what tools are needed to install hardie

Top Hand Tools for Board and Plank Siding Installation

• Circular Saws. When it comes to Hardie siding installation, circular saws are perfect for trimming and cutting thanks to their dust reduction capability.
• Shears. ...
• Lap and Siding Gauges. ...
• Saw Blades. ...
• Hepa Vacuums. ...
• Jig Saws. ...
• Pneumatic Nailers

Full Answer

Who will I work with to install my Hardie® siding?

As a homeowner, you will work with a contractor, who will facilitate the installation of your Hardie® siding, trim, soffit, wrap and flashing products (including products with ColorPlus® Technology). We have dozens of installation specialists throughout the U.S. and Canada who are available to work with any contractor or builder.

Where can I get installation instructions for my James Hardie products?

The best way to get the performance you expect from your James Hardie brand products is to work with a professional contractor. Visit the James Hardie Pros website, JamesHardiePros.com, for installation instructions, care & maintenance information, and more.

Can you use a nail gun to fasten Hardie siding?

Siding guns or roofing nail guns can be used to fasten HardiePlank® lap siding, HardiePanel® vertical siding or HardieShingle® siding, provided they are adjusted to the appropriate settings and use the fasteners specified in the installation instructions.

What kind of drill bit do you use for Hardie siding?

Masonry Bits and Carbide-Tipped Hole Saw Because Hardie® siding and trim is made of Portland cement, sand, cellulose and water, you should use masonry bits if you need to drill holes. For larger holes, you can consider using a carbide-tipped hole saw. This is best when you purchase one that’s specifically designed for cutting fiber cement.

What blade to use for James Hardie?

What is the best tool to cut irregular shapes?

What is the importance of heading to the jobsite with all the right tools?

Can you drill holes in Hardie siding?

Can you use a power saw on a siding job?

Can you use electric shears on a hardie trim?

See 1 more

What tools are needed to install fiber cement siding?

Required Tools for this Project You'll also need siding gauges, a fiber cement circular saw blade, a siding nailer and a 15 gauge trim nailer.

What is used to install Hardie siding?

2:478:13HardiePlank Lap Siding Install Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipThere are two nailing methods for installing hardiplank. The first is the blind nail method nailingMoreThere are two nailing methods for installing hardiplank. The first is the blind nail method nailing through the top edge of the plank. And the second is face nailing nailing through the overlap.

Do you nail or screw Hardie board?

Fasten HardieBacker sheets with proper nails or screws (as listed in ''Materials Required'' in the backer installation instructions) every 8'' around the perimeter and all supporting studs. Keep fasteners between 3/8'' and 3/4'' from sheet edges and 2'' in from sheet corners.

How do you install James Hardie cement board?

2:133:56How to Install HardieBacker Cement Board on Walls - YouTubeYouTubeStart of suggested clipEnd of suggested clipKeep fasteners 3/8 inch from board edges and two inches in from sheet corners. Set fastener headsMoreKeep fasteners 3/8 inch from board edges and two inches in from sheet corners. Set fastener heads flush with the surface. Without over driving.

Do you caulk the bottom of Hardie siding?

James Hardie DOES NOT recommend using caulk or “H”-jointers for the butt joints of HardiePlank® siding with ColorPlus® technology. James Hardie also DOES NOT recommend applying caulk to the horizontal overlap between siding planks (see Figure 2).

Can I use a roofing nailer for Hardie siding?

You can shoot Hardie siding on with air powered nailers or use hand driven roofing nails to attach siding to the home or structure. The nails can be ringed- shanked or smooth just make sure you are hitting the studs in the wall.

What is the best way to nail Hardie board?

For Hardie siding, it's recommended to use stainless steel or hot-dipped galvanized nails. You can either nail by hand or use a pneumatic nailer. However, it's best to use a pneumatic nailer for speed and consistency. At the bottom, the siding should be face nailed, and at the top, it should be blind nailed.

Do you need Thinset under Hardie board?

Since you are putting down hardie board on boards with small gaps, I would not recommend trying to put down thinset under it. It will make an enormous mess under the house (or whatever is under your bathroom). It is also more likely to make the floor uneven since it is hard to level thinset that is separated by gaps.

Which side of Hardibacker goes out?

Cement board has a smooth face and a rough one, and the rough face should be facing out if you're using mortar or thinset to adhere the tiles. Tile mastic, on the other hand, sticks better to a smooth surface, so the smooth side should be facing out if that's what you're using to adhere the tiles.

What kind of screws are used for Hardie board?

James Hardie recommends 1-1/4'' long galvanized or STAINLESS steel roofing nails or 1-1/4'' long ribbed waferhead screws in compliance with the tile industry. It is 8-18 x 3/8'' HD.

How many screws do I need for a 3x5 cement board?

