What Sizes Does a Circular Saw Come in?
- The Blue Collar Saw The most widely used circular saw is the 7 1/4 inch, but most refer to this saw as the 7 1/2-inch saw. ...
- A Small World After All Smaller circular saws include the 3 1/4 and 4 1/4 inch, typically known as the 3 1/2 and 4 1/2 by professionals. ...
- Beauty and the Beast ...
- Safety and Other Features. ...
- Coming Attractions ...
What is the most common circular saw blade size?
- Circular saw diameter – Make sure you fit the right size blade for your saw
- Number of teeth – Saw blades with a low number of teeth, 24T or less are for quick rough cuts, blades with a high number or teeth 40T or more ...
- Arbor size – Choose a blade with a bore diameter that fits your saw’s arbor most common is 16mm (5/8″)
What is the best compact circular saw?
- BEST OVERALL: TACKLIFE Circular Saw with Metal Handle, 6 Blades
- RUNNER-UP: Rockwell 4-1/2” Compact Circular Saw
- BEST BANG FOR THE BUCK: Makita SH02R1 12V Max CXT Lithium-Ion Cordless
- BEST SIDEWINDER: SKILSAW Southpaw SPT67M8-01 15 Amp 7-1/4 Inch
- BEST WORM DRIVE: SKILSAW SPT77W-01 15-Amp 7-1/4-Inch Aluminum Worm
What sizes does a circular saw come in?
The most common sizes of circular saws are 190mm (7 1/4″) diameter and 165mm (6 1/2″) diameter. Circular saw sizes are determined by the blade diameter, and saws range from 85mm (3 11/64″) diameter up to 355mm (14″). 165mm circular saws can cut up to 61mm (2 13/32″) deep and 190mm saws cut up to 70mm (2 3/4″) deep.
What circular saw should I buy?
What Circular Saw Should I Buy?
- #Power Source. ...
- #Mechanical Style: We can notice two types of mechanical styles for a circular saw in the market, sidewinders and worm-drive.
- #Power Rating. ...
- #Blade Size. ...
- #Ergonomics. ...
- Conclusion: Hopefully, today’s guide was enough for you to explain this topic in a very good way. ...
What are the different sizes of circular saw?
Cordless saws typically range in size from 5-3/8 to 6-1/2 inches. Corded circular saws don't depend on batteries for power and are better suited for tough cutting jobs, such as masonry, steel and continuous woodcutting. Corded saws are available in many sizes; the most common is 7-1/4 inches.
What size is a regular circular saw?
7 1/4 inchesBlade Size The most common and useful size for DIYers is 7 1/4 inches. Saws this size will cut through material more than 3-inches thick, and they also offer the widest variety of blade choices for cutting substances other than wood.
What can a 6.5 circular saw cut?
The 6.5 will cut up to 2 1/16”, while the 7 ¼” cuts up to 2 ⅜”. Minor sure, but it's when you tilt them into 45 degree angles, that the 7 ¼” can do something the 6.5 can't. Cut through a 2×4. Of course more capacity, typically means more weight.
How do I know which circular saw to buy?
The main things you should be looking out for when choosing a circular saw are cutting capacity, cutting depth and bevels. The capacity and depth of your cut with a circular saw is based on the size of the saw's blade.
What size circular saw Do I need to cut 2x4?
You can use the standard 5 ½″ circular saw to cut 2x4s. Mark your cutline on both sides and make the cut on the first side. Reverse the 2×4 and pass the blade through the marking to finish the cut.
What is a 60 tooth saw blade used for?
60-Tooth blade produces a remarkably clean, chip-free cut that requires little to no sanding. Ideal for crosscutting oak, pine, melamine, veneer plywood and delicate molding.
What is the most popular size circular saw?
The most widely used circular saw is the 7 1/4 inch, but most refer to this saw as the 7 1/2-inch saw. If you have questions about it, either blade works. Look for the blade's diameter on the side of the blade. This all-purpose saw works well for cutting 3/4-inch thick plywood or lumber.
How deep can a 7.5 circular saw cut?
Circular Saw Sizes Standard-size saws use 7 1/4-inch blades and can cut a maximum depth of about 2 1/2 inches.
How deep can a 5.5 circular saw cut?
How Deep Can a Circular Saw Cut?Saw SizeMax. Depth at 90°Cut Depth at 45°5 ½ inch Saw1 ¾ inch1 3/16 inches6 ½ inch Saw2 13/32″1 11/16″7 ¼ inch Saw2 ½ inches1 13/16 inch8 ¼ inch Saw2 7/8″2 ¼″1 more row•Jun 20, 2021
How long do circular saws last?
