What is a KREG jig?
After Craig Sommerfeld developed a U-shaped single-hole jig to hide the holes in kitchen cabinets that he was building in his home (per Kathie Sommerfeld’s request), the jig began being sold at woodworking shows. Proving to be a major success, Kreg Tool was officially born. The first patent was issued for the Kreg Jig.
Who is KREG tool?
After Craig Sommerfeld developed a U-shaped single-hole jig to hide the holes in kitchen cabinets that he was building in his home (per Kathie Sommerfeld’s request), the jig began being sold at woodworking shows. Proving to be a major success, Kreg Tool was officially born.
How do you adjust the KREG jig drill bits?
Set the shoulder of the bit (or the flattened end of the drill bit) at the drill depth height. For instance, if your wood is ¾-inch thick, you’ll want to set the drill bit shoulder to 3/4 inches thick. Then, tighten the screw built into the collar to set the drill bit for the correct height. How Do You Adjust the Kreg Jig Drill Depth?
What is included in the KREG jig kit?
The Kreg jig kit includes the screwdriver bit that will fit right into these square-headed screws. These self-tapping screws pull the two pieces of wood together to ensure a tight fit.
What magazine was the Kreg Jig on?
What was the first Kreg tool?
When did Kreg joinery start?
Who is the founder of Kreg Tool?
What is the K2000 jig made of?
When did the Kreg Jig come out?
That original jig was patented in 1990 and was Kreg Tool's featured product for a decade. The company began changing designs and adding models, some in which the height of the pockets could be adjusted along a piece of wood.
Who invented Kreg?
Kreg Tool Company all started with a kitchen cabinet and a question: “How do you attach a face frame to a cabinet so the joint can be hidden from view?” In 1986 while building kitchen units for his home, Craig Sommerfeld, a tool & die maker, wanted a better way of securing his face frames from inside the cabinet.
Who owns Kreg jig?
Todd Sommerfeld is a husband, father, and the second-generation owner & CEO of Kreg Tool Company in Huxley. Todd joined Kreg in 1999 after a brief stint in public accounting. Since that time Kreg has grown from 12 employees to over 240.
Where is Kreg jig made?
see less Kreg tool company is located in Huxley, Iowa. The box says "made in the USA of US and Imported Materials". Like so many things in this global economy materials are from the US and other countries. The product is made in the US.
How long have pocket screws been around?
The top of the original table, dating to around 1840, was attached with pocket screws. The first thing that comes to mind when the words pocket screw are thought of is the modern Kreg Jig. Pocket screws are actually quite old; they existed long before Craig Sommerfeld came up with an apparatus to bore them in 1986.
What are Kreg tools?
Kreg jigs are especially handy tools to use when you need to join two pieces of wood together. A Kreg jig creates something called a pocket hole, which guides your screw from one piece of wood into the other at an angle, creating a stronger joint with a cleaner look.
How many employees does Kreg Tool have?
Kreg Tool is a small manufacturing company based in Iowa with only 50 employees and an annual revenue of $27.2M.
Why do Kreg jigs have 3 holes?
0:042:10Understanding pocket hole spacing: Kreg® Pocket-Hole Jig 520PROYouTubeStart of suggested clipEnd of suggested clipThe different hole spacing gives you three different easy options to space your pocket holes inMoreThe different hole spacing gives you three different easy options to space your pocket holes in boards of different widths.
Is Kreg Jig worth the money?
In our overall opinion, a Kreg jig is absolutely worth the money if you plan on doing any real amount of woodworking or DIY projects. If you're thinking about just building one thing, you might be better off going with a different way to join boards. But I can tell you, building is addictive!
Is Kreg K5 discontinued?
Availability: Discontinued.
Is Kreg Jig worth the money?
In our overall opinion, a Kreg jig is absolutely worth the money if you plan on doing any real amount of woodworking or DIY projects. If you're thinking about just building one thing, you might be better off going with a different way to join boards. But I can tell you, building is addictive!
Is Kreg k5 discontinued?
Availability: Discontinued.
Are pocket holes better?
