What size trowel is best?
Apr 02, 2020 · Cut KERDI to size prior to application. 2. Apply thin-set mortar to the substrate using a 1/4" x 3/16" (6 x 5 mm) V-notched trowel or the KERDI-TROWEL, which features a 1/8" x 1/8" (3 x 3 mm) square-notched design (Note the open time of the mortar).
How to install Kerdi membrane?
Feb 08, 2022 · What size notched trowel for Kerdi? A 1/4″ x 3/16″ (6 mm x 5 mm) V-notched trowel or the Schluter™-KERDI-TROWEL is recommended.
What size trowel for 12x24 floor tile?
Beside this, what size notched trowel for Kerdi membrane? Cut KERDI to size prior to application. 2. Apply thin-set mortar to the substrate using a 1/4" x 3/16" (6 x 5 mm) V-notched trowel or the KERDI-TROWEL, which features a 1/8" x 1/8" (3 x 3 mm) square-notched design (Note the open time of the mortar).
How do you mix thinset for Kerdi membrane?
DITRA-TROWEL features a 11/64" x 11/64" (4.5 mm x 4.5 mm) square notch; KERDI-TROWEL features a 1/8" x 1/8" (3 mm x 3 mm) square notch; DITRA-HEAT/-DITRA-XL-TROWEL features a 1/4" x 1/4" (6 mm x 6 mm) square notch
What size trowel do you use for KERDI membrane?
A 1/4" x 3/16" (6 mm x 5 mm) V-notched trowel or the Schluter™-KERDI-TROWEL is recommended.
What is the best thinset to use for KERDI-BOARD?
Schluter's recommendation is to use unmodified thinset mortar when installing Kerdi over most shower substrates.
What size trowel do I use for Schluter DITRA?
For DITRA use a 1/4" x 3/16" (6 mm x 5 mm) V-notched trowel, 5/16" x 5/16" (8 mm x 8 mm) V-notched trowel, or the DITRA trowel, which features an 11/64" x 11/64" (4.5 mm x 4.5 mm) square-notched design, is recommended.
Can I use modified thinset over Kerdi?
In general, modified thin-set mortar is not recommended to set ceramic and stone tile, including large format tiles, over the KERDI membrane. Modified thin-set mortars must dry for the polymers to coalesce and form a hard film in order to gain strength.
What mortar do you use for Schluter?
Schluter-Systems requires the use of Schluter SET™ , ALL-SET™ , FAST-SET™, or an unmodified thin-set mortar meeting the requirements of ANSI A118. 1 to install ceramic. (including porcelain) and stone tile over DITRA and DITRA-XL.
How long should Kerdi dry before tiling?
24 hoursWait 24 hours after the membrane (i.e., Schluter®-KERDI-BAND and Schluter®-KERDI) installation is complete to allow for the final set of the mortar and to ensure waterproof performance of the assembly at seams and connections before water testing.
What size notched trowel for tile?
All tile manufacturers offer a recommended trowel size. Mosaic installations up to 2 inches can use a 1/8-inch notch, as can wall tiles of up to 4 inches, as a general rule. 16-inch tiles need a 1/2-inch-deep notch, and anything over 24 inches should use a 3/4-inch notch.
What size notched trowel for 12x12 tile?
Floor tiles measuring 12 by 12 inches are considered standard, requiring a notched trowel size of either 1/4 inch by 3/8 inch or 1/2 inch by 1/2 inch.
What size notched trowel for subway tile?
1/4'' x 3/8'' square notch: this trowel size is good for 8'' x 8'' tiles, some builder grade tiles, and bigger subway tiles (around 4'' x 12'').Jun 27, 2016
How do you mix thinset for Kerdi membrane?
1:174:37How to Mix Schluter® Thin-Set Mortars - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd then begin mixing. For all three thin sets mix at a slow speed at less than 300 rpms for 5MoreAnd then begin mixing. For all three thin sets mix at a slow speed at less than 300 rpms for 5 minutes. The mortar may appear dry at first.
What type of thinset should I use for shower tile?
0:292:18Choosing the Right Mortar for Tile Setting - YouTubeYouTubeStart of suggested clipEnd of suggested clipSo we recommend using glass tile premium thin set mortar it.MoreSo we recommend using glass tile premium thin set mortar it.
Can I use Schluter all set for Kerdi band?
Schluter ALL-SET® is suitable for use with ceramic, porcelain, and stone tile, including large and heavy tile, in conjunction with Schluter®-Systems' uncoupling and waterproofing membranes (e.g., DITRA, DITRA-HEAT, KERDI, etc.), the Schluter®-Shower System, and KERDI-BOARD.
What size notched trowel for 300x300 floor tiles?
But as grumpy say’s match the trowel size to the tile size ie- if you are setting tiles larger then 300×300 then the minimum trowel size you will use is 10mm no matter how good the walls are.
Which Thinset for Kerdi?
Unmodified thin-set mortar is recommended to set ceramic and stone tile, including large format tiles, over the KERDI membrane. Portland cement-based unmodified thin-set mortars are dependent on the presence of moisture for hydration in order to gain strength.
How thick is Kerdi membrane?
KERDI is 8-mil thick and has a water vapor permeance of 0.90 perms, when tested according to ASTM E96, using Procedure E at 90% relative humidity. KERDI-DS is 20-mil thick and features additives to produce a water vapor permeance of 0.18 perms.
What is the best waterproofing membrane for showers?
Paint On Liquid Waterproofing Membranes Redgard Waterproofing Membrane by Custom Building Products: As I have already mentioned, Redgard is the most popular and the most talked about liquid waterproofing membrane out there. Mapei Mapelastic Aquadefense: Laticrete Hydro Ban:
How do you install Kerdi waterproof membrane?
How to Install Shluter Kerdi in a Shower Plan out and cut the Kerdi. Mix unmodified thinset mortar to a fairly fluid consistency. Apply thinset. Attach Kerdi to the walls. Apply thinset and Kerdi to the shower floor. Cover all corners. Apply seals around shower components. Let the thinset dry.
Can you put Kerdi membrane over painted drywall?
There are one or two code inspectors here who will say: no, that you can only put Kerdi or a waterproofing membrane over cement board in a wet area inside. Schluter says you can put Kerdi over drywall – in fact encourage it.
What size tile spacers should I use?
The general rule is to use tile spacers of 2 – 3mm for a ceramic wall tile installation and tile spacers of 5mm for a ceramic floor tile installation, but there are numerous factors that can influence the size of the tile spacers you use. Porcelain, granite and marble tiles are generally installed with a 3mm spacer.
What is a Euro trowel?
The Euro notched trowel is an innovation that is designed to collapse the ridges in the mortar in a more efficient way. This type of trowel will often be specified when installing the really large thin porcelain tile panels that are becoming more popular today. See trowel at Amazon.
What is a trowel used for?
This trowel is used for some thin waterproof membranes. Additionally, certain uncoupling membranes are installed with this size trowel. Again, you’ll need to check what the manufacturer requires for the particular membrane that you are using.
How big is a mosaic tile?
Certain glass mosaic tiles such as the mixed linear glass mosaic tiles that you see in the video. Subway tile and other ceramic tiles up to 6×6 inches square. Pebble tile. As well as other applications. See trowel at Amazon.
Product Overview
The Schluter Kerdi Trowel is suited for use with Kerdi Membrane. It features a 1/8 in. x 1/8 in. square notch. This trowel is designed to be used with thinset.
Info & Guides
You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
