How do I Move my Invisible Fence to a new home?
Bring your Invisible Fence Brand transmitter and Computer Collar Receiver with you to your new home and contact us at 866-804-1250 to install new boundary wire, flag your property and re-train your pet (s) to their new boundaries. To request a service appointment online, click here. How do I purchase an Invisible Fence system?
How do you use an invisible fence to keep dogs out?
Install the invisible fence and set up flags at the invisible fence line. Take your dog on a walk with a long leash and a separate non metal collar, within but near the perimeter of the invisible fence line. Walk a good distance away from your dog inside the fence line.
How does the invisible fence collar work?
The collar first produces an audible signal to the dog as he approaches the boundary of the invisible fence ,to let the dog know he is at approaching the boundary. If the dog proceeds to the boundary of the invisible fence he will receive a signal stimulus correction as he crosses the invisible fence line.
Can Invisible Fence be installed along an existing fence?
Invisible Fence system boundary wire can be installed along an existing fence for reinforcement from digging, jumping, or getting out of an open gate. Our Pet Safety Professionals can aid you in the design of your system. Can Invisible Fence be installed through water?
How far apart should you put flags for Invisible Fence?
The training flags should be placed approx 8 – 10ft apart around the boundary. Use the collar to find the edge of the avoidance zone and place the flag in the ground in the area where the collar starts to beep.
How do you layout an Invisible Fence?
0:154:23Electric Dog Fence Layouts - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe full yard layout gives you dog the most freedom. And is by far the most popular. ThisMoreThe full yard layout gives you dog the most freedom. And is by far the most popular. This arrangement gives your dog free rein of the entire yard. You keeps them safe from the dangers of the street.
Does an Invisible Fence have to make a complete loop?
The answer is no, an electric fence DOES NOT have to make a complete loop. However, there are advantages and disadvantages to completing the fence loop. Creating a continuous loop will increase voltage on the fence line, because power is pushed in both directions.
What color flags are best for dog training?
I suggest you use blue or red. You will be placing the flags about 3 feet apart in the area you want to create the boundary, so be sure to purchase enough flags plus several extra for when something destroys the flag, like storms.
How do I run an invisible fence under my driveway?
0:061:44Getting Underground Dog Fence Wire Around Driveway - YouTubeYouTubeStart of suggested clipEnd of suggested clipNow you can kind of groove in the driveway using a masonry saw and tuck the wire in that groove. AndMoreNow you can kind of groove in the driveway using a masonry saw and tuck the wire in that groove. And then caulk over it but it can look bad and it starts to deteriorate the asphalt around that groove.
How do you bury invisible fence wires?
In Soil. Burying the wire beneath soil is relatively easy. Using a flat-edged shovel, puncture the ground and wiggle the shovel back and forth a bit to create a very narrow trench. Continue this, shovel width by shovel width, until you mark out the entire perimeter of the fence.
Why do you twist dog fence wire?
The twisted wire carries the signal from your transmitter box out to the main loop but stays neutral and allows your dog to cross over without correction (without the twisted wire your dog would not be able to cross the line that runs from your transmitter out to the boundary loop).
What happens if you don't ground an electric fence?
If It Isn't Grounded, It Won't Shock When an animal touches the electrically charged fence wire, the animal feels the electric current as the charge passes through the body. The charge then completes the circuit through the soil via the ground rod and then up the ground wire to the ground terminal charger.
Can electric fence wire touch itself?
Electric fence wire can only touch itself in specific circumstances. If an electric wire is touching itself because the wire is not pulled tightly enough for the fence, the electric fence will not work. Electric fence wire can touch itself if the wire is twisted around itself, though.
Where do you put the flags for electric fence?
Approach the wire until you hear the collar begin to start beeping. Place a dog fence flag at the location where you hear the collar begin to beep. Walk back into the safe zone until the beeping stops. Repeat this process around your yard, placing 1 flag every 10 feet until your boundary zone is fully marked.
What Colours do dogs hate?
Dogs would see a rainbow as dark yellow (sort of brownish), light yellow, gray, light blue, and dark blue. Dogs don't see red, purple (violet), or orange like we do.
How do you train a dog on an invisible fence?
0:082:11Training Your Pet for an Underground Wireless Fence - YouTubeYouTubeStart of suggested clipEnd of suggested clipApproach the warning zone. When you hear the alert guide the dog back into the yard and reward themMoreApproach the warning zone. When you hear the alert guide the dog back into the yard and reward them with a treat. Next introduce correction set the transmitter to apply a low level of correction.
