can clog up the pump, so placing an extra screen around the pump can be a good idea.
What is the water pump in an evaporative cooler?
The water pump in an evaporative cooler brings the water from the pan to the distribution tubing, and from there onto the pads. The evaporation of water from the pads is what allows the appliance to cool the air, so if the pads are not being saturated with water, the pump may need to be replaced. If the pump is operating correctly ...
Why do we need an evaporative cooler?
The parts of an evaporative cooler are all designed to facilitate efficient evaporation of water and circulation of the cooled air into the home. Knowing about the various parts of the appliance can make it easier to maintain and repair your cooler.
What is the spider in a water pump?
The distribution tubing , commonly called the spider, distributes the water from the pump to the cooler pads. The tubing can sometimes get clogged, and it may require cleaning or even replacement if you're not getting enough water out of it. It is a good idea to check the distribution tubing regularly, especially if the air doesn’t seem cool enough.
Can you change the motor in an evaporative cooler?
If you are changing the motor in an evaporative cooler, make sure you examine the current motor to see what size it is and how many speeds it has. Changing the motor on a cooler is not a difficult project, but it does require some basic electrical know-how to connect the wires.
What is swamp cooler?
May 01, 2019. For those living in hot, dry areas, a swamp cooler can provide effective and energy-efficient cooling. These devices lower temperatures by combining the natural of evaporation with a simple air-moving system.
Which region is better for swamp cooler?
To an extent, region B would also benefit from a swamp cooler (though the cooling capacity will be lower), but if you live in region C, a portable air conditioner will be better suited for your needs. The next step to choosing an evaporative cooler is to find a correctly sized unit. Like air conditioners, evaporative coolers need to be ...
What is portable evaporative cooler?
Always keep in mind that portable evaporative coolers are meant for personal and spot cooling. For lowering the temperatures in larger, non-residential settings such as warehouses or garages, look to commercial evaporative coolers. Browse Evaporative Coolers. Shop Now.
Do swamp coolers need fresh air?
However, as long as your environment fits the above criteria, a swamp cooler can help you stay cool and comfortable in the summer heat.
Can you burn cigars with a swamp cooler?
Swamp Cooler Buying Tip. A higher RH will soften your cigars and can cause burn problems. A lower RH will make your cigars will feel a bit firmer. Be careful, too low of a temperature and humidity will eventually ruin your cigars with them be too dry and even cause tobacco beetles.
Can a portable air conditioner cycle off too quickly?
Furthermore, a portable air conditioner with too many BTUs will cycle off too quickly, and a unit without an insufficient number of BTUs will not adequately cool a room. However, unlike air conditioners which rely on BTUs as a means of measuring cooling efficiency, the output of evaporative coolers is rated by CFMs.