what tools does an apprentice plumber need

7 essential tools for an apprentice plumber

Full Answer

What tools do plumbers need in their toolbox?

28 Tools Every Plumber Needs In Their Toolbox 1 Tube Cutter. 2 Telescopic Tube Cutter. 3 Adjustable Wrench. 4 Water Pump Pliers. 5 Mole Grips. 6 Hacksaw. 7 Junior Hacksaw. 8 Spirit Level. 9 Allen Key Set. 10 Drain Rods. More items...

What do you need to know as a plumbing apprentice?

As an apprentice, there’s a lot you will learn. The first thing that has to be at your fingertips is the safety and health aspects of plumbing. Before you learn how to do your job, you need to know about the ultimate plumbing apprentice tool list. Other than eye protection, there are many other tools you will need.

What tools do you need to start a plumbing business?

1. Pipe wrench 2. Basin wrench 3. Adjustable wrench 4. Faucet key 5. Hacksaw 6. Tubing cutters and plastic pipe cutters 7. Plumber’s torch 8. Thread sealing tape 9. Pliers 10. Press fitting systems 11. Plungers 12. Hand Auger 13. Snake Machine 14. Inspection camera 15. Goggles 16. Gloves 17. Heat shields/pads 18. PEX pipe expander & fittings 19.

What kind of wrenches do Plumbers use?

The adjustable wrench tightens and loosens hexagonal nuts and fittings on pipes. These wrenches come in various sizes, but plumbers most often have the 6- and 10-inch versions on hand. 4. Faucet Key Not a traditional wrench per se, but a critical part of any plumbing tools list.

What are adjustable pliers used for?

Why do you need an adjustable wrench?

What is number 7 in plumbing?

What is number 9 in pipe cutters?

Do you need a torpedo level for a drain?

See 2 more

About this website

What do I need for my first day of plumbing apprenticeship?

First and foremost, it's a general rule that the apprentice plumber needs to have their own set of equipment before they report to work....These include:-Pipe cutters.-Pliers.-Tape measure.-All-purpose wrench.-Level.-Screwdriver.-Hammer.-Utility knife.More items...•

What tools do plumbers carry?

Plumbing Hand ToolsTubing Cutter.Hacksaw.Hole saw kit.Pipe and tube benders.Mole grips.Plumber's torch.Thread sealing tape.Pliers.More items...

What is the most common tool used by plumbers?

Pipe Wrench Among the typical tools of plumbers, a pipe wrench is known as the most important tool that is used for basic plumbing purposes. You can say that pipe wrench loosens and tightens pipes, additionally, helps to fit the pipelines.

What are the duties of an apprentice plumber?

The responsibilities of an Apprentice Plumber include assembling pipes, cleaning the water supply, handling tools, and cleaning job sites. The Apprentice Plumber can expect to assist in complex jobs and handle smaller jobs on their own. Successful apprentice plumber will be well-organized and detail-oriented.

Which five tools are most common to plumbing?

FIVE ESSENTIAL PLUMBING TOOLS EVERY HOUSEHOLD SHOULD HAVEToilet Auger. The toilet auger is one of the most commonly used items in the plumber's tool kit. ... Flange Plunger. ... Plumber's Snake Or Sink Auger. ... Faucet Valve Set Wrench. ... Adjustable Pipe Wrench. ... Contact Horizon Services.

Do plumbers need drills?

There will be times as a plumber — whether you're an apprentice or newly qualified — when large-scale plumbing jobs require heavy-duty power tools. Whether you're installing a new bathroom or working on a new-build property, you'll need to drill, saw, cut and grind.

What skills are needed for plumbing?

Here are some of the top skills employers are looking for in any potential plumber:Good Physical Skills. One of the most important skills for a plumbing job is good manual dexterity and coordination. ... Interpersonal Communications Skills. ... Safety Skills. ... Problem-Solving Skills.

What does a plumber use to unclog a toilet?

To unclog toilets that couldn't be fixed with a plunger, use a toilet auger. Also called a plumbing snake, this flexible coil of wire is designed to extend into pipes and clear obstructions without damaging the plumbing. Feed the end of the cable into the toilet, taking care not to scratch the bowl.

What do professional plumbers use to unclog drains?

The standard drain cleaner tool plumbers use to demolish obstructions in pipes is a motorized drain auger, also known as a drain snake. An auger consists of a long, flexible coil of metal that works similar to a corkscrew. The end of the auger goes down the drain until it reaches the clog.

How much do plumbers make?