They can last between 12 and 120 hours of continuous use, depending on the quality of the blade and material they're used to cut.
Does circular saw size matter?
The Size: Circular Saw Blade Diameter Most woodworkers identify a circular saw by the size of the saw blade it uses. Hobbyists should consider one of these sizes: 6.5-inch: While there are smaller saws, this is the minimum you should go for in woodworking. Your cutting depth will be about 2.25-inches.
Can a 6 1 2 circular saw cut a 4x4?
Like miter saws that measure less than 12 inches, a circular saw's 6.5-inch or 7.25-inch blade will not cut cleanly through a 4×4. The maximum depth of most circular saws is just 2.5 inches. This means you'll need to make two cuts. Having to make two cuts makes it easier to set up the cut.
Can a 6 1 2 circular saw cut a 4x4?
Like miter saws that measure less than 12 inches, a circular saw's 6.5-inch or 7.25-inch blade will not cut cleanly through a 4×4. The maximum depth of most circular saws is just 2.5 inches. This means you'll need to make two cuts. Having to make two cuts makes it easier to set up the cut.
How thick of wood can a 6 1 2 circular saw cut?
Depth. A 6 ½ circular saw can cut materials up to 2.5 inches. It's perfect for cutting small materials for a small DIY project. Moreover, working with a 6 ½ saw feels comfortable on the hands and won't leave you feeling fatigued right after.
How deep is a 71 4 circular saw?
With a 13-amp motor and 20 tooth carbide-tipped blade, this saw is ready for any job. With a 2-7/16 in. depth of cut at 0 degrees, 1-7/8 in. depth of cut at 45 degrees and 1-11/16 in.
What is the best circular saw for wood trim?
Smaller circular saws include the 3 1/4 and 4 1/4 inch, typically known as the 3 1/2 and 4 1/2 by professionals. These smaller saws -- including cordless ones -- work best for cutting lighter pieces of wood trim, molding, plywood and lumber no thicker than about 1/2 inch . These smaller saws make cutting 1/4-inch paneling, or any composite material such as backer board, hardboard and light, insulation panels a snap. They also cut more accurately without the chipping associated with the bigger 6 and 7 1/2-inch saws. Small-profile circular saws make cutting in confined spaces much easier because of their smaller size and weight and their maneuverability when compared to their bigger counterparts.
How to choose a circular saw?
This handy spring-loaded device hides and protects the blade when not in use. It retracts when you operate the saw and folds down over the blade after completing the cut. Your saw should have a locking depth gauge for the blade and a tilting base that allows you to cut angles. Some of the smaller saws may not have the tilting feature, and you may not need it, but opt for that feature, if possible.
What is a small profile circular saw?
They also cut more accurately without the chipping associated with the bigger 6 and 7 1/2-inch saws. Small-profile circular saws make cutting in confined spaces much easier because of their smaller size and weight and their maneuverability when compared to their bigger counterparts.
How big is a Beauty and the Beast circular saw?
Beauty and the Beast. Large circular saws range from 8 1/4 inches to over 10 1/4 inches by blade size. These bigger saws are beasts, relying on powerful motors to cut through 2-inch thick material with ease. They are heavy and intimidating.
What is the best circular saw for 3/4" plywood?
The Blue Collar Saw. The most widely used circular saw is the 7 1/4 inch, but most refer to this saw as the 7 1/2-inch saw. If you have questions about it, either blade works. Look for the blade's diameter on the side of the blade. This all-purpose saw works well for cutting 3/4-inch thick plywood or lumber.
What is a worm drive saw?
Worm-drive saws work best for those with jobs as builders for industrial use. With a motor positioned at 90 degrees to the blade, the gearing powers the saw, giving it more torque. These babies are heavy, but remain the most powerful circular saws available.
Do circular saws have a blade guard?
Do not buy a circular saw without a retractable blade guard. This handy spring-loaded device hides and protects the blade when not in use. It retracts when you operate the saw and folds down over the blade after completing the cut.
What size circular saw will cut a 4×4?
The best way to cut a 4×4 post is by using a 12-inch miter saw, 10-inch radial arm saw, both of which can cut completely through a post in one pass, or a standard circular saw that can make precise cuts in two passes with the help of a simple jig.
What are the 2 types of circular saws?
