Maytag washer troubleshooting
- Make sure the Time is Accurate The first thing to check before calling the service center is the timer on your washer. ...
- Watch the user control and Display the board ...
- Verify the power is working ...
- Faulty Thermal fuse ...
- The Maytag washer won’t spin ...
- Leakage Problem ...
- Defective door lock ...
- Maytag washer troubleshooting (Guide) ...
Full Answer
How to troubleshoot Maytag washer?
- First of all, set the dial to its default at 12 o clock.
- Then rotate the dial back to the position where you started at.
- Now, rotate the dial clockwise three times, facing the three o clock position.
- Move the dial clockwise one step.
- Turn the dialer anticlockwise to return to the three o clock position.
What are some common problems with the Maytag Bravos washer?
Washer not Draining
- Drain Pump. The drain pump drains out used water with the help of an impeller. ...
- Clogged Drain Hose. If your drain hose is clogged with small pieces of clothes or other debris, water will not drain. ...
- Door Lock. Like other modern washers, the Maytag Bravos washer would run only if its door is latched properly. ...
- Water Pump Belt. ...
Are maytags good washers?
The Maytag MHW8630HC has all the features you could ever want. Combining excellent stain removal ability, a massive drum, and a plethora of features, the MHW8630HC is the best Maytag washer we’ve tested to date. The Heavy Duty cycle aced our cleaning tests, dealing with everything from red wine to oil.
How do I fix error code 5D on Maytag washer?
How do I fix error code 5d on Maytag washer? Maytag acknowledges that error codes like "Sd" sometimes appear by mistake. Push the "Pause/Cancel" twice or "Power" button once to remove the code from the screen and try using the washer again.
See more
Most Common Problems
The Maytag washing machine troubleshooting process begins with Repair Clinic's list of symptoms. Once you match your problem to one of the common technical causes we've included in our troubleshooting guide, you'll be on your way to a quality repair.
The Right Parts for the Job
We carry more than 4 million parts from over 175 major brands, so chances are, we've got the part you need.
Incoming Power Problem
Washing machine troubleshooting is one of the most common complaints that plagues appliance owners. There are many moving parts in a washing machine, and things can easily go wrong. The first thing to check when you find your Maytag washer won’t turn on is the power supply.
Do a Hard Reset
If you’ve tried everything and your washing machine is still not working, you may need a hard reset to put it back into operation.
Maytag Washer Start Button Stuck
If you need to repair your Maytag washing machine start button or any other appliance or electronic device, apply light pressure to the regions around the start button. You can also tap the areas around the button; this may help dislodge any foreign material that might be stuck between the button and make it function normally again.
Control Lock is Turned ON
Your Maytag washer has a Control Lock feature to prevent you from using it when plugged in. It may be activated by either pressing the Lock/Unlock button or pressing the Start button for three or more seconds. The Control Lock feature locks all functions to prevent an accidental start.
Incorrect Washer Settings
If your washer won’t start, there are a few things to check. If you have Delay Start activated, make sure that’s not occupying the time you wanted your cycle to run. Also, make sure your washer door is closed and that you’ve selected the right setting for your wash load.
Defective Control Board
Maytag washers typically have a user control board — also called a display board — that can be defective. The board is located on the inside top of the washer, behind the panel that has lighted buttons for functions like washing and drying. If a button isn’t responding when it’s pressed, it’s usually due to a defect on this board.
Broken Timer
The timing system of a Maytag washer is made up of timers, which control the spinning and washing functions of a machine. The timer advances the washer through its cycles until the cycle is complete.
How to check if a washer door latch is working?
If your washer has a mechanical door latch, you can manually check that it is working by checking if the door can shut properly when you turn your washer on to a cycle. If you have an electrical door latch, you’ll need to check it for continuity with a multimeter.
Why is my Maytag washer not spinning?
The next possible cause of your Maytag washer not spinning is a worn-out or faulty drive pulley. The pulley works with the drive belt to make the washer rotate during a wash cycle.
What is the door latch on a Maytag washer?
The door latch makes sure the door on your Maytag washer stays closed when it is operating. When it opens, the washer won’t spin. To check the door latch: Check your manual to find out if you have a mechanical door latch or an electronic one. Make sure the power is switched off.
Why won't my washer spin?
The clutch connects the transmission and the inner tub. Its role is to help the tub to spin to the speed it’s required to. If it becomes faulty , your washer won’t spin.
How to check if a washer is faulty?
Here’s how to check the drive belt: Make sure the washer is turned off. Locate the drive belt – you’ll have to remove the top and side panels.
How to check rotor on tub?
The rotor has several magnets on it that when damaged will stop the tub from spinning. Here’s how to check the rotor: Locate the rotor. Once located, you need to inspect the magnets for any signs of damage as well as the rest of the rotor component.
How to check a stator?
To check the stator assembly, you need to: Locate the stator – you can find it next to the rotor. Inspect the windings on the stator for any signs of damage or general wear and tear. If the windings are damaged, the stator will need to be replaced.