The average plumber salary in Singapore is S$31,200 per year or S$16 per hour. Entry-level positions start at S$24,000 per year, while most experienced workers make up to S$47,640 per year.

What are the duties of a plumber?

Install, repair, and maintain pipes, valves, fittings, drainage systems, and fixtures in commercial and residential structures. Collaborate with general contractors, electricians, and other construction professionals. Follow building plans and blueprints. Respond to, diagnose, and resolve plumbing emergencies.

What are the duties of a commercial plumber?

Responsible for installing, repairing and maintaining pipes, fixtures and other plumbing used for water distribution and waste water disposal in commercial and industrial buildings.

What does a plumber use to unclog a toilet?

To unclog toilets that couldn't be fixed with a plunger, use a toilet auger. Also called a plumbing snake, this flexible coil of wire is designed to extend into pipes and clear obstructions without damaging the plumbing. Feed the end of the cable into the toilet, taking care not to scratch the bowl.

What do professional plumbers use to unclog drains?

The standard drain cleaner tool plumbers use to demolish obstructions in pipes is a motorized drain auger, also known as a drain snake. An auger consists of a long, flexible coil of metal that works similar to a corkscrew. The end of the auger goes down the drain until it reaches the clog.

What kind of hammer do plumbers use?

Fiberglass Handled Hammers Plumbers and mechanics tend to prefer fiberglass because a decent one can be had for not a lot of money.

What skills are needed for plumbing?

Here are some of the top skills employers are looking for in any potential plumber:Good Physical Skills. One of the most important skills for a plumbing job is good manual dexterity and coordination. ... Interpersonal Communications Skills. ... Safety Skills. ... Problem-Solving Skills.

28 Tools Every Plumber Needs In Their Toolbox | JT Atkinson

Nothing's worse than turning up at a job and finding out you don't have the right tools. So we decided to put together a list of essential tools that should be in every plumber's toolbox so you can focus on the job at hand:

Apprentice Tool List – Electrician U – Training for Electricians ...

Double-Sided Electrician’s Tool Pouch. I’m a huge fan of leather pouches because they last for a long time. I’ve had the same pouches for the past 13 years, though now they’re used as my backup set.

10 Tools Every Plumber Needs - Alot Careers

As with every other repair-based profession, there are some things plumbers cannot do without. Here are ten of the tools that every plumber should have.

What do you need to know about plumbing apprentices?

As an apprentice, there’s a lot you will learn. The first thing that has to be at your fingertips is the safety and health aspects of plumbing. Before you learn how to do your job, you need to know about the ultimate plumbing apprentice tool list. Other than eye protection, there are many other tools you will need.

What do you need to do when you are a plumber?

When doing some plumbing work, you will need to straighten some items. To achieve a uniform look, you have to use a level. As a beginner, your apprentice plumber tool list should have a torpedo level. It will help you to install a drain on a slope or install a vertical water line.

What is a nipple extractor?

Nipple Extractor. Whether you’re an apprentice plumber or a homeowner, you will need a nipple extractor. It is great for doing simple plumbing tasks. You can use this tool to remove broken pipe nipples. It is also an excellent tool to help you remove shower arm threads.

What is an adjustable spanner?

Adjustable Spanner. You will use your adjustable spanner to help you with some specialized tasks. But, your adjustable spanner, isn’t different from the adjustable pliers. The adjustable spanner can grip on things even though it doesn’t have the grooves present in pliers.

What is a pipe cutter?

Pipe Cutters. Pipe cutters are essential tools to get your plumbing career on the road. There are two basic models of pipe cutters that you will need. The large one can cut 5/8”to 2 1/8” pipes, and the smaller type that can cut 1/8” to 1” pipes. The smaller one is a more versatile tool to work with if you’re working in a smaller space.

What is a hammer used for?

A hammer is one of those tools that will come in handy when you’re doing different tasks. You can use it to loosen some concrete or punching in anchors. One of the most versatile hammers you should have is the 8oz one with flat claws. You can use it for a variety of tasks.

What is a multi bit screwdriver?

A multibit screwdriver is a handy handheld device. It is convenient for days when you’re not up to organizing different sizes of screwdrivers. One other benefit of using a multibit screwdriver is that you can use its bits with a drill. This isn’t possible with a normal screwdriver.

1. Tape measure

A good sturdy measuring tape is the most important tool in plumbing. Anything you do as a plumber needs to be measured.

2. Torpedo level

Now that you have your pipe measured and it’s cut to length it needs to be installed. Ever hear the term, “$#*! rolls down hill” that’s no accident. Imagine if it didn’t then it would clog up the pipes because there is no gravity helping push the waste down.

