Can you use 30 lb oil as chain and bar oil?
Is chain oil good for cold weather?
Can I use 10W30 for chainsaw bar oil?
Can I Use 10W30 Oil for Chainsaw Bar Oil? Yes, 10W30 oil can be used for the bar oil but not an ideal option. As a substitution, you may use it. 10W30 oil has multi-weight which makes it good for use in summer as well as in winter.
Can you use 5w 30 as bar oil?
Can I Use 5w30 for a Chainsaw Bar? Like 10w30 motor oil, you can use 5w30 oil. However, the thin and low-viscosity SAE5 weight oil will not cling to the chain and chainsaw bar very well in the summer. You may experience a lot of oil loss and a messy worksite if you choose this chainsaw bar oil alternative.
Can I use 5w 20 for chainsaw bar oil?
They are 5w20 and 10w30, which would be best? You can but it's not very good for the chain or the environment. The Husqvarna / Stihl stuff is much thicker and vegetable based so it doesn't fling off the chain as easily or poison your garden! 10w30.
What type of oil is bar oil?
2:303:29What is Chainsaw Bar & Chain Oil and Why Do I Need It? - YouTubeYouTubeStart of suggested clipEnd of suggested clipOne is for winter applications which is a thinner viscosity bar and chain oil in and of itself. NotMoreOne is for winter applications which is a thinner viscosity bar and chain oil in and of itself. Not only helps lubricate the chain. Against the bar. But it also helps with keeping the dust down.
Can I use engine oil for bar oil?
Choosing the Right Bar and Chain Oil One particularly bad idea is the use of motor oil, especially old, used motor oil that has been drained from an engine: Motor oil is not the right viscosity for lubricating chains. Debris contained in used motor oil can wear down the bar's groove and damage the chain.
What can I substitute for bar chain oil?
The 6 Best Chainsaw Bar and Chain Oil AlternativesVegetable Oil. Vegetable oil is one of the safest alternatives available to oil your chainsaw. ... Canola Oil. ... Motor Oil. ... Hydraulic Fluid (Diluted) ... Drained Motor Oil (Diluted) ... Drained Hydraulic Fluids (Diluted)
What grade of oil is chainsaw bar oil?
The viscosity of chainsaw bar oil can vary depending on the formula but 30W is standard. In cold weather, a thin 10W chainsaw oil may be advantageous, while very hot temperatures may require a much thicker 40W or 50W formula.
Can I use any oil for bar and chain oil?
If your manufacturer's bar and chain oil is unavailable, you can use SAE 30 weight motor oil to lube your chain during the summer and SAE 10 weight during the winter, according to the University of Missouri Extension.
Is chainsaw bar oil the same as motor oil?
Bar and chain oil is stickier than regular motor oil, so it stays on the chain longer. Motor oil flings off the chain more quickly, so if you try Terry's tip, be prepared to refill the oil on your chain saw more quickly than with regular bar and chain oil.
What is Stihl bar oil made of?
Made from a vegetable oil base, STIHL BioPlus™ oil is the environmentally conscious way to keep your bar and chain lubricated. This bar and chain oil offers excellent flow characteristics, even at low temperatures, while remaining less harmful to humans and the environment when compared to traditional oils.
Can you use vegetable oil for bar chain oil?
Effective – Vegetable oils have natural properties including good lubricity, resistance to shear, a high flash point, and a high viscosity index. These qualities lend themselves to chain lubricant requirements similar to petroleum-based chain oils, and do not contribute to chain or bar wear over time.
Can you use wd40 on chainsaw?
Naturally, the chain of your chainsaw will need to be oiled well to function perfectly. To make sure that it functions well, grab some WD-40 Multi-Use-Product. WD-40 works great for both – rust prevention and lubrication.
What is 5W 30 oil used for?
5W-30 oil is the lead viscosity recommendation by automakers over the past four decades for use in many vehicle types - passenger cars, SUVs, light vans and trucks – including those with high-performance turbo-charged and supercharged engines.
What grade is bar chain oil?
The viscosity of chainsaw bar oil can vary depending on the formula but 30W is standard. In cold weather, a thin 10W chainsaw oil may be advantageous, while very hot temperatures may require a much thicker 40W or 50W formula.
Which oil is better 5W 30 or 5W 40?
In practice, this means that each oil is just as viscous at lower temperatures and will remain viscous at -30°C, however 5w40 oil outperforms 5w30 oils at higher temperatures, being effective up to ambient temperatures of 50°C, as opposed to 30°C.
Is 5w30 OK for diesel?
5w30 is a motor oil that is widely used in light-duty petrol and diesel engines. Like most motor oils produced today, 5w30 is a multi-grade oil, meaning it ranges from a lower viscosity grade of 5 to a higher viscosity grade of 30.
The 6 Best Chainsaw Bar Oils of 2022 - The Spruce
Husqvarna makes one of the most popular bar and chain oils, no matter which brand of chainsaw you own. This bar oil is the best overall option in any type of weather, thanks to a carefully blended formula with enough tackiness to prevent excessive throw-off.