55 screwsIn ceiling applications, screws should be placed every 6″”. You will use approximately 55 screws per 3′ x 5′ cement board and 150 screws per 4′ x 8′ cement board. In wall applications, screws should be placed every 8″” when connecting to the wall studs. This will amount to roughly 25 screws per 3′ x 5′ cement board.

How long before you can walk on Hardie board?

This is normally 12 hours but may be up to 24 hours in some cases. After the mortar is dry the backer board is ready to receive the mortar for the tile.

Does Hardie siding need to be nailed to studs?

Building codes will usually require installing siding over water-resistant barriers and nailed into the studs every 16 or 24 inches.

How do you attach cement board siding?

2:017:07How to Install Fiber-Cement Siding | This Old House - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne is simply use a utility knife and a straight edge and simply score it on both. Sides after iMoreOne is simply use a utility knife and a straight edge and simply score it on both. Sides after i score it i simply pick up the other end and snap.

How do you install fiber cement siding panels?

1:493:20Fibercement Panel Siding Installation - YouTubeYouTubeStart of suggested clipEnd of suggested clipJohn makes the cut pre drills the holes. And hands it up to Calvin and PJ they slide the top underMoreJohn makes the cut pre drills the holes. And hands it up to Calvin and PJ they slide the top under the fascia the edge into the track and snug the bottom up tight. Then they screw off some more.

How do you install Hardie backer board on the wall?

0:021:27Installing HardieBacker® 12mm backerboard onto a stud wall as ...YouTubeStart of suggested clipEnd of suggested clipI'm installing 12 mil Hardiebacker onto a stood wall. You must ensure that all your joints areMoreI'm installing 12 mil Hardiebacker onto a stood wall. You must ensure that all your joints are staggered. And brick bonded still leaving a three mil expansion gap around the room. And all I'm gonna do

Can You Screw into Hardie Board Siding? - Fine Power Tools

Roofing vs Framing vs Siding Nailer; Nail Gun for Fence. Right Nails for Pickets &… Nail Gun for Shiplap. (Best Nailer and Nail Size) What Size Drill Bit for #8, #10 Screw?

Hardie Plank And Siding: Siding Installation Tools - Blogger

Find out how to install the best siding for your home by yourself, how to find the contractor, how to cut hardie boards, which siding is the best, what installation tools to use and many other useful information related to hardie planks, outdoor walls and home siding.

11 Best Nail Guns For Hardie Siding and Trim - ToolzFinder

A top tier professional pneumatic siding nail gun being available in the market is Max USA Corp. CN565S3.It presents a cleaner finish than other guns as the slim guide contact arm helps reduction of bending and no mar contact tip eliminates the appearance of driver marks on materials and around the gun’s nail head.

What Nails to Use for Hardie Board Siding Installation?

The most commonly recommended type of nail is a ring shanked, smooth shank or plastic coated smooth shank nail.

How is Hardie Board Siding Manufactured?

James Hardie manufactures their products by combining cement, sand, cellulose fibers and mineral pigments with water.

What is a Hardie Board Siding?

The term “Hardie Board” is used to describe a cement board siding manufactured by James Hardie. It is typically gray in color, but it can be painted any color desired.

How Much Does James Hardie Siding Cost?

Hardie Plank siding is more expensive than other types of siding but it’s worth the investment. Hardie Plank costs anywhere between $0.80 and $6.00 per square foot.

How can I hire someone with the correct qualifications?

You should ask for references from their previous customers that can testify as to his or her skill set, their work et hic and reliability.

Are Hardie Board Sidings Termite Proof?

Hardie Board siding is resistant to termites and other pests. Termites cannot eat the cement in James Hardie siding. Termites are active for longer periods in warmer climates.

Is it Safe to Install Hardie On Your Own?

The sales for James Hardie siding have increased due to more people wanting replacement windows for their homes. The reason is because of its superior good looks, durability and energy efficiency.

What Is Hardie Board Siding?

Hardie board is a beautiful and durable exterior product that can last for decades if properly installed.

Why Choose Hardie Board over Other Types of Sidings

One of the most important home improvements you need to make every 20 or 30 years is changing or updating your sidings to add value to your home.

How to Know Your Home Needs New Siding?

If your sidings have been installed for many years, and now their boards or panels are coming off, repairing them would probably not be the right solution.

What Are the Pros and Cons of Hardie Board Siding?

Hardie boards are a popular choice for homeowners due to their easy maintenance and protection. However, every product comes with its pros and cons.

Things to Consider Before Installing Hardie Board

Hardie boards are heavy and difficult to install. Before you begin installing Hardie board, you must take the following safety precautions:

INSTALLATION OF HARDIE BOARD SIDING: A STEP-BY-STEP GUIDE

For Hardie boards to last long and look beautiful, these boards must be installed correctly.

Common Mistakes with Hardie Board Installation

Hardie board installation is a difficult task, and the job becomes more difficult if you are not aware of the installation protocols.

The Benefits of James Hardie Fiber Cement Siding

James Hardie is the pioneer of fiber cement siding and, since the 1980s, has grown into the world’s leading manufacturer of premium residential siding products—and for a good reason.