How do you set up a wireless dog fence?
3:184:54Setting Up a Wireless Pet Fence - YouTubeYouTubeStart of suggested clipEnd of suggested clipWalk the entire area to ensure the boundary area is where you'd like it to be if it isn't you canMoreWalk the entire area to ensure the boundary area is where you'd like it to be if it isn't you can adjust using the boundary switch on your transmitter. Or moving the transmitter within your home.
How do you install an invisible fence above ground?
2:3520:34Installing an Above Ground Electric Dog Fence 800-396-5517 - YouTubeYouTubeStart of suggested clipEnd of suggested clipIt's definitely advisable in those areas where it's not level with the ground to try to get itMoreIt's definitely advisable in those areas where it's not level with the ground to try to get it buried six inches or deeper just to avoid edgers. And general lawn maintenance.
How do I install an underground dog fence in my backyard?
0:394:28How to Install a Dog Fence Back Yard Only | Call us for free expert adviceYouTubeStart of suggested clipEnd of suggested clipAround. This inside loop around to the outside loop. And all the way back around to this splice. TheMoreAround. This inside loop around to the outside loop. And all the way back around to this splice. The other side of the twisted pair into the other side of the transmitter.
How do you install a double loop dog fence?
The answer is a double loop. Here is how it works. You go around 3 sides of your yard, then double back on the first wire you put down, laying the wires parallel to each other. You just have to be sure to separate the parallel wires by at least 4 feet.
Why do dogs have flags on their fences?
Those flags are part of conditioning the dog so he/she knows where the new boundaries are . The invisible fence people tell the homeowners to leave the flags alone so you are pretty much out of luck.
Why is it impossible to trim flags?
Its almost impossible to trim around the flags because if you hit them with the trimmer they come flying out of the ground. Leaving them untrimmed looks bad. Pulling them all out and replacing them after mowing is a pain in the rear. I have ran across this several times over the years.
How to contact invisible fence?
Bring your Invisible Fence Brand transmitter and Computer Collar Receiver with you to your new home and contact us at 866-804-1250 to install new boundary wire, flag your property and re-train your pet (s) to their new boundaries. To request a service appointment online, click here.
How snug should an invisible fence collar be?
The Invisible Fence collar should be snug enough to slide only one finger between a correction post and your pet’s skin. Remember to adjust the fit of the collar as your pet’s coat, weight, and age change. Your pet’s coat may change from season to season.
Why does my invisible fence beep?
These can be caused by digging too deep when working in the yard, burrowing animals, and even the weather. The most important thing to know is that your fence will NOT contain your pets when there is a wire break, so you should not let your pets outside until the issue is resolved. To set up a service call for a wire break, call 866-804-1250 or request a service appointment from your local dealer online by clicking here.
How to schedule a service appointment for invisible fence?
Request a service appointment online by clicking here or by calling us at 866-804-1250. At your service appointment, our Technician will test your entire system including the control panel, lightning and surge protection, Computer Collar Receivers, indoor units, and underground wire. We will provide a complete system analysis and make any necessary repairs to your Invisible Fence system.
Can you put invisible fence wire on an existing fence?
Yes! Invisible Fence system boundary wire can be installed along an existing fence for reinforcement from digging, jumping, or getting out of an open gate. Our Pet Safety Professionals can aid you in the design of your system.
Can you use an invisible fence on a multi pet home?
Yes! Invisible Fence is the perfect solution for multi-pet homes. When used in conjunction with our MicroLite Computer Collar receivers, the Shields Indoor Solutions can be customized for multiple pets. You can keep one pet outside while allowing another to enter, you can separate food bowls, or you can even keep a certain pet off the couch – the options are endless. Learn more about Shields Multi-Pet Solutions.
Can dogs use invisible fence?
The Invisible Fence Brand pet containment system is recommended for dogs and cats, but has been used on other animals such as goats, sheep, donkeys, cows, and pigs – animals that react favorably to conditioning.
How to keep dogs from getting in the fence?
Take your dog on a walk with a long leash and a separate non metal collar, within but near the perimeter of the invisible fence line. Walk a good distance away from your dog inside the fence line.
How to correct a dog that is too close to the fence?
Take your dog on a walk with a leash and a separate non-metal collar, within but near the perimeter of the invisible fence line. When the collar signals your dog with an audio signal that he is too close to the boundary, correct your dog by moving him away from the invisible fence line.
What happens if my dog moves across the fence?