What Grade of Oil Is Used on a Chainsaw Oiler? - SFGATE
Bar oil is designed to stick to the chain and bar of a chainsaw. It doesn’t come with a Society of Automotive Engineers (SAE) grade, also known as weight classification, similar to motor oil for ...
What is viscosity in science?
More precisely, viscosity is the measure of a fluid's resistance to flow (under certain conditions). In a nutshell, the thicker the fluid is, the more resistance to flow it will demonstrate. Take, for example, this comparison of two common substances with different viscosities: water and honey. If you were to knock over a glass ...
When did viscosity grade become universal?
With numerous ways to define viscosity (and formerly no universal grading system), in 1975 , the International Standards Organization (ISO), along with American Society for testing and Materials (ASTM), Society for Tribologists and Lubricant Engineers (STLE), British Standards Institute (BSI), and Deutsches Institute for Normung (DIN), agreed upon a universal method to avoid confusion: the International Standards Organization Viscosity Grade (ISO VG).
Why do industrial lubricants lack VI?
Aside from the industrial applications which specifically require a High Viscosity Index (HVI) oil (when machinery is exposed to a wide range of temperatures), many industrial lubricants lack VI improvers because the machinery in which they operate are not subject to changes in temperature.
How long does it take to warm up engine oil?
Instead of it taking 15 minutes to warm up your engine oil, potentially damaging your engine, these additives allow for quicker lubrication of all engine components, eventually evening out at operating temperature. In short, for engine lubricants, the lower the "W" rating, the lower the pour-point will be.
What does density mean in lubricant?
These numbers are representative of a lubricant's viscosity; and though the word may sound a bit dense, it's actually pretty simple: it is a number value for the relative thickness (or weight) of your oil or lubricant.
Do you need to understand the viscosity chart?
Now, you don't really need to understand everything about this chart because that is our job; however, a basic understanding of the viscosity grading systems will help us help you. Being able to answer a few simple questions will allow our experts to navigate the chart and help you find the correct automotive, commercial, or industrial lubricant for your application. (Of course, the missing link in this conversation is oil additives, which are another monster entirely -- we'll get back to you on this).
Is lubricant like honey?
Alternatively, this fluid is a great deal thicker -- somewhat like honey. Lubricants resembling this liquid are higher viscosity oils.
What does weight of bar and chain oil mean?
The weight of bar and chain oil measures it’s tackiness/viscosity, which determines how sticky and thick the oil is. For effective lubrication, a good bar and chain oil will “cling” to the metal where it’s applied. Too little weight and the oil will practically flow straight off the bar.
What is bar and chain oil?
Bar and chain oil is a lubricant used to reduce friction caused by the metal-on-metal contact between a chainsaw’s bar and chain. Bar and chain oil can be made of a petroleum or vegetable base, and is applied by filling a dedicated oiler tank.
How does a chainsaw oiler work?
By design, a chainsaw’s oiler releases lubricant onto the bar, where it is gradually carried off by the chain and flung into the environment in tiny droplets. Over time, this can send quite a bit of oil into the surrounding trees, dirt, plants, etc.
What to do if bar and chain oil is not lubricating?
Remember, it’s sole purpose is to lubricate the chain, and then to fly off after a few seconds. So, if you’re not sure your bar and chain oil is okay, simply pour some in a cup/can and have a look. If there’s no visible chunks, and it looks like a lubricant, then you’re probably good to go.
What is the base for bar and chain lubricant?
Effective bar and chain lubricants are also made using vegetable oil as a base.
Why are bar and chain oil ratings based on seasons?
Bar and chain oil is also affected by environmental conditions, like the temperature, which is why the weight ratings are based on seasons. There are 3 weight ratings for bar and chain oil, which are summarized in the table below: Oil Rating. Typical Weight Range. Summer.
Is bar oil toxic?
It’s toxic – most people know that motor oil is toxic, and if you use it as a bar and chain oil it’s going to get on you, your clothes, and into the environment. It’s too runny – bar oil needs to be tackier than engine oil, which just means it is more viscous, or “sticky”.
What is the low temperature viscosity of oil?
The low temperature viscosity of the oil is a measurement that simulates starting a car on a cold winter day. That value has the letter “W” after the number and has a dash after the W. For example, if the oil is a 5W-30, the 5W part describes the viscosity of the oil at low temperatures. The lower the number, the faster the oil will flow at vehicle start up.
What Do Oil Viscosity Numbers Mean?
Viscosity is the resistance to flow of a fluid. Motor oil viscosity grades are based on a scale developed by the API (American Petroleum Institute) lubricant organization. The values are defined in a specification known as API 1509 and are based on the resistance the oil gives to flowing at two different temperatures – cold and high temperature. The measurement of viscosity at high and low temperatures are properties of multi-grade oils. Years ago, most vehicles used one viscosity grade oil in the summer and a different viscosity grade oil in the winter. But as motor oil technology advanced, additives such as viscosity index improvers allowed for the use of the same grade of oil year-round.
What is the fastest growing grade of motor oil?
