- Figure out how many lights you need for your Christmas tree. ...
- Before you start, plug in the lights to check if all the bulbs are working. ...
- Decide how you want to string your lights: Some decorators, like those at the Rockefeller Center, prefer the vertical method. ...
- With either light stringing method, place some lights deeper into the branches and place some closer to the front to create depth.
- A dead zone of lights occurs when you connect one string of lights to another: Hide the unsightly green plug by pushing it deep into the branches.
- If your lights aren’t hanging exactly where you want them, Walter suggests wrapping a little floral wire around the cord and branch to hold it in place. ...
- If you have a branch that’s drooping or unattractive, simply remove it by clipping it from behind with a pair of florist shears.
How to hang Christmas tree lights 3 different ways?
- Plug in the lights to make sure all the bulbs are working.
- Starting at the top of the tree, intertwine the lights on top of and under branches.
- Work your way down and around the tree, hanging lights in the back as well.
- When you reach the bottom, hide any extra lights behind the tree.
How to string lights on an artificial Christmas tree?
Types of Christmas Lights
- Mini String Lights. Mini string lights are the smallest lights you can get. ...
- Large Bulb Lights. Large Christmas lights can make a tree look like it’s taken right out of a holiday movie. ...
- Novelty Christmas Lights. Stand out and invite the spirit of the season into your home with novelty Christmas lights. ...
How to fix the lights on a prelit Christmas tree?
- If there are broken parts of the strand that do not appear to have any electrical wires inside, then they are likely not affecting the lights.
- If a broken strand does have electrical wires poking through, then discard the strand. ...
- If the strand appears fine, move on to inspecting the individual sockets and bulbs.
How to string Christmas lights on outdoor trees?
BARRE, Vt. (WCAX) - As the holiday season comes to an end, it’s about time for those Christmas decorations to come down. But don’t throw those dead sets of string lights in the dumpster. Most people probably don’t realize they have another option ...
What is the best way to string lights on a Christmas tree?
0:454:08How To Put Lights On A Christmas Tree Video - YouTubeYouTubeStart of suggested clipEnd of suggested clipAs a general rule of thumb for Christmas trees most people say to add about 100 lights per foot ofMoreAs a general rule of thumb for Christmas trees most people say to add about 100 lights per foot of tree. So that's something to keep in mind when you're picking out lights also. And I would also make
How do I hook up Christmas lights to my tree?
3:434:55Setting Up your Pre-Lit Christmas Tree - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe cluster of light cords close to the trunk of the tree. And plug the lights into both ends of theMoreThe cluster of light cords close to the trunk of the tree. And plug the lights into both ends of the multi-tap cord shape the middle section using the same alternating method of V shapes.
How do you put lights on an artificial Christmas tree?
1:203:23How to put lights on your artificial Christmas tree - YouTubeYouTubeStart of suggested clipEnd of suggested clipTake the lights to the back of the branch. Just bring them through around the branches to the front.MoreTake the lights to the back of the branch. Just bring them through around the branches to the front. Home on the side. Right starts at the back of the branch just wind it around the branches.
Do you start at top or bottom to string lights on Christmas tree?
Instead of wrapping the lights around the tree from top to bottom, hang Christmas tree lights vertically. Mentally divide the tree into three triangular sections. String lights by starting the string at the bottom of the tree and pulling it up to the top, then back down like a mountain.
How do you put lights on a tree from a tree?
1:303:37How do I install string lights on an outdoor tree for Christmas?YouTubeStart of suggested clipEnd of suggested clipIt's important to make sure you're wrapping them the right way the male connector needs to be at theMoreIt's important to make sure you're wrapping them the right way the male connector needs to be at the bottom of the tree. So that you can connect it to the female connector on the power.
How do you hang Christmas lights like a pro?
5:2820:51How to Hang Exterior Christmas Lights Like a Professional - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you can make it as long or as short as you need to we actually attach the ends with a male. AndMoreAnd you can make it as long or as short as you need to we actually attach the ends with a male. And a female if you're gonna do this on your own. Definitely. Learn about electricity don't electrocute.
How do you decorate a Christmas tree like a professional?
We break down how to decorate a Christmas tree like a professional in 12 simple steps.Build a theme. ... Start with classic ornaments. ... String the lights. ... Divide the tree into sections. ... Hang ornaments strategically. ... Cluster decorations. ... Fill in gaps with picks. ... Add a tree topper.More items...•
How do you decorate a Christmas tree step by step?