If your dog moves across the invisible fence line he will receive a corrective stimulus. If he ignores the correction, you may need to turn up the volume of the corrective stimulus as necessary, until you dog responds by staying within the boundary in spite of distractions. Reward your dog for retreating when signaled.
When do you call your dog when he is close to the fence?
When the collar signals your dog with an audio signal that he is close to the boundary, call your dog. Reward him for coming to you and leaving the perimeter of the fence line.
Can you put an electric fence on multiple dogs?
Hello Lynn, Some systems can accommodate multiple dogs, individualized correction levels, and small dogs also. It just depends on the system. Check out the link to one system that seems to be able to accommodate your needs: https://www.extremedogfence.com/product/extreme-dog-fence-max-grade-ultimate-performance-system/ I have not personally used the system so I suggest reading reviews also. I don't completely understand your setup but it sounds like you are planning on setting up the electric fence in the area over the fence as a backup if they jump the fence, which would be a narrow area? If so then instead of putting the electric fence on the outside of the physical fence, I suggest burying the electric fence inside your physical fenced area, one foot in front of where the physical fence starts all the way around, so that the dogs learn not to approach the physical fence at all, so they do not jump it to begin with. Having the physical fence by the electric fence also makes it easy for them to remember where it is and teach them to avoid the fence and any fence jumping attempts, plus is gives them a larger area to be in to be able to avoid corrections. Best of luck training, Caitlin Crittenden
Can dogs learn invisible fences?
However, simply turning your dog out to learn how the invisible fence works by trial and error will result in many incidences of negative reinforcement, which can be frightening and confusing to your dog, and may take several unnecessary incidents in order for your dog to learn the boundaries of their invisible fence and stay contained within it. Responsible use of an invisible fence includes teaching your dog what the boundaries of the invisible fence are, and how to understand radio signals warning of impending corrective stimulus so they can react appropriately to avoid triggering the fence.
How to put a dog fence flag in a safe zone?
To place your flags: Take the collar receiver and walk out to where your boundary wire is located. Hold the collar receiver at the height of your dog’s neck. Approach the wire until you hear the collar begin to start beeping. Place a dog fence flag at the location where you hear the collar begin to beep. Walk back into the safe zone until the ...
What is the purpose of a dog fence flag?
The purpose of boundary flags is to give your dog a visual reminder of where the boundary zone is located. The dog’s receiver collar is designed to activate several feet away from the location of your dog fence wire, depending on how you have it set on your transmitter.
What Boundary Do The Flags Represent, Anyhow?
- The invisible fence flags (usually white square-shaped flags) represent the boundary where you tested the extent of your dog’s play area before it receives any warning of any kind. Earlier, you had determined this boundary by going outside on your lawn using a test device that came with the kit. When the test device started to beep, you planted a f...
The Initial Training Period—5 to 7 Days
- Ideally, you’ve already started training your dog to comply with the flag boundary. It’s recommended you train your dog to stay clear of the flags, three times a day for fifteen minutes each. You would have a leash on your dog (use a second, ordinary collar—the receiver collar has well-rounded tips on two prongs, but best not to pull at that collar). When the dog approaches th…
The Static Correction Phase—7 Days
- This time, you’d do the same as above, but have the static correction charge enabled on the collar, thus delivering a gentle jolt to your pet if it crosses too far past the flag boundary. Let your dog go by itself; do not attempt to tug it back on the leash. Similarly, wait a second or two after you hear the warning beep, since there might be a short delay when the receiver collar delivers t…
The Distraction Training Phase—7 Days
- If your dog has cleared the two previous training phases with flying colors, then you’re ready to begin the last phase of training—distractions. This still requires a leash attached to a second, regular collar. By distractions, we mean spectacles that excite your dog outside the boundary, such as a passing squirrel, or a ball rolling down the lawn to its end (or onto the neighbor’s lawn…
The Off-Leash Training Phase—3 Days
- During this phase, you no longer affix your leash to your dog. Supervise it closely and watch it as it plays. Don’t set up any distractions for your dog intentionally. If three days pass by and your dog is still keeping within the flag boundary, it’s doing a great job. If your dog has breached the boundary, you will have to walk up to your dog, order it to re-enter its play zone, and e-start the …
Gradual Removal of Invisible Fence Flags
- If the off-leash training goes well, you can start removing the flags, but not all at once. First, wait four weeks since the day you note “mission accomplished.” After the four-week waiting period, remove every second flag so there is still some visualization of the boundary. Wait another five days. After those five days, remove every second flag from the flags still remaining. Then wait a…