A1: There are two basic types of circular saws: the worm drive saw, which can be identified by its rear-mounted motor, and the sidewinder, so named because its motor is positioned alongside the blade.
How deep does a six and a half inch circular saw cut?
At a 45 degree angle this saw can cut 1-7/8″ deep which is needed when cutting things like rafters that require cutting though conventional 1-1/2″ thick framing lumber.
What is Arbor size on a circular saw?
As the scale increases or decreases, the arbor hole generally follows suit. For standard 8″ and 10″ blades, arbor hole diameters typically sit at 5/8″.
What is the power supply for a circular saw?
The most common power supply for circular saws is corded 120v or 230v for DIY or home use. This is closely followed by 18v for Cordless units. Circular saws used in industry are generally 110v or cordless for safety reasons.
What is the diameter of a circular saw?
The most common sizes of circular saws are 190mm (7 1/4″) diameter and 165mm (6 1/2″) diameter. Circular saw sizes are determined by the blade diameter, and saws range from 85mm (3 11/64″) diameter up to 355mm (14″). 165mm circular saws can cut up to 61mm (2 13/32″) deep and 190mm saws cut up to 70mm (2 3/4″) deep.
What voltage is a Dewalt tool?
With the recent advancement in battery technology, with the likes of Hikoki’s Multi-Volt 18v or 36V tools and DeWalt’s FLEXVOLT 20v – 60v power supplies, the gap between using corded tools for sustained heavy-duty use has been significantly reduced.
How deep can a 165mm blade cut?
The smaller 165mm (6 1/2″) blade size will allow you to make cuts up to 61.0mm (2 9/16″) deep, which means you can cut through a wide variety of lumber sizes or board thicknesses.
How to tell how long a cordless battery lasts?
When choosing a cordless power supply look for the ‘Ah’ rating on the battery, this will give you the Amp-Hours which tells you roughly how long the battery should last from fully charged.
What are the different types of circular saws?
Circular saws are available in two different drive types, these are Worm-drive and Side-winder.
How many amps should I use for a circular saw?
I would recommend looking at circular saws with at least 1200W or 10 amps for general DIY use and over 1500W or 12.5 amps for heavy-duty or prolonged work otherwise, you will find the saw doesn’t live up to your expectations or have enough power to do the job needed.
What size blade do you need for a circular saw?
Circular saws are versatile tools, but you wouldn’t really want to work on any piece of wood that needs a 10 inch or 12 inch blade to cut through it. This means that you’ll have to exert much more pressure and control over the saw and chances are the feedback from the wood will be too tough to handle.
How many teeth does a combination blade have?
Combination blades also come with a higher tooth count, up to 80 teeth on some of the larger blades.
What is a spindle lock?
Spindle lock for easy blade changes. There is also a third type of circular saw blade which is for general use. This is known as a combination blade as it has features of both rip and crosscut blades and can handle both types of cuts.
What is a 10 inch blade?
10 inch blades will let you tackle a wide variety of projects. They are sought after by woodworkers that work on large projects or want to also be able to cut tiles or metal.
What to know when buying a circular saw blade?
First, you have to make sure the arbor on your saw can support the new blade. Also, you have to know what type of material you plan on working with the most: wood, aluminum, plexiglass, sheet metal, etc.
Can you use a dado blade on a circular saw?
These are called specialty blades. In the same category, you can find dado blades even though they’re not your most common choice for handheld circular saws. Even so, certain models will support a stacked dado set. Wobble dado blades usually aren’ t compatible with circular saws, nor are they recommended as the vibrations they create make it hard to control the saw.
Do you need a circular saw blade guide?
Spread the love. Most amateur carpenters or hobbyists worry a lot about size and not enough about blade design and purpose. This is why you need a circular saw blade size guide. The good news is that not all guides are minimalistic. Even if the blade size may seem low on the list of concerns for professionals, there are important connections ...
What is the power rating of a circular saw?
For corded circular saws, the power rating is generally expressed in amperage. Today, 15-amp saws are the standard; 10- or 12-amp saws are appropriate only for infrequent use. The price difference just isn't that significant for a purchase you can expect to use for many years. The higher the amperage, the more cutting power the saw will have.
What is circular saw?
Circular saws have long been available in two styles: sidewinders and worm-drive. Sidewinders are the most recognizable style to most of us. The handle is set higher over the blade, and the blade has traditionally been located on the right side of the D-shaped handle, although left-handed saws are increasingly available.
How long will a portable circular saw last?