How to Decorate a Christmas Tree: The Definitive 8 Step GuideBuild the Tree. ... Spread out Branches. ... Evenly Wrap the Lights. ... Add the Core Baubles. ... Layer some Colour. ... Add the Extra Special Decorations. ... Place the Finishing Touches & Star on Top. ... Start Adding Presents Underneath.
How do I make Christmas lights fit perfectly?
2:1212:25How to Customize Christmas Lights to Fit Your Home - YouTubeYouTubeStart of suggested clipEnd of suggested clipSide of the cord is on the left side and I'm gonna take the wedge. And slide it right on. There weMoreSide of the cord is on the left side and I'm gonna take the wedge. And slide it right on. There we go so that Arthur's connected I've got my male female.
What order do you decorate a Christmas tree?
The important thing to remember is that these steps can be followed no matter what style or color of Christmas decor you want to use on your tree!STEP 1: READY THE TREE & GATHER SUPPLIES. ... STEP 2: START AT THE TOP. ... STEP 3: ADD THE GARLAND. ... STEP 4: ADD OVERSIZED DECORATIONS. ... STEP 5: ADD FILLER. ... STEP 6: ADD ORNAMENTS.More items...
How many lights do you need for a 7ft tree?
How many lights do I need?Tree sizeNumber of lights4ft tree2005ft tree3006ft tree4007ft tree5001 more row•Nov 10, 2021
How many lights do you need for a 6ft tree?
Our golden rule is 100 bulbs or 5 metres of lights per 2ft of Christmas tree. For a 6ft tree we recommend 300 bulbs or 15 metres of lights. If you're a fairy light lover, double up or mix and match styles for extra sparkle.
How do I put lights on a Christmas tree?
How to Put Lights on a Christmas Tree 1 Before you start, plug in the lights to check if all the bulbs are working. Leave them on while you work so you can see how they look on the tree, and so you can easily address dark spots. 2 Horizontal is the most traditional way to install your Christmas tree lights-traveling around and around the tree to wind in the lights. (It's the method we show in the video!) To give your Christmas tree a professional look, string them a little randomly, to give your lights a more organic, natural feel. As you work, place some lights deeper into the branches and place some closer to the front to create depth. 3 A dead zone of lights occurs when you connect one string of lights to another: Hide the unsightly green plug by pushing it deep into the branches. 4 If your lights aren't hanging exactly where you want them, Walter suggests wrapping a little floral wire around the cord and branch to hold it in place. Bend the loose ends of the wire towards the back of the tree to prevent any injuries. 5 If you have a branch that's drooping or unattractive, simply remove it by clipping it from behind with a pair of florist shears.
How to string lights on a tree?
To follow this tree lighting technique, divide the tree vertically into three sections (think trunk to tip) and string the lights by section. Beginning at the bottom, weave each string in and out of the branches, to the top of the tree and back.
How to make a Christmas tree look professional?
To give your Christmas tree a professional look, string them a little randomly, to give your lights a more organic, natural feel. As you work, place some lights deeper into the branches and place some closer to the front to create depth .
How to secure Christmas lights to a tree?
Slip the loop over one of the branchlets or greens near the trunk, and wrap the cord a few times around the green to secure it. Pull the string of Christmas lights taut to the tip of the branch, then work back toward the trunk, wrapping the cord over itself and the branch.
How do I hang Christmas lights vertically?
Instead of wrapping the lights around the tree from top to bottom, hang Christmas tree lights vertically. Mentally divide the tree into three triangular sections.
How many Christmas lights can you connect to a triangle?
When you reach the end of the first string, plug in the next set and continue weaving the lights back and forth until you reach the bottom, connecting no more than 300 Christmas lights end to end.
How many boxes of 100 light bulbs for a 6 foot tree?
Use about three boxes of 100-light strands for a 6-foot tree and about five boxes for an 8-foot tree. Begin at the bottom of the tree close to the trunk. Allowing some slack or leader cord in the first strand of lights, separate the cord near the first bulb so it forms a loop.
How many lights should I use for a 6 foot Christmas tree?
When hanging Christmas tree lights on a tree, you should plan on using 100 lights for every foot of your tree's height. So for a six-foot tree, you'll need about 600 lights. We'll show you how to hang lights on a real Christmas tree, it requires just a little patience.
How many lights do you need for a Rockefeller tree?
If you want the effect of a Rockefeller tree in your living room, you'll need extra light. To make your tree really wow, double the number of lights to 200 per foot of tree. Here's how to string lights on a Christmas tree that dazzles.
