Full Answer
What is the actual size of Trex decking board?
Trex ® decking is available in 12, 16 and 20 ft lengths, with 8 ft decking available on shelf in select stores. Calculations provided for boards installed at a 90 degree angle. If laying boards on an angle, an approximate increase of 15% may be required. Trex Transcend® and Trex Signature® railing is available in 6 and 8 ft lengths.
Is Trex decking worth the price?
We say YES! Here are some of the major benefits to making the investment in Trex decking: Trex decking is eco-friendly because it is made up of 95% recycled materials. Click to see full answer. Keeping this in view, is composite decking really worth it? However, composite decking is a little more expensive than most.
How to measure for Trex decking?
“How to Calculate How Much Decking I Need”: Process Steps Overview
- Determine your deck’s square footage.
- Decide which board length to use.
- Determine board square footage.
- Divide deck square footage by board square footage.
- Determine deck board spacing square footage.
- Account for mishaps, waste, and off cuts.
Should I use Trex decking at ground level?
You can either build it directly on the ground or square the site and build it on top of risers as a floating deck. If you lay it directly on the ground, you may find that it’s more susceptible to absorbing moisture and might need additional maintenance.
What is the thickness of composite decking?
one to two inches thickMost manufacturers offer composite decking boards in 12', 16' and 20' lengths. The width varies by brand and style and can range from one to two inches thick and four to six inches wide.
What is the actual size of Trex decking?
2 x 6 boards available in 12', 16', and 20' lengths.
What are the three levels of Trex decking?
Trex deck design comes in three types: Select, Enhance, and Transcend.
What is the actual thickness of a 5 4 deck board?
1 inch thickA: 1 inch thick 5.5 inches wide Being a natural product, some shrinking and swelling will make it a bit smaller or larger, however.
Does Trex make 2x4s?
Trex® Transcend 2x4 and 2x6 Low-Maintenance - Pro Deck Supply - Store.
What is the gap between Trex deck boards?
Important points about gapping All deck boards must always be installed with a 6mm side-to-side gap. The Trex Hideaway Hidden Fasteners automatically measure the 6mm gap between grooved edge boards but you must still ensure the 6mm gap with the square edge boards.
What are the disadvantages of Trex decking?
CONS OF COMPOSITE DECKINGThe cost of composite decking boards can be higher initially. ... Surface damage can be an issue in some cases. ... Composite deck surfaces can be more slippery. ... The surface of composite decking may be warmer than wood planks. ... If you prefer the look of real wood, composite isn't for you.
What is the best grade of Trex decking?
Trex offers three tiers of composite decking—Transcend, Enhance, and Select. These are considered “good,” “better,” and “best,” with Transcend being best, Enhance being better, and Select being good.
Does Trex scratch easily?
Unlike painted wood decks, Trex or any composite decking won't scratch or scuff easily. It's also highly resistant to marring (the disfiguration or sheen that you sometimes see after dragging a heavy object across a wood deck). Beyond that, Trex decking is also resistant to fading, staining, mold and mildew.
Should I use 2x6 or 5 4 decking?
Which is better and what are the differences? Today, 5/4 decking is more widely used than 2×6 decking. Although the same width, 2x6s are 1/2″ thicker, making them stronger and less bouncy than 5/4 decking spanning the same joist spacing. However, 2x6s cost 30% to 50% more for similar quality and appearance decking.
How thick is TimberTech decking?
TimberTech AZEK Decking Features ✓ Multi-Width Decking in narrow (3.5”), standard (5.5”) and wide (7.25”) widths in the Vintage Collection® and standard and wide-widths in our Harvest Collection®. ✓ TimberTech AZEK MAX boards which are 1.5” thick (compared to the standard 1” thick) in Coastline® and Slate Gray.
Is 1x6 good for decking?
Width of material: We recommend only 1x4, 5/4x4 or narrower boards. Never use 1x6 or 5/4x6 material in close to ground applications. Spacing between boards: You must allow space for your deck boards to expand when they take on moisture, as they will inevitably do when exposed to wet weather, rain or high humidity.
What is the standard thickness of deck board?
16” on center = Standard for residential decking applications. 12” on center is recommended for a sturdier underfoot feel, when using standard deck board thickness of 1”.
Why are deck boards thicker?
Thicker deck boards allow for more space between your deck joists — which means you’ll likely need fewer joists for your build. Fewer joists can mean less labor and lower upfront material costs.
What is Azek Max decking?
TimberTech AZEK MAX boards are an appealing non-wood decking option. They can span the widest joist spacing (more on this below) and are often used for boardwalks or docks.
What is the best decking for non wood decking?
But if you prefer to go with more durable non-wood decking, your best option is TimberTech AZEK MAX capped polymer deck boards.
Why are deck joists wider?
With wider deck joist spacing thanks to thicker deck boards, you can potentially save both upfront costs and labor on your deck build.
How far apart should deck joists be?
Deck joist spacing plays a big role in determining what size boards for deck floor projects you need. If you’re installing TimberTech AZEK decking and your project features spacing that’s greater than the conventional 16” between the center of your deck joists, you’ll need to opt for thicker deck boards.