Buy a good circular saw now and you can expect to still be using it in 10 or 20 years. Here are seven things to keep in mind when you shop for your circular saw. Elena Pejchinova/Moment/Getty Images.
What kind of battery does a cordless saw use?
Virtually all cordless saws now use lithium-ion battery systems. There are many 18-volt saws available, but there are also more powerful 20-volt cordless saws offered. As well as voltage, an amp-hour rating will also be listed, which indicates how long you can use the saw before the battery dies.
What makes a circular saw more comfortable?
A well-shaped handle and good balance can go a long way toward making a saw more comfortable and efficient to use, so don't overlook these features when choosing a circular saw.
What is a saw foot made of?
Saw foot made from cast magnesium rather than pressed steel. Power brake to stop the blade quickly. Preset bevel stops on the saw foot (22 1/2 and 45 degrees are most useful) A spindle lock to simplify changing blades. Built-in work lights to illuminate the workpiece. Laser guideline to help keep saw aligned.
Do cordless circular saws use the same batteries?
Many tool manufacturers now offer sets of power tools that use the same batteries, and if you already own several tools by one manufacturer, adding a cordless circular saw that uses the same batteries is an affordable option.
Why Is Circular Saw Must Have For Every Craftsman And DIY Enthusiast?
Every craftsman, whether you’re a professional, or just someone who prefers to handle many home projects on your own, there is a constant need to cut things.
How were logs sawn before circular saws?
Before circular saws came into being, logs were sawn by hand using a either a pit saw, or powered saws using an up-and-down saw involving a reciprocating motion. Although effective, these saws were not nearly as efficient as they should be for the type of work. On the video below you can found one example of this historic circular saws.
What is the most useful power tool?
As one of the most useful and versatile power tools, a circular saw is one of the most important purchases you can make. Ready to move towards picking out your new circular saw? Be sure to check out our buying guide for the best circular saws available for a variety of budgets, and also our in-depth product reviews as well.
Which is more convenient, a cordless circular saw or a power saw?
Cordless circular saws are obviously the most convenient, as they don’t require you to stay around a power source.
Where is the blade on a circular saw?
The majority of circular saws are sidewinders, so the blade is mounted on the right-hand side of the saw’s motor. If you’re right-handed, you will need to lean over the saw to be able to see the cut line.
What is a circular saw?
By its most simple definition, a circular saw is any power-saw that utilizes a toothed or abrasive disc/blade that is able to cut by using a rotary motion that spins around an arbor. The concept is simple in nature, but there are a lot of moving parts involved within.
Why is a circular saw called a buzzsaw?
The sound of the circular saw earned it the nickname buzz-saw do to the constant buzzing sound it made while cutting through wood.
Circular Saw Blade Types
Each type of circular saw blade is designed to cut different materials and work with specific power saws. Be certain the blade you choose is suitable for the material you need to cut and that it fits your saw. There are several specifications you need to consider.
Standard Circular Saw Blades
Standard circular saw blades are typically used to cut wood or wood composites. The number of teeth on the blade helps determine the speed, type and finish of the cut. Blades with fewer teeth cut faster, but those with more teeth create a finer finish. Gullets between the teeth remove chips from the work pieces.
Continuous-Rim Blades
Continuous-rim blades are a type of diamond-edged blade (sometimes called diamond blades) designed for use on materials like tile and slate. Diamonds affixed to the edge of the blade cut through the material. These blades create a very clean finish.
Turbo-Rim Blades
Turbo-rim blades are diamond blades similar to continuous-rim blades but have a serrated rim that cuts materials like brick and concrete. These blades cut more aggressively than continuous-rim blades but don't leave as clean of a finish. Some work for dry-cutting only, while some are appropriate for both wet and dry applications.
Segmented Blades
Segmented blades also cut with diamond edges but have a rim divided by gullets similar to those on a standard blade. The segments create the most aggressive cut of the diamond blades. These blades cut more quickly than the other types and can handle tough materials, like brick and concrete, but leave a rougher finish.
Abrasive Blades
Abrasive blades can cut materials like brick and concrete. Some abrasive blades are suitable as a metal-cutting circular saw blade. Like the diamond blades, they don't have teeth. They cut with an abrasive material like aluminum oxide or silicon carbide.
Stacked Dado Blades
Stacked dado blade sets are wood-cutting accessories that include two circular saw blades as well as several chipper blades and shims. By stacking the blades or combining blades, chippers and shims, you can cut grooves of different widths. These sets aren't for use with handheld saws; they're designed for table saws.