What Size Is a Single Pocket Door?
| Pocket Door Size | Overall Dimensions | Passage Dimensions | Door Panel |
| Small | 51.75 by 82.25 inches | 23.625 by 78.75 inches | 24 inches |
| Medium | 59.625 by 82.25 inches | 27 by 78.75 inches | 28 inches |
| Large | 75.375 by 82.25 inches | 35 by 78.75 inches | 36 inches |
| Extra-Large | 81.83 by 82.25 inches | 37.375 by 78.75 inches | 38 inches |
How thick should a wall be for a pocket door?
What is the best pocket door hardware?
- Best Ball Bearing Hanger - Johnson Hardware 1125.
- Best Pocket Door Track - Hartford Building Products HBP-S1.
- Best Pocket Sliding Door Bolt - Ives by Schlage 42B15.
- Best Pocket Door Handle And Pull - Prime-Line Products N 7238.
- Best Pocket Door Edge Pull - Baldwin Estate 0465.150.
- Best Flush Pull Handle - Tibres - 17.1.
What is the standard size of a pocket door?
Standard pocket doors typically come in the same sizes as regular hinged doors, between 30 and 36 inches wide and 80 inches tall. But, you need to consider the overall dimensions for the entire system, which are much larger. Overall, pocket door systems can range from 51 to 162 inches wide and 86 inches tall or more.
What is the width of a standard pocket door?
Standard pocket doors are usually 24 to 32 inches wide and 80 inches tall. When installing a pocket door, you need to double the size of the door to determine the available wall space. Therefore, if installing a new 24-inch pocket door, you need a wall area of 48 inches.
What is the rough opening for a 36 pocket door?
Similarly, you may ask, what is the rough opening for a 36 inch pocket door? The rough opening will be more than twice as wide as a usual one. The width is almost always two times the actual finished door with plus one inch. For example, a 2-foot 8-inch door (32 inches) the rough opening needs to be 65 inches. The height of the rough opening off the rough floor surface is usually 84.5 inches.
How do I know what size pocket door I need?
Consider Pocket Door Dimensions Double the width of the desired door, or pair of doors, to determine the wall space that's needed to install the pocket door frame. For example, 48 inches is needed to install the frame for a 24-inch pocket door, and 64 inches is need to install the frame for a 32-inch pocket door.
How much bigger should a pocket door be than the opening?
The open doorframe should be twice the width of the intended door slab, plus 1 inch. So, the rough opening for a 30-inch door slab should be 61 inches. Height should be the vertical length of the door slab, plus the thickness of the door track and desired clearance (about 1 inch, though product dimensions vary).
What is the width of a pocket door frame?
Products specificationsMax. Weight Per Door125lbs. [57kg]Max. Door Width36" (3'- 0") [914mm]Max. Door Height80" (6'- 8") [2032mm]Door Thickness1"[25mm] to 1-3/8"[35mm]Frame Header MaterialSpruce, Pine or Fir (#3 or better)12 more rows
How big is a 30 pocket door frame?
Size 30" x 8'. This pocket door frame is made of sturdy wood and steel. Size 30" x 8'. This pocket door frame is made of sturdy wood and steel.
Is a pocket door good for a bathroom?
Pocket doors are a great solution for smaller spaces that lack the wall space for a full swing door. This makes them perfect for small bathrooms, closets and connecting those two areas, for example between a master bath and the walk-in closet.
Are pocket doors outdated?
Pocket doors are not a common door type found in homes today but have actually been around for centuries. In the past, the door type was actually considered a standard feature in an upscale home but this gradually went out of style. Swinging doors became the new 'It' feature and homes continue to use such doors today.
How much room do you need for a 30 inch pocket door?
Check That You Have Enough Space A pocket door requires a “sleeve” inside the wall to retract into. For a traditional 32-inch-wide interior door, you'll need at least 66 inches of linear wall space: 32 inches for the door and the rest for the housing.
Can a pocket door fit in a 2x4 wall?
1:524:12Pocket Door Installation in 2x4 Wall - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's not a strong wall of course after all the drywall gets mounted. It it does make it a bitMoreIt's not a strong wall of course after all the drywall gets mounted. It it does make it a bit stronger. But this is a pocket. Door um kit that's designed to go in the place of a two by four wall.
What's the rough opening for a 28 inch pocket door?
A: Hi Lucky, the rough opening for this pocket door frame is approximately: RO Width: 58 in. RO Height: 84.75 in. Hope this helps!
What is the rough opening for a 32 pocket door?
A: Hello, the rough opening dimension is 84-1/2" x 65-3/4", height and width.
What is the best pocket door system?
8 Best Pocket Door Hardware in 2020Baldwin Estate Pocket Door Narrow Edge Pull. ... Johnson 1500 Soft Commercial Pocket Door Hardware. ... Kwikset Round Bed/Bath Pocket Door Lock. ... IDH by St. ... Prime-Line Pocket Door Handle And Pull. ... Tibres Sliding Barn Door Handle. ... Schlage Lock Company Sliding Pocket Door Pull.More items...•
Can I use any door for a pocket door?
As long as the measurement is correct for the pocket opening, the door is the right thickness, and the door hasn't been pre-drilled for a standard door lockset or hinges, you can use any kind of door for a pocket door.
How wide is the opening for a pocket door?
The door opening, or passage size, refers to the actual dimensions in height and width between the jambs (if present) and the level of the finished floor. A standard sliding pocket door has the same sizes as a corresponding hinged door. It typically measures 30" or 36" in width and 80" in height.
