What temperature should I add fragrance oil to my wax?
As a general rule, we recommend adding fragrance oil at a temperature of around 180° - 185°. This helps to ensure the fragrance has uniform dispersion throughtout the wax. Please read the melting instructions for each respective wax you are using.
Can I add fragrance to my candle wax?
Adding fragrance to your wax at lower temperatures can result in the fragrance not binding properly with the wax. This would negatively impact the scent throw, and in a worst-case-scenario, cause the fragrance to leach out of the wax and pool on the top or bottom of your candle.
How do I apply a scent to my soy wax?
Apply your scent when your wax temperature is below the fragrance’s flash point. Usually between 50–55 degrees, but this can change depending on the wax you choose! To guarantee that your candle has an even scent load, properly mix in the fragrance. Every scent has a distinct effect on your soy wax.
How long does it take for wax to bond with fragrance?
In most cases, as long as the wax is fully melted and you stir your FO until it completely dissolves, the fragrance will have bonded with the wax. Why does wax temperature matter?
At what temperature do I add fragrance to wax?
Add your fragrance at the right temp: Adding your fragrance oil when your wax is at the proper temperature will help it bind to the wax, which will help give you a stronger scent throw. It is usually recommended to add your fragrance to the wax at 180-185F for soy and paraffin wax 200-205F for palm wax.
When should I add fragrance oil to soy wax?
Only add your fragrance when your wax temperature is below the flash point of the fragrance. Generally, between 50-55 Degrees, but this will vary based on the wax you are using!
How do you add fragrance oil?
0:151:29Measuring and Adding Fragrance Oil to Your Wax - YouTubeYouTubeStart of suggested clipEnd of suggested clipNext take your bottle of fragrance oil and slowly pour it in until you reach the desired amount ofMoreNext take your bottle of fragrance oil and slowly pour it in until you reach the desired amount of fragrance a good rule of thumb is one ounce of fragrance to every pound of wax.
At what temperature does fragrance oil evaporate?
Does the Flash Point Temperature Degrade Fragrance Oil?ItemFlash PointBoiling PointFragrance Oil115°F – 200°F+ (46°C – 93°C+)>200°F (>93°C)Wax392°F – 464°F (200°C – 240°C)650°F – 720°F (343°C – 382°C)Fragrance Oil + Wax365°F – 438°F (185°C – 226°C)605°F – 668°F (318°C – 353°C)Jan 21, 2021
What happens if you put too much fragrance oil in a candle?
Adding too much fragrance oil can lead to impaired burning characteristics. Temperature at Which the Fragrance Was Added - Adding fragrance oil add too high of a temperature may cause it to dissipate, or burn off, in the melted wax.
What makes a candle smell stronger?
The scent that a candle has comes from the fragrance oils that are added to these candles. The more oil in the candle, the stronger the fragrance. Some manufacturers cut costs by adding as little of the fragrance oil as they can as it is very expensive.
How do you add fragrance oil to candles?
Method. While unlit, simply add a few drops of your preferred fragrance directly to the candle wax (near the base of the wick). Once lit, the candle will throw the aroma of the fragrance oil you added. Please Note: Never add oil to the candle while it is lit or burning.
What temperature should you pour soy candles?
Golden Brands 415 Soy Container Wax Heat wax in a double-boiler system to 180°F - 185°F. Add fragrance and dye, stir thoroughly. Lower temperature to between 90°F - 100°F, then pour candles slowly. Depending on your climate, you may need to play with pouring temperatures.
How many drops of fragrance oil do you put in a candle?
A: The industry standard is considered 0.5 ounce of fragrance per pound of wax. For double-scenting, you would use 1 ounce of fragrance per pound of wax. For triple-scenting your candles you can use 1.5 ounces of fragrance per pound of wax. Make sure to confirm the wax you are using will hold that much fragrance.
What temperature should I pour wax melts?
Pour into molds at approximately 160°F/71°C Gently stir the blend until it reaches a temperature between 160°F and 170°F before pouring it into your clamshell or silicone molds.
How much fragrance oil do I add to soy wax?
As a rule of thumb, you need 1 oz fragrance oil in 1 pound of soy wax. Technically, it is 6.25% of the fragrance load. We have calculated it by dividing 1 oz of scented oil with 16 oz (1 pound of soy wax).
What temperature should essential oils be?
The ideal temperature for storage is 35 – 40 degrees. A refrigerator designated to store only your essential oils is ideal. Heat is a huge culprit in the oxidation process of essential oils.
How much fragrance oil do I add to soy wax?
As a rule of thumb, you need 1 oz fragrance oil in 1 pound of soy wax. Technically, it is 6.25% of the fragrance load. We have calculated it by dividing 1 oz of scented oil with 16 oz (1 pound of soy wax).