What is the glow of Christmas lights?
The glow of lights will enhance your tree's natural beauty. From subdued and simple to merry and bright, these Christmas tree lighting tips will make sure your tree glows. Trust us—It's easier than you think to put Christmas lights on a decorated Christmas tree correctly! blue green gold decorated christmas tree.
How many bulbs do you need to wrap a tree trunk?
Wrapping the trunk usually takes about half of a 50-bulb strand, says Miller, so as you begin lighting the branches, you won't need to camouflage a plug connection at the tree's narrowest point. "Once we get to the top, we work our way from branch to branch, wrapping the branches, sometimes splitting the wires—there are three wires to the strand ...
How many lights can be plugged in back to back?
They also keep track of how many strings of lights connect to each other: "Our rule of thumb is no more than 20 of our 5-mm bulb strands can be plugged in back to back," he says; most eight- and nine-foot-tall trees require only six to eight 50-bulb strands.
What is the goal of Miller's tree?
Miller has a clear vision for the look of the finished trees: "Our goal is for people to see the lights, not the wires ," he says. Achieving a polished look depends on making the plugs and connections as invisible as possible. "Hiding the end of a cord at the top of a tree is not as easy, and can be an eyesore," says Miller.
Types of Christmas Lights
Everyone has a different aesthetic when decorating for the holidays. From elegant to whimsical to over the top, Christmas lights come in different sizes and colors to suit many preferences. The first decision to make is what style you want and whether you need to buy indoor or outdoor lights.
How to Put Lights On a Christmas Tree Horizontally
No matter which direction you’re hanging lights, you need to prepare the tree first. Real Christmas trees require a day to naturally settle after being placed in their stand. Artificial trees need to be fluffed up before placing Christmas tree lights.
How to Put Lights On a Christmas Tree Vertically
Many people put lights on their Christmas tree horizontally because that’s how they learned to do it. Placing Christmas lights on a tree vertically is faster, which makes taking them off easier, too. Vertical wrapping also prevents overuse of lights, as fewer bulbs are needed to create a result similar to placing Christmas lights horizontally.
How long do Christmas lights last?
More than likely, your Christmas tree lights have been stored in a box for nearly a year. No matter how careful you put them away, it's inevitable that some have become tangled. Before you can put the lights on your tree, you need to prepare them.
Can Christmas lights get hot?
Certain types of Christmas tree lights can get hot. That coupled with wrapped gifts under the tree becomes a fire hazard. Another serious fire hazard is overloading extension cords and electrical outlets. Overloading either of these can lead to electrical fires.
Are LED Christmas tree lights better?
Yep! If your budget allows, purchase new LEDs, which consume less energy and throw less heat than old-school incandescent bulbs. LEDs also won’t dry out the branches as quickly, which will help keep your Christmas tree alive all season long. The recommendation from lighting experts is to use 100 lights per foot of tree.
Check your lights
Save yourself some frustration and check all the strands you intend to use before you get them on the tree, says Fitzsimmons. You’ll also want to keep the lights plugged in as you work so you can see what you’re doing.
Choose a method
Chances are, you string lights on your tree the way your family always has. But you can experiment if you want to see different effects. The most popular methods are to start from the top down, from the bottom up, or to arrange strands vertically; sometimes the fullness of the tree may dictate what technique works best.
How to Hang Christmas Tree Lights Horizontally
If you’re going the horizontal route, you can wrap each separate branch with lights from the tip of the branch toward the trunk if you like a lush, luxurious look. (Full disclosure: This takes a lot of time and lights!) For a more relaxed, organic feel, simply drape strings lightly atop each branch.
How to Hang Christmas Tree Lights Vertically
Some designers swear this is a faster and easier technique. For vertical lighting, start at the top back of the tree with the end of the strand that doesn’t have the prongs, then drop the strand straight down the side of the tree like a seam. Tuck in here and there on the way down.
Be creative!
Maybe elegant white lights are the only way to go in your house. If so, when choosing LEDs, opt for warm white if you want a more traditional feel or cool white if you want a bright, modern feel. Or perhaps you prefer a vivid approach and believe the only lights on a tree should be colorful! It’s fine to mix it up on the same tree, tree.
Everything You Need to Light Up Your Tree
This content is created and maintained by a third party, and imported onto this page to help users provide their email addresses. You may be able to find more information about this and similar content at piano.io