What is the rough opening for a 32 inch pocket door?
A: Hello, the rough opening dimension is 84-1/2" x 65-3/4", height and width.
What is the rough opening for a 36 inch pocket door?
So, in a 36 inches wide door, the rough opening will be 38 inches wide. The distance between the floor and the rough header should be two and a half inches (2-1/2″) taller than your new door's height. For example, in a standard 80 inches-tall door, the header should be 82-1/2″ above the finished floor.
What is the rough opening for a 28 inch pocket door?
A: Hi Lucky, the rough opening for this pocket door frame is approximately: RO Width: 58 in. RO Height: 84.75 in. Hope this helps!
How many types of pocket doors are there?
There are two main types of pocket doors.
How to choose pocket door?
When choosing a pocket door, make sure to look at both the overall dimensions of the door (which will include the wall) as well as the “passage size,” which will tell you how much of an opening you will have. Keep in mind that the room needs to be wide enough to fit the overall dimensions, not just the passage.
What Is a Pocket Door?
Pocket doors are a type of interior door that rolls in and out of the nearby wall instead of turning around on a hinge. Because of this, they eliminate the need to keep some free space immediately around it (the one that’s meant to allow you to swing the door open).
How tall is a passage in a wall?
Most of these sizes also have a “high ceiling” version available, which usually requires a toral space of 86 inches, and it offers a passage that’s 82 inches tall.
Why do people use pocket doors?
Pocket doors are a great option if you want to save space or if you have a room that occasionally needs a private corner. When deciding on the door’s dimensions, take into account the overall space at your disposal, as well as the actual door size.
Can you build pocket doors?
Building your custom pocket doors is always an option, albeit an expensive one. Most of the time, contractors buy pre-made sets for a pocket door that include the slid ing panels themselves, all the railings, and the adjacent wall where the door will be hidden.
Can pocket doors be used for soundproofing?
That means that the point where the two doors meet should be at the same distance as the nearby perpendicular walls. Pocket doors can be great for soundproofing: consider a model that uses a stud wall instead of a brick wall. Inside the stud, you can add a soundproofing layer.
How big is a pocket door?
For small pocket doors: from a 51 ¾ x 86 ¼ footprint , with a 23 5/8 x 78 ¾ passage.
What is a single sided pocket door?
Single-sided pocket doors. Single frame doors are much simpler and consist of a single panel that rolls up on one side. They are ideal for separating small sections of a larger space (for example, an office from the rest of the room). They are also commonly used in pantries, storage areas and double bathrooms.
What is a sliding door?
Sliding doors are a type of interior door that rolls up and down against the adjoining wall instead of turning on a hinge. So you don’t have to leave a space around you right away.
Why are sliding doors important?
When placed correctly, sliding doors can enhance the atmosphere, light sources and space of a room.
How to choose roll up door?
When choosing a roll-up door, consider both the overall dimensions of the door (including the wall) and the dimensions of the opening, which will tell you the size of the opening. Remember that the space must be large enough for the dimensions, not just the aisle.
What is a double pocket door?
Double pocket doors. This impressive alternative consists of two main leaves that usually open to the sides. Double pocket doors are often used in dining rooms: They are a great way to keep it as a separate room or combine it with the living room if there is a party. The result is a very elegant visual effect.
How much torus space is needed for a double door?
For most of these sizes, there is also a high ceiling version that typically requires 86 inches of torus space and offers an 82 inch high aisle. For double doors the dimensions may be more difficult. Double doors require cavity walls on both sides of the door.
How thick is a pocket door?
Pocket door hardware kits are usually available for doors 1-1/8 inches to 1-3/4 inches thick by 6 feet, 8 inches high. Look for a high-quality pocket door frame ...
What is pocket door?
A pocket door slides into a frame of metal and wood that is installed when the wall is constructed. In place of solid studs, the pocket-door frame utilizes “split studs”—one on each side of the door—which the door slides between to open and close.
Why are pocket doors so popular?
Pocket doors have long been popular because they “disappear” into a wall, so there’s no swinging door in either adjoining room. The “disappearing” aspect of the doors presents a neat aesthetic option to a home, and for certain floor plans this feature is critical to avoid doors that interfere with the natural flow of foot traffic. The space-saving design of a pocket door can be a handy solution for small living areas, such as bathrooms, where a hinged door might occupy too much floor place.
Can you cut pocket door headers with a hacksaw?
Because the pocket-door header contains a metal channel, we cut the metal separately using a hacksaw.
Can you replace a door latch with a flip out pull?
Instead of a door latch, you can remove the lock mechanism and replace it with a flip-out metal pull, so you’ll have a handle to tug the door closed when it’s fully recessed in the open position. You’ll also find options such as “soft close” actuators as well as kits that hide the door-guide hardware.
Do you need to paint a door if it is not finished?
Note that if your door is not already finished, you will need to paint or stain all edges and faces to prevent it from warping.
Do pocket doors have to be square?
Generally speaking, pocket doors all install in the same way, but there might be discrepancies between the kits of various manufacturers, so read the instructions before beginning. It is critical for proper door operation, however, that the frame is always installed square, level and plumb to the wall studs.
How to measure for a door?
This is your rough opening width (RO width). To determine the door size you want, take the RO width and subtract 1 inch. Take that number and divide it by 2. This is your door width.
How high should a door be for a 200 lb door?
If your door is under 200 lbs, the maximum door height will be the RO Height -3.5” (assuming ¾” finished floor thickness) or -2.75 if measured from finish floor.
