See more
Where was the Titanic built?
In March 1909, work began in the massive Harland and Wolff shipyard in Belfast, Ireland, on the second of these three ocean liners, Titanic, and continued nonstop for two years.
Why did the Titanic sink?
While it has always been assumed that the ship sank as a result of the gash that caused the bulkhead compartments to flood, various other theories have emerged over the decades, including that the ship’s steel plates were too brittle for the near-freezing Atlantic waters, that the impact caused rivets to pop and that the expansion joints failed, among others.
What happened to the Titanic on April 10th?
Titanic Sets Sail. Titanic’s departure from Southampton on April 10 was not without some oddities. A small coal fire was discovered in one of her bunkers–an alarming but not uncommon occurrence on steamships of the day. Stokers hosed down the smoldering coal and shoveled it aside to reach the base of the blaze.
How many people could the Titanic hold?
Titanic could carry up to 2,435 passengers, and a crew of approximately 900 brought her capacity to more than 3,300 people.
How much more likely were passengers to survive on the Titanic than other passengers?
Did you know? Passengers traveling first class on Titanic were roughly 44 percent more likely to survive than other passengers.
What was the Titanic's product of competition?
The Building of the RMS Titanic. The Titanic was the product of intense competition among rival shipping lines in the first half of the 20th century.
What class was the Titanic?
Some had paid less than $20 to make the crossing. It was Third Class that was the major source of profit for shipping lines like White Star, and Titanic was designed to offer these passengers accommodations and amenities superior to those found in Third Class on any other ship of that era.
Where Did Titanic Set Sail From?
The Titanic set sail from Southampton, England, on April 10th 1912. She was built in Belfast, Ireland, and sailed to Southampton in England for her maiden voyage. She stopped in Cherbourg in France and Queenstown in Ireland to pick up passengers, crew and supplies. Her final destination was to be New York, USA but she never completed the journey.
Where was the Titanic's return journey?
Titanic’s Route (Photo: © OpenStreetMap contributors) The return journey should have been from New York to Plymouth in England, back to Cherbourg, and finally to Southampton.
How long did the Titanic take to sink?
The ship made good time for the next two days but the Titanic was never able to complete her maiden voyage. On the 14 April 1912, after four days at sea, the Titanic struck an iceberg that tore a hole in the ship’s hull below the waterline. The hull began filling with water, and within three hours, the vessel had sunk.
Why did the Titanic sink?
On the 14 April 1912, after four days at sea, the Titanic struck an iceberg that tore a hole in the ship’s hull below the waterline. The hull began filling with water, and within three hours, the vessel had sunk. Because of a lack of lifeboats and the proper emergency procedures, only 705 people survived the disaster.
Why did the Titanic have to borrow coal?
At the time there was a coal strike in Britain which meant that coal had to be borrowed from other ships, including the sister ship, Olympia, so that the Titanic could begin her voyage.
What is the Titanic famous for?
The Titanic has become famous as being the ‘unsinkable’ ship that did unfortunately sink. The Titanic made many successful port stops on her trip before the accident happened where she picked up passengers and supplies.
What company owns the Titanic?
White Star Line (the company that owned the Titanic) planned to offer weekly sailings in each direction, leaving Southampton on Wednesdays and New York on Saturdays. Both the Titanic and her sister The Olympic were scheduled to sail throughout the year, with trips booked until December.
Where Did Titanic Set Sail from?
The Titanic’s Scheduled Route
- Many modern cruise ships complete transatlantic crossings regularly although the route has changed slightly. To learn more about how modern cruise ships compare to the Titanic, check out this post: Titanic vs a Modern Cruise Ship Fleet – Comparison with Photos! White Star Line (the company that owned the Titanic) planned to offer weekly sailings in each direction, leaving Sout…
Titanic’s First Journey – from Belfast to Southampton
- The Titanic left Belfast on Tuesday 2nd April at 8pm. She arrived into Southampton at 12:00am on Thursday 4th April. Work on the White Star Line’s state-of-the-art luxury steamship began in March 1909 in Belfast, Ireland, at the Harland and Wolff shipyards, the Titanic was designed by Alexander Carlisle. It took two years to complete the ship, the hull of which was the largest mov…
Titanic’s Second Journey – from Southampton to Cherbourg
- The Titanic left Southampton on Wednesday 10th April at 12pm. She arrived into Cherbourg at 8.10pm on Wednesday 10th April. Around midnight on 4 April 1912, the Titanic arrived in Southampton, where she remained docked for a week. The crew were the first to come aboard. Most of the crew were from Southampton, of the 685 crew members who died in the tragedy, 54…
Titanic’s Second Journey – from Cherbourg to Queenstown
- The Titanic left Cherbourg on Wednesday 10th April at 8:10pm. She arrived into Queenstown at 1:55pm on Thursday 11th April. The Titanic sailed into Cherbourg, the world’s largest artificial harbor and dropped anchor near the Central Fort. Due to the fact that the water in the port was not deep enough the Titanic could not dock. Tenders transferred the 281 passengers (151 First Clas…
Titanic’s Third Journey – from Queenstown to New York
- The Titanic left Queenstown on Thursday 11th April at 1:55pm. The Titanic arrived in Queenstown (today known as Cobh) to pick up its last passengers before beginning the trans-Atlantic voyage. The ship dropped anchor at Roches Point. Before the first world war Queenstown was Irelands most important mail and passenger port. Two tenders were responsible for transporting the pas…
The Sinking of The Titanic
- The ship made good time for the next two days but the Titanicwas never able to complete her maiden voyage. On the 14 April 1912, after four days at sea, the Titanic struck an iceberg that tore a hole in the ship’s hull below the waterline. The hull began filling with water, and within three hours, the vessel had sunk. Because of a lack of lifeboats and the proper emergency procedures…