What is the purpose of deck joists?
Deck joists are the heart of your deck’s substructure. They support your deck boards, which fasten onto the joists from above. The greater the space between the joists, the stronger your deck boards need to be.
How thick is a deck board?
There is a nominal thickness and then an actual thickness. The most popular thickness for decking boards in North America is a 5/4 thickness which is an actual 1” thick. Use the table below to understand the most common board thicknesses:
How wide should a boat deck board be?
The more narrow the decking board, the less it will move and the less it will cup. This is why in boat decking construction and flooring you will typically see a nominal 3 (actual 2.5”) or nominal 4 (actual 3.5”) wide deck board being used. In applications along the coast, over water, boardwalks over rivers, the narrower board will provide the needed dimensional stability. Where there is limited air flow under the deck or drainage issues, the narrower deck board can again prevent unwanted cupping and movement.
Why are deck joists set upright?
They are set upright for strength, usually fastened to the house at one end, and sitting on top of a central support beam near the other end. Joists support the decking boards, which are fastened onto the joists from above. Joists are typically spaced out evenly for stability, ease of board installation and a clean look.
What is the MOR for decking?
Sometimes referred to as bending strength, MOR is a measure of a product’s strength before it ruptures (break s).
What is composite decking made of?
One of the most popular options for homeowners in the past 20 years has been composite decking, made of modified plastics and other materials. They made a splash in the market for their variety of colors and affordability, but over time the downsides have become more well-known.
Can you put bare feet on composite decking?
Today, many people are aware of the environmental hazards of using chemicals and plastics, as well as the heat absorption problem with composite decking — No bare feet allowed! But one of the lesser-known drawbacks is that they are very weak, and require joists to be placed very close together.
Is decking board stronger than joists?
The wider your joist spacing, the stronger decking board you need. Within a given wood species or decking product, the thicker the board, the stronger it becomes, relatively speaking. Conversely, the stronger your decking board, (based on MOR and thickness), the wider the joist spacing you can afford. One of the most popular options ...
How thick is Trex Enhance decking?
Enhance boards check in at one inch thick, the same as Transcend and slightly thicker than Select.
What is Trex decking?
Trex is one of the most popular deck brands in the world, offering a broad range of products to transform your home’s outdoor living space into a dream deck. From durable, gorgeous composite deck boards to safe, stylish composite and metal railing lines to LED deck lights, Trex has an enhancement for every aspect of your deck.
WHAT ARE THE DIFFERENT TYPES OF TREX?
The Trex decking brand is divided up into four separate composite deck board lines: Trex Enhance Basics, Trex Enhance Naturals, Trex Select, and Trex Transcend.
How long does Trex Transcend last?
Trex supports Transcend with its 25-year fade and stain warranty so the brilliant look you choose is the brilliant look you get for years to come.
What is Trex Select?
Trex Select finds a different way to accomplish the same lighter-weight decking as Trex Enhance. Instead of scalloped bottoms, Trex Select boards shave a tiny bit of the thickness off, checking in at 7/8 of an inch instead of a full inch like Enhance or Transcend.
Is it hard to get started renovating a deck?
But with so many options, it can be hard to get started. If you’re renovating an existing deck or building a new one, how do you pare down a huge selection? With so many choices, how do you make sure you’re taking advantage by finding the perfect fit for your project?
Is Trex Select scratch resistant?
Trex Select is also considered slightly more scratch-resistant than Enhance , and the line comes in one more color. Trex Select’s five color options have a bit more range to them, from the warm, reddish Madeira to the rich, cool Winchester Gray.
What is the maximum railing span for Trex?
Maximum Railing Span for all Applications Transcend, Select railing, and Trex® Signature™ railing 96" on center (2438 mm) for Transcend, 72" on center (1829 mm) for Select, 96" (2438 mm) clear span for Trex® Signature™
What screws are used for Trex fascia?
Trex recommends the use of Starborn® DeckFast® Fascia System, SplitStop™ Fascia Screws or Simpson Strong-Tie® Fascia Board Screws, for all composite Trex fascia profiles. For near water applications, you can also use Fascia System HeadCote® stainless steel screws. Refer to manufacturer recommendations for specifics if this is required. Always refer to manufacturing instructions first for installation methods. If instructions are not specific, refer to the below diagram. Always remember to gap fascia properly. A secondary glue is not required when using these fasteners. NOTE: The above fasteners can ONLY be used with fascia profiles. If using deck boards as fascia, refer to the recommendations in next column on this page.
What is the best decking for a deck?
Composite decking is a great alternative to traditional wood decking. When building your deck and railing, it is recommended that code-approved structural material be used as the framing and joists. One option is using Trex Elevations®steel deck framing. Refer to www.trex.com for more information on Trex Elevations. Check your local building codes for restrictions. Trex decking cannot be used for structural applications. Do not attach Trex decking directly to any solid surface or watertight system. In most cases, install fasteners at a 90° angle (perpendicular to the board). At board ends on the deck's edge, you can install screws placed perpendicularly at the recommended distance, at minimum of 1" (25mm) from the board end and edge, without splitting the board.