3. Channel lock pliers

Channel lock pliers are a great tool. They can be used as a ratchet, wrench, lever, and in indestructible metal hand. I use channel locks more than my speed wrenches and ratchet. Every tool has it place, but some tools can be used interchangeably. Queue the channel lock pliers.

4. Ratchet and deep socket set

As a plumber, installing copper, cast iron, and pvc pipes is common. Install all these pipes on trapeze hangers, clevis hangers or using T-locks, they all require to be clamped down for support. Every clamp has a nut that needs to be fastened down. If the run of the pipe is 100ft that is a lot of nuts to fastened.

5. Wrench set – open head or speed

These tools are like the ratchet and deep socket set, however they are smaller, compact, and can easily access tighter spaces. A cap screw that turns when tightening a nut can make a job go nowhere. Use the deep socket on one end and use the wrench on the other end. BOOM! No more rotating cap screw. The job is well on it’s way to being completed.

6. Quick Square

The quick square is a wonderful tool and should be in every plumbers tool box or bag. There are several uses for this simple tool. Most people only know the quick square for the 90° and 45° angles and straight edges. I’ve used a quick square to find the angle of a 45° elbow and layout the pipe route on the floor.

7. Writing utensil

If cavemen could write we would be able to read about their history. However they weren’t able to find a pencil to record their own history thus we speculate about them. Same principle with being an apprentice. A journeyman or foreman will give you orders, sometimes it’s long.

What tools do plumbers use?

Adjustable pliers. There are a few tools that you’ll rely on time and again when you’re working as an apprentice plumber. One of them is a pair of adjustable pliers. They’re a staple of any plumber’s kit, helping you with many things such as screwing nuts and tightening small pipes. As they’ll be used fairly frequently, ...

What do you learn in a plumber apprenticeship?

Starting off, you’ll initially learn about the health and safety aspects of plumbing.

What is a good tool to use to chip off concrete?

A hammer is a great all-round tool that will come in handy for all sorts of things, from punching in anchors to chipping off bits of loose concrete. I’d recommend getting an 8oz hammer with flat claws as it’ll be versatile for a lot of different scenarios.

What do you learn in plumbing?

Starting off, you’ll initially learn about the health and safety aspects of plumbing. What’s more, you’ll do a lot of fetching, carrying, tidying, and everything else that needs to be done. After soaking up as much knowledge as you can, you’ll soon be doing actual plumbing work, and for that you’ll need tools.

How long does it take to become a plumber apprentice?

Are you looking to become an apprentice plumber? It will take years of training and hard work to become a properly qualified plumber and, to get there, you’ll need a range of tools.

Do you need a torpedo level for a drain?

Whether you’re installing a vertical water line or putting in a drain on a slope, a torpedo level will come in handy to any apprentice plumber. These small spirit levels are great for tight spaces and you won’t have to spend very much.

What is a plumber's tool?

A tool used by plumbers to cut through plastic tubing, with each one having it’s own cutting range.

What is plumbing software?

Plumbing software is used by most plumbing businesses to help organize and manage daily operations in the office and in the field. The best plumbing software allows you to:

What is a pipe wrench?

Pipe wrench. Plumbers use pipe wrenches to tighten and loosen nuts and fittings on pipes. Two of these are often used together, one for holding a pipe in place and the other for rotating a nut or fitting. Adjustable Wrench.

What is a spanner used for?

Also known as an adjustable spanner or crescent, is a tool used to loosen or tighten a nut or bolt.

What are the challenges of being a plumber?

When servicing homeowners, plumbers are constantly faced with a number of challenges, such as navigating small spaces, avoiding health hazards, and a variety of other challenges. Whether you are a residential plumber or a commercial plumber, these challenges require the right tools and a specific skill set.

Why do people wear goggles when working on plumbing?

Goggles protect your eyes from any hazardous materials you come into contact with while working on a plumbing job.

What is torque tool?

A tool used to apply a specific torque to a nut or bolt.

What do plumbers use to repair?

If you work as a plumber, pipes appear prominently on your plumbing tools list. Modern plumbers use a variety of tools and techniques to repair, alter, replace, and install piping in various (and usually tight) spaces around the home.

What tool do plumbers use to work on faucets?

Pipe wrenches come in various lengths, and prepared plumbers typically work with an entire set of these tools. 2. Basin Wrench. The basin wrench is a T-shaped tool plumbers use specifically to work on faucets.