This has led over time to motor oil viscosity decreasing – currently 5W-30 and 5W-20 are the most popular grade and 0W-20 is the fastest growing grade. These lower viscosity motor oils are needed to move through the thin engine pathways to protect and clean metal surfaces.
What is the difference between 5W-20 and 10W-30?
The 5W-20 will have a lower viscosity and provide less resistance than the 10W-30 at both start-up and normal engine operating temperatures. In the past, it was common for vehicles to require higher viscosity oils such as 20W-50’s, 10W-40’s and 10W-30’s.
Where to find the correct oil for my car?
As far as the best oil to use, the best place to find that information out is in your vehicle owner’s manual. In the owner’s manual, there are very often sections on maintenance and lubrication. It is here where the company that made your vehicle will describe the correct oil for your vehicle. Another great source to find the correct oil for your vehicle is the Castrol Oil Selector.
Is a 5W-20 the same as a 5W-30?
A 5W-20 and 5W-30 will have very similar if not equal viscosity at lower start-up temperatures. But as the engine heats up, the 5W-20 will move with less resistance than an 5W-30. Less resistance results in improved fuel economy but the oil is not as thick and forms a smaller layer of protection between metal surfaces.
What are the properties of vegetable oils?
Vegetable oils come with many desirable natural properties such as good resistance to shear , good lubricity , high viscosity index and a high flashpoint.
What type of oil do you use for chainsaws?
We mainly use petroleum-based motor oil for chainsaw. It needs to be refined before using on the chainsaws. However, the positive part of using petroleum-based motor oil is it gives a better grip on the chainsaw bar.
What is the best oil for a chainsaw?
You can also buy Oregon 54-059 Chainsaw Chain Oil. It’s slightly thinner and fully light compared to other oils. It will be the best chainsaw oil to use on your loving chainsaw.
Why is used motor oil better for chainsaws?
Collecting the oil while it is still hot will make filtering much easier. Also, in this way, the oil will get much cleaner. Used motor oil can sling off the chainsaw faster than other oils. This is because used motor oil is already broken down. It doesn’t have the sticky additive that is commonly found in bar oil.
What is the best substitute for chainsaw bar?
And Drained Hydraulic Fluids. These three substitute is best for chainsaw bar besides Pole saw bar. Motor oil produces more smoothness on the chainsaw chains and vegetable oil provides natural thickness on the chain. On the other hand, Hydraulic fluids provide more brush and keep it lubricated.
How long does it take for oil to dry on a chainsaw?
After applying it on the chainsaw give it a minute to dry. The oil gives a dry grip on the chains after drying up and works perfectly on all type of chainsaws.
Does motor oil work on chainsaws?
Motor oil gives an extra shine on the chainsaw blades and it lubricates faster than any other chainsaw bar oil. To keep the chainsaw chains and bars working properly, bars must be lubricated with the motor oil.
What is bar oil?
Bar oil is designed differently than the oil you use to mix in with your gasoline. Bar oil is used primarily as lubrication to stick to the chain and the bar of your chainsaw. Because of this, bar oil does not come with a special grade from the Society of Automotive Engineers. In other words, there is no grade or weight classification for bar oil.
How to test lubricating oil on chainsaw?
With your chainsaw fully lubricated with oil, go outside and hold your chainsaw 6 to 12 inches from a tree stump, a white rag, or anything where an oil discharge will be visible. Next, rev your engine hard for anywhere between 30 ...
What Types of Oil Are Used in Chainsaws?
The most popular forms of oil are vegetable oil, motor oil, and petroleum oil.
Why is my chainsaw oil thick?
It all depends on the temperature. This is because heat during the summer will thin your oil and the cold during the winter will thicken your oil. Imagine your oil is like ice cream. If the weather is too cold, your ice cream will get chunky and freeze and it won’t work to lubricate your chainsaw parts.
Why do you need to use oil on a chainsaw?
The whole point of getting oil for your chainsaw is so that the chain is lubricated and there is no friction while it runs circles around the bar. Proper oil for your chainsaw prevents damages, and some unique bar oils will also keep debris and sap from getting stuck to the bar and clogging the chain.
Why don't people use vegetable oil with chainsaws?
The reason many people don’t like petroleum-based oil with their chainsaw is because of the environmental implications. Petroleum is not friendly to the environment and is actually quite harmful to any natural thing that it touches. On the other hand, vegetable oil is far less damaging to the environment.
Is vegetable oil better than petroleum oil?
While it is still not good for the environment, it is definitely better than petroleum oil. Vegetable oil has less of a damaging effect on wildlife and nature and is even better for your health while operating your chainsaw.
Can you use 30 lb oil as chain and bar oil?
Can you take a 30-weight motor oil and use it as a bar and chain oil? This is not a good idea. Bar and chain oils have additives called “tackifiers”. These additives prevent chainsaw oil from flinging off during high-speed operation. The tacky oil clings to the bar and chain links to prevent dry operation.
Is chain oil good for cold weather?
A good all-season bar and chain oil will flow well during cold weather and offer suitable film strength during hot weather use. We suspect that cheaper chain oils simply don’t have the capacity to perform adequately in all temperatures. That’s why the cheaper brands are often marketed for single season use.