How can I make my soy candles smell stronger?
How can I make my Soy Candles Smell Stronger?Measure Appropriately: ... Add the fragrance oil at the right temperature: ... Cure the candles well: ... Keep the size of the room in mind: ... Keep the size of the wick normal:
What temperature do you add fragrance to soy 464?
Allow your wax to reach 185°F, mix in your fragrance, then remove from the heat source. Think of 185ºF as the “Goldilocks Zone.” It's hot enough for the fragrance to fully bind and mix with the wax and cool enough to ensure no fragrance is lost.
How do you add fragrance oil to candles?
Method. While unlit, simply add a few drops of your preferred fragrance directly to the candle wax (near the base of the wick). Once lit, the candle will throw the aroma of the fragrance oil you added. Please Note: Never add oil to the candle while it is lit or burning.
What is the best way to make candles smell good?
Adding the correct amount of fragrance oil (FO) to your candles is one of the most important steps in making candles that burn nicely and smell strong. However, it also helps to understand how wax temperature affects the performance of your candles.
What is a flash point in fragrance?
Remember that when it comes to fragrance oils, the term “flash point” is used in a legal context to identify which substances can be safely transported on an airplane. You can read all about what flash points really mean here.
What if my wax is hotter than my FO’s flash point?
We’ve talked about flash points a lot in our blog. This is another instance where it’s important to understand what they are and how they work. When it comes to fragrance oils, the term “flash point” is used in a legal context to identify which substances can be safely transported on an airplane. You can read all about what flash points really mean here. We also discuss situations where flash points do matter for candle making in our blog about adding the right amount of fragrance oil to your candles.
What happens if you overheat wax?
If you over-heat your wax, you may cause the wax to undergo chemical changes, which can alter its ability to bond with fragrance oils at all. On the other hand, if you add fragrance oil to wax that is too cool, the FO won’t be able to dissolve properly.
Why do you need a thermometer for candles?
It's a good idea to use a thermometerwhen making candles so that you can accurately tell the temperature of your wax. This way you won't have to guess whether your wax is too hot or too cold. Furthermore, if you're making large batches of candles, you can get more consistent results by making sure you're at your ideal wax temp when adding fragrance to each batch.
Do you need to overthink wax temperature?
Many candle makers worry about getting their wax to a specific temperature before adding their FO, but there isn’t necessarily a magic number. You don’t need to overthink wax temperatures too much when it comes to mixing your fragrance oils.
Do you need to mix wax before adding FO?
Many candle makers worry about getting their wax to a specific temperature before adding their FO, but there isn’t necessarily a magic number. You don’t need to overthink wax temperatures too much when it comes to mixing your fragrance oils. In most cases, as long as the wax is fully melted and you stir your FO until it completely dissolves, the fragrance will have bonded with the wax.
Why is it important to add fragrance oil at the correct time and temperature?
Even though candle-making is exciting, it’s important to be patient. Don’t get carried away and think timing and temperature don’t matter – they do! Patience is key, and you’ll get a better-finished product as a result.
When is the correct time to add fragrance oil to soy wax?
If you’re working with soy wax, you should add your fragrance when the wax reaches 50 to 60 °F above the melting point of the wax. So, if you’re using a soy wax that melts at 125 °F, heat it up to around 175 °F to 185 °F before you add the fragrance. This will also mean the wax is at a good pouring and storing temperature too.
What temperature should soy wax be before adding fragrance?
Before any fragrance is added, the soy wax should be heated to at least 160 °F (but not more than 185 °F). This important window will mean the best result for your candle.
Essential oils – why temperature matters
Since essential oils are concentrated volatile liquids, they evaporate easily. Because of their volatility, we need to be mindful of temperatures when adding oils to wax. After all, we don’t want to buy expensive oils for them just to evaporate during the candle-making process.
The difference between essential oils and fragrance oils
Don’t get confused between the two, they’re nothing alike! Unlike fragrance oils, essential oils are plant extracts that are 100% natural. Fragrance oils, on the other hand, are made up of essential oils, resins, and some synthetic aromas.
Pouring temperature
As well as considering what temperature to add the fragrance oil, you also need to bear in mind that different waxes require different pouring temperatures. For soy wax, this is 120 °F to 140 °F. So, after mixing in your fragrance oils, you need to wait a while further until the perfect pouring temperature is reached.
Conclusion – when to add fragrance oil to soy wax in candle making
Who’d have thought temperatures mattered so much? Well, as we’ve seen, they certainly do! So, remember, not too hot and not too cold, and don’t pour until the pouring temperature has been reached! We hope these tips will help you make someamazing candles!