What is the largest wrench used by a plumber?

1. Pipe Wren ch. The pipe wrench serves as a plumber’s largest wrench. Plumbers use these heavy tools to tighten and loosen nuts and fittings on pipework. They typically use two of these wrenches together—one to hold a pipe in place and the other to rotate the nut or fitting in the appropriate direction.

Why do plumbers save money?

They save plumbers time and money in the long run, because plumbers can make connections with them in less time than it takes to weld or solder the pipes.

What is an adjustable wrench?

The adjustable wrench tightens and loosens hexagonal nuts and fittings on pipes. These wrenches come in a variety of sizes, but plumbers most often have the 6- and 10-inch versions on hand for the next job.

What do trade professionals use to work out estimates?

Fewer trade professionals rely on a clipboard and pen-and-paper to work out estimates and scribble out invoices. Instead, they're armed with a vibrant digital tablet to help them better sell their products and services to homeowners, streamline paperwork, reduce mistakes, and capture payments on the spot!

Is there a tool for plumbing?

No tool is more associated with plumbing than the mighty wrench, and no plumbing tools list would be complete without it! There's no single all-purpose wrench, however, so prepared plumbers usually bring several to a job site.

What tool do plumbers need?

1. Tube Cutter. What plumber doesn't have at least a couple of these in their toolbox? Made for cutting through copper tube , Tube Cutters (also called Pipe Cutters or Pipe Slicers) are absolutely an essential tool that every plumber needs in their toolbox.

What is a water pump plier?

Also known as Slip Joint Pliers, Water Pump Pliers are easily adjustable and are great for dealing with grip jobs in tight spaces, making them a fantastic choice for any plumber's toolbox.

What to do when a screw doesn't come apart?

When pipes, nuts, bolts or screws just do not want to come apart easily, turn to your trusty hacksaw. If it's a tight squeeze and you can't get your hacksaw in place, remove the blade and use it by itself to cut stubborn fittings.

What is the best hacksaw for cutting in tight spaces?

An even better option for cutting in tight spaces is a Junior Hacksaw. While not as heavy duty as a full-size, Junior Hacksaws are fantastic value for money and are a staple in any workman's toolbox.

How many mm can a telescopic tube cutter cut?

As well as your trusty Tube Cutter, a Telescopic Tube Cutter can be adjusted to cut between 3-28mm tubing with the same clean cut. They're also great for when pipes are just that bit out of reach.

Why do you need a complete set of spanners?

Keeping a complete set of Spanners to hand will reduce the need to spend time hunting for the right size one for the job (just remember to put them back in the right place afterwards!!).

What to do with rounded nuts and bolts?

Nuts and bolts that have become rounded have to be one of the biggest pain in the arses on the job. Keep a pair of these Mole Grips on-hand to help deal with pulling rounded nuts and bolts out. Their locking mechanism also means you can grip things together while keeping both of your hands free. 6. Hacksaw.

What are adjustable pliers used for?

Your adjustable pliers are a stable for your EDC, you’ll be using them for many things such as screwing nuts, tightening small pipes and many other uses. You’ll want to get a dependable brand such as Channel Lock and Knipex or “K”nipex as some may call them, as they will be going thru a lot of hard labor, so keep that in mind. Ask Question.

Why do you need an adjustable wrench?

You’ll wanna have an adjustable wrench for a few reasons. First, it has a smooth jaw, unlike the adjustable pliers which are meant to grip on things, these are meant for either finishing work or just an everyday wrench.

What is number 7 in plumbing?

Number 7 is a hammer. You’ll need a hammer for all sorts of things, like punching in anchors, to chipping off loose concrete. I’ve been using a Stanley 8oz hammer with flat claws like this one. I find that it’s the perfect weight to power ratio for what a plumber needs to do on an everyday job. I usually carry mine in a tote but you can get a hook that goes on you belt and carry it around with you all day depending on what you’re doing.

What is number 9 in pipe cutters?

At number 9 is a tube cutter. You’ll want to have 2 models in your toolbox, a small one, and a big one. The small cutter can go from 1/8” to 1” which is perfect for tight spots and the bigger model such as this one can go from 5/8” to 2 1/8” for bigger pipes. Plus, most models have a built-in reamer in them to ream your pipes.

Do you need a torpedo level for a drain?

Sometimes you’ll need to install a vertical water line and other times a drain which requires a slope, in both of these cases, you’re gonna need a torpedo level and my personal choice for torpedo levels are ones with strong magnets, easy to read vials and a solid body construction.