What is the maximum joist span at 60°?
At a 60° angle, maximum joist spanning is 2"
Does Trex reflect sunlight?
TREX PRODUCTS NEAR LOW-E WINDOWS Low-E glass reflects more sunlight, and it has been observed that the extra reflectivity combined with any concavity in the glass can act like that of a concave mirror, concentrating sunlight onto outdoor objects, including that of decking and railing. This can result in an extreme amount of heat concentrated on areas of the decking surface, which, in turn, can sometimes char the decking surface or cause the decking to slightly bow.
Do you need to gap Trex decking?
You must gap Trex decking, both end-to-end and width-to-width. Gapping is necessary for drainage and the slight thermal expansion and contraction of Trex the wood joist system. » ALWAYS follow Trex-recommended gapping guidelines. » aximum allowable perpendicular overhang for all M Trex decking is 1/2" (13 mm). » ll decks require air circulation to keep them dry and A looking good. To improve air flow, leave openings under the decking or increase gapping to 3/8"
Why do you need to gap Trex decking?
Gapping is necessary for drainage and the slight thermal expansion and contraction of Trex decking boards. Gapping also allows for shrinkage of the wood joist system.
How to reduce static electricity on Trex deck?
Both are effective in greatly reducing static electricity on Trex decking surfaces. Apply full strength, using a mop on a dry decking surface, and allow to dry; no rinsing or diluting needed. Products are non-toxic, non-flammable, non-staining (will not change the color of decking surface), completely biodegradable, and safe to use. Product is water-based and may require a second application after rain or other weather conditions. Over a period of time, the effect of static will dissipate naturally on the decking surface. See link for more information on product:
How do I clean a deck board?
Spray deck with soap, then follow by gently scrubbing each deck board with a soft bristle brush. Spray/rinse each individual deck board using a fan tip no closer than 8-in (203 mm) from the decking surface. RINSE THOROUGHLY. If dirty water from cleaning is left to dry, a film will remain on the decking surface. Issues with Concrete, Cement, Mortar, or Stucco Dust When working with cement, concrete, mortar, or stucco, protect the decking as much as possible in order to not get dust particles on the decking surface. These particles, once they get hot or wet, can cause a reaction on the decking surface and are very difficult to remove. If particles get on the decking surface, Trex recommends using Sakrete™ Concrete Dissolver (www.sakrete.com/products/ concrete-dissolver). BE SURE TO FOLLOW MANUFACTURER'S INSTRUCTIONS. Hard Water Staining Hard water is water with high amounts of mineral deposits like lime, silica and calcium. When the water dries, deposits are left behind, leaving unsightly spots on surfaces. This is not a defect of Trex products but an issue with the water itself. Generally, these deposits can be cleaned with white vinegar on decking surfaces. Rinsing is required, so care should be taken to not use hard water for this purpose. If hard water must be used, dry with a cloth or use a blower to dry surfaces. In some cases a deck brightener product may also be used to help clean hard water stains. Chalk Lines Most colored chalks are permanent and may discolor the surface. Use only Irwin Strait-Line®Dust-Off Marking Chalk (purple), available at www.Irwin.com.
Who makes Trex outdoor kitchens?
Trex®Outdoor Kitchens™is manufactured and sold by CT Acquistions LLC., under a Trademark Agreement with Trex Company , Inc. A Limited Warranty is provided by the manufacturer.
Who makes Trex spiral stairs?
Trex®Spiral Stairs™ are manufactured and sold by M. Cohen and Sons, Inc., d/b/a The Iron Shop, under a Trademark License Agreement with Trex Company, Inc. A 25-year Limited Warranty is provided by manufacturer.
Do you mix Trex Transcend Tropicals?
When installing any Trex decking product, especially Trex Transcend Tropicals, it is a good idea to mix and match all of the boards on the job site prior to installation to ensure an appealing mix of light and dark tones .
Who makes Trex pergolas?
Trex®Pergola™ products are manufactured and sold by Home & Leisure, Inc. , d/b/a/ Structureworks Fabrication under a Trademark License Agreement with Trex Company, Inc. A 25-year Limited Warranty is provided by manufacturer.
How long is a deck board?
Deck boards are typically 12 or 16 feet long, roughly 5-½ inches wide and about an inch thick - though specific dimensions can depend on the style of board you choose.
How long is a composite deck board?
Composite deck boards are typically offered in 12-foot and 16-foot lengths. Some brands, like Trex, feature a 20-foot deck board length which can be specially ordered. Composite decking is easy to cut with the right tools, so you can trim the long boards down to the size you need for shorter deck areas, while also getting a smooth, no-gap surface for long portions of your deck.
WHAT SIZE AND PROFILE DO I NEED ON MY DECK BOARDS?
Deck boards come in a variety of sizes and edge profiles, each serving a different purpose. Check out our high-level guide below to become a DIY expert and pick the sizes and profiles you need for your deck project.
What is a solid bottom on a deck?
Deck boards typically feature solid bottoms - a flat surface underneath your deck boards and a consistent thickness across the board. This is the nationwide standard deck board profile, maximizing the overall strength of your boards.