Materials and Tools Needed to Install New Siding

The video above shows which materials and tools you’ll need to properly install your new James Hardie siding. This list includes the following items:

Step-by-Step Installation of James Hardie Siding

Now the fun part: installing new beautiful James Hardie siding. Installing this premium product doesn’t take much additional effort or steps to install as other types, but it is vital to follow these steps for a smooth process.

When to Call the Pros

While homeowners can technically handle this installation, we always recommend hiring a professional installer. For one, this is a 2+ person job that comes standard when you hire the pros. And second, they have the expertise and precision needed to properly install siding, so you don’t face issues with leaks or damage sooner than later.

How long does a hardie board last?

It depends on where you live when it comes to maintaining the Hardie board. The paint could last anywhere from five to 15 years. It’s crucial to apply the paint correctly to get the most long-lasting quality out of it possible. You can do routine maintenance on your siding to ensure that it lasts longer as well.

How much gap between window and plank?

This makes the trims lay flat, especially when you ensure that a drip cap is installed over the window. It’s important to leave a ¼-inch gap between the plank and the window itself. This lets any liquid go behind the siding to get out and prevents things like mold and mildew.

How to cut a board with a saw?

Take a speed square or layout square to place on the measured lines. Using the saw or power shear , cut the boards. If you do decide to use a saw, consider investing in a dust collection bag to make clean-up a breeze.

Can you put James Hardie siding around windows?

How To Install Hardie Siding Around Windows. If you’ve wanted to spruce up the exterior of your home, adding James Hardie siding is a great way to do so. It can make your house look new, and thankfully, the installation is rather easy. Just like any other siding, it’s available in a variety of beautiful finishes that will fit your preferences.

Can you paint before installing Hardie siding?

The last thing that you’ll want to do is paint the trim. While Hardie does come with a 15-year warranting, fading is found to happen. You can paint before you install the siding or after.

Do you need to flash siding around windows?

Now that you’ve installed the Hardie siding around your windows, you’ll want to make sure they’re flashed properly. This helps rain to stay out of your house and acts as a weather-repellent. When adding the flashing, do so in horizontal and vertical directions to give the most thorough protection you can.

Is hardie board good for siding?

Hardie board is known for being extremely durable. It’s tough and can hold lightweight items, like hanging flower baskets, as long as they weigh less than a pound. Anything heavier comes with the risk of damaging the siding.

What Are Some Helpful James Hardie Lap Siding Installation Tips?

We have lots of great HardiePlank lap siding installation tips that will help you with your project.

Can you make your own starter strip?

HardiePlank lap siding requires a starter strip beneath the first course. You have two options here – you can make your own or you may be able to find acceptable prefabricated, third-party starter strips available for purchase. You can make your own fiber cement starter strip by ripping a piece of HardiePlank lap siding into 1-1/4-inch strips.

Does Hardieplank have a slip sheet?

HardiePlank lap siding with ColorPlus® Technology is shipped with a protective laminate slip sheet, which should be left in place during cutting and fastening to reduce marring and scratching. The sheet should be removed immediately after each plank is installed.

What blade to use for James Hardie?

Equipping your saw with a HardieBlade® saw blade is the best choice for cutting Hardie® fiber cement products. The blade has a unique pattern that’s specifically designed to cut fiber cement with less dust than traditional or continuous rim diamond blades. Unlike shears, the HardieBlade saw blade can be used on James Hardie’s full range of exterior products. Pro tip: you can extend the life of the blade by reserving it only for cutting fiber cement.

What is the best tool to cut irregular shapes?

Jig Saw. This may be a handy tool to have, especially if you’re working with older houses, or ones with a lot of details. Many tools aren’t built to cut irregular shapes, but a jig saw with a fiber cement cutting blade can work magic on curves, scrollwork, service openings, and more.

What is the importance of heading to the jobsite with all the right tools?

In addition to a little preparation, heading to the jobsite with all of the right tools will help you be efficient and deliver the high-quality results that homeowners demand.

Can you drill holes in Hardie siding?

Because Hardie® siding and trim is made of Portland cement, sand, cellulose and water, you should use masonry bits if you need to drill holes. For larger holes, you can consider using a carbide-tipped hole saw. This is best when you purchase one that’s specifically designed for cutting fiber cement.

Can you use a power saw on a siding job?

Power saws are efficient for cutting quantities of Hardie® siding and trim products on the jobsite, provided you follow the proper techniques. Both options should only be used outside and in a well-ventilated area. Regardless of type, if you’re purchasing a new saw be sure that it has a port so you can connect a vacuum to safely collect cutting dust and help comply with OSHA rules.

Can you use electric shears on a hardie trim?

For the smoothest cuts with shears, make your cuts with the board face down. Keep in mind that shears aren’ t recommended for products thicker than 7/16” and as such cannot be used on HardieTrim® boards.