
Assuming you are talking about 4wd lock and 4wd low, here is the difference. 4wd lock is a four-wheel drive that is locked in and cannot be disengaged. 4wd low is a four-wheel drive that can be disengaged and is used for low-speed situations such as off-roading.
When to use 4WD High vs. low?
Where can I Drive in 4WD?
- Rocky, uneven surfaces
- Deep snow tracks
- Deep mud
- Thick loose sand
- Steep, uneven declines
- Steep, uneven inclines
Is 4WD Lock the same as 4wd high?
when you engage 4WD LOCK, it engages the front axle, and locks the speed of the rear axle to the speed of the front axle. When you spin it to 4WD LOW, it keeps the front and rear axle locked together, but engages a 2.72:1 gear reduction, putting more torque to the ground.
What is the difference between 2WD and AWD?
What AWD does, however, is reduce the tractive effort at each wheel for any given throttle input. In other words - AWD makes it more likely you’ll be able to maintain traction in slippery conditions where equivalent 2WD system would be spinning their tits off like a pole dancer on crack.
How fast can you Drive in 4WD High?
The facts about 4-High: 4-High allows your vehicle to drive at fast speeds (manufacturers often recommend no faster than 55mph) while power is sent to all four wheels providing your car with better traction than 2-wheel drive. Depending on the application, most drivers will use 4-High more regularly than 4-Low. Click to see full answer.

What Does 4WD lock mean?
4wd lock is for any condition that you want the vehicle to drive all 4 tires at the same time. Typically Renegades operate as front wheel drive and engage the rear wheels if the front wheels begin to slip. Simply changing the dial selector to snow, sand, or mud will engage the 4wd lock.
What is 4WD Lock vs 4WD?
Locked in 4WD, a vehicle needs wheel slip to compensate for the different axle speeds—in 4WD, a truck is able to find traction on loose surfaces, but also needs loose surfaces to work. So you only really ever use 4WD off-road, or in deep snow.
How fast can I drive in 4WD lock?
If the vehicle is in motion, shifts can be made up to 55 mph (88 km/h). With the vehicle in motion, the transfer case will engage/disengage faster if you momentarily release the accelerator pedal after completing the shift.
What is 4WD Low used for?
4WD Low. Edmunds says 4WD low range is for off-roading conditions, like deep sand, where you need serious traction. Unlike 4WD high, adds Motor Authority, the low setting turns the wheels slowly but gives you more torque on less forgiving terrain.
Should I use 4WD Lock or low?
Without an Auto setting, 4WD High is what you'd use in any situation that's low-traction but relatively high-speed—a dirt road or snowy paved road. 4WD Low is strictly for slow off-roading or places where torque multiplication would really help you out (like deep sand).
Should I use 4WD high or low in snow?
For snowy roads, as well muddy terrain and other light off road trails - even sand - it is normally best to engage your 4 high setting when needed as it provides power to all four wheels, helping increase your traction while reducing the risk of slipping and spinning wheels.
Can you switch to 4WD lock while driving?
Yes, you can safely switch from 2H to 4WD while driving at speeds below 60mph. When switching from 4H to 4-Lo, you are required to slow the vehicle down to 5mph without the gas pedal depressed and the transmission in the (N) Neutral position.
How do you use a 4WD lock?
1:232:30Four Wheel Drive Operation - Four Position | 2020 Ram Classic 1500YouTubeStart of suggested clipEnd of suggested clipPosition keep in mind the vehicle won't shift between two wheel drive and four wheel drive lock ifMorePosition keep in mind the vehicle won't shift between two wheel drive and four wheel drive lock if the front or rear wheels are spinning the wheels must have traction to perform this shift.
Can you turn in 4WD lock?
0:271:14HOW TO USE THE 4WD LOCK & S AWC - YouTubeYouTubeStart of suggested clipEnd of suggested clipPerformance on slippery surfaces four-wheel drive lock can be activated. This simulates the lockingMorePerformance on slippery surfaces four-wheel drive lock can be activated. This simulates the locking of a center differential.
Does 4WD Low help in snow?
4WD systems are good for dealing with very deep snow and for off-road driving. The low range makes it possible to crawl over boulders, up steep hills and through thick mud. Truck-type 4WD is the choice for drivers who live in remote or rural areas where roads are not plowed regularly.
What happens if you drive fast in 4 low?
When you drive in 4×4 low, all four wheels are being powered by the engine simultaneously and the low ration gearing through the transfer case is being used. Wheel turning speed will be drastically reduced when 4×4 low is engaged but more engine power and torque are more readily available.
What 4 wheel drive setting is best for snow?
4H (High) When your 4WD system is set to 4H, you can drive fast, but not too fast. Most automakers suggest keeping the speed at 55 MPH or less. With 4H, you gain more traction on icy, snowy, muddy, and rocky roads.
How do you use a 4wd lock?
1:232:30Four Wheel Drive Operation - Four Position | 2020 Ram Classic 1500YouTubeStart of suggested clipEnd of suggested clipPosition keep in mind the vehicle won't shift between two wheel drive and four wheel drive lock ifMorePosition keep in mind the vehicle won't shift between two wheel drive and four wheel drive lock if the front or rear wheels are spinning the wheels must have traction to perform this shift.
What is 4wd lock Jeep?
Provides consistent traction by "locking" the axle shafts together so that torque distributes the same speed between wheels for rough and/or wet terrain.
How do you turn off 4wd lock?
0:220:542009 RAV4 How-To: 4WD Lock Button | Toyota - YouTubeYouTubeStart of suggested clipEnd of suggested clipIf the vehicle speed exceeds 25 miles per hour to turn the four-wheel drive lock feature off pressMoreIf the vehicle speed exceeds 25 miles per hour to turn the four-wheel drive lock feature off press the button again.