The superior strength of a pocket hole joint has actually been proven. Independent testing found that a pocket screw joint failed at 707 pounds when subjected to a shear load while a comparable mortise and tenon joint failed at 453 pounds - meaning that the pocket screw joint was approximately 35% stronger.
Do you have to use a Kreg Jig?
Ultimately, you'll need to decide if one of their tools is right for you. The Kreg Jig is a valuable tool. If you plan to construct cabinets, bookshelves, tables, or anything with multiple joints, then the Kreg tool is undoubtedly worth your money.
The Story Of: Todd Sommerfeld | Owner & CEO of Kreg Tool Company
Presenter: Todd Sommerfeld, Owner & CEO of Kreg Tool Company Date: October 2, 2020 Time: 12-1pm Location: Online Come and listen to the stories of entrepreneurs, small business owners and community members making their mark in Iowa. As you create your own story, treat yourself to this time each month to rekindle your entrepreneurial spirit and connect with others. This month listen to the ...
Google Maps
Find local businesses, view maps and get driving directions in Google Maps.
What is a Kreg jig?
The Kreg Jig allows for consistent angles, a very clean pocket hole, and the proper depth. The Kreg tool will also keep the edge of the board from splitting. As you know, there is nothing more irritating than the end of your board cracking. Nothing.
How much does a Kreg pocket hole ig cost?
Thankfully, Kreg offers a wide array of price points, with some starting at $15.
Is a Kreg Jig worth it?
Yes, the Kreg Jig tools will cost money. While we think they are worth it, you need to assess this on your own. If you only plan on doing one project requiring pocket holes, then you might be better off borrowing a jig from one of your friends.
Can you see the holes in a pocket hole jig?
These plugs go into the holes created by the Pocket Hole Jig. Then you can sand them smooth with the surface. Yes, you’ll still be able to see the plugs. However, if you use a coat of paint, the pocket holes become invisible.
Is Kreg a bonus?
While we mentioned Kreg’s complete system as a bonus, depending on who you are, this can also be a downside. If you haven’t already been using the Kreg system, then you’ll probably need to buy more of their products.
Do I need a Kreg Jig?
Some have tried to create pocket holes without a jig. While this might be feasible for some, there are several reasons why the Kreg pocket hole jigs will make things easier and give you a better product.
What is pocket hole screw?
Pocket-hole screws are the secret behind the strength of Kreg® Pocket-Hole Joinery. Find the screws you need for your projects – in all different kinds of finishes, thread styles, and sizes.
How to make a pocket hole?
With pocket-hole joinery, it’s easy to make rock-solid wood projects and long-lasting repairs. 1 Drill – Create a pocket hole at the exact right angle with our specialized drill bit 2 Drive – Connect your workpieces together with specially engineered Kreg® pocket-hole screws 3 Done – In just minutes, you’ve created an incredibly strong joint
What magazine was the Kreg Jig on?
1995. The Big Break. The Kreg Jig was featured on the January cover of Wood magazine. This big break improved awareness of the Kreg Jig and increased recognition of pocket-hole joinery; no doubt helping make it a method used in many woodshops today.
What was the first Kreg tool?
Proving to be a major success, Kreg Tool was officially born. The first patent was issued for the Kreg Jig. This marked a significant milestone in the story of Kreg Tool. While still in high school, Todd Sommerfeld accompanied his father to a woodworking tradeshow in St. Louis. That trip changed everything.
When did Kreg joinery start?
The answer changed the way thousands of woodworkers join wood. Since our humble beginning as a family-owned company in 1989, the Kreg name has become synonymous with pocket-hole joinery. Woodworkers of all skill levels have come to trust our products time and time again.
Who is the founder of Kreg Tool?
Kreg Tool Company is Founded. After Craig Sommerfeld developed a U-shaped single-hole jig to hide the holes in kitchen cabinets that he was building in his home (per Kathie Sommerfeld’s request), the jig began being sold at woodworking shows. Proving to be a major success, Kreg Tool was officially born. 1990.
What is the K2000 jig made of?
The K2000 jig was released, forever changing the way jigs would be manufactured. Made from injection-molded plastic, instead of metal, this model was faster and less expensive to produce, far more durable, and allowed for additional convenience features. 2003. Home Centers.
