How do you measure the length of a bar?
Measure the bar from end to end to find its true length. Start your tape measure on one end of the bar and extend the tape to the tip on the other side to find the true length. Round the measurement to the nearest inch to know the true length of the chainsaw bar.
What do the numbers on a chainsaw bar mean?
If you are replacing a Stihl® chain, you can look at the numbers on the side of the chain to determine pitch, gauge, and other characteristics of the chain. Example: Your chain has the number 33RM2 stamped in the side of it. The first number represents the pitch: 1 = 1/4" 2 = 0.325"
Can you put a 16 inch bar on a 20 inch chainsaw?
Many chainsaws are designed to take different size units. For example, the Husqvarna 460 Rancher is commonly sold with a 20 inch bar and chain. However, it is capable of taking anything between 13” and 24”....Can you put a longer bar on a chainsaw?Power SizeBar Size (Inches)Battery: 36-40 Volt12-16Battery: 56-80 Volt16-186 more rows
How do I know what size my chainsaw is?
Simply put, the type of chainsaw file you need directly corresponds with the size of your chain pitch. The larger the pitch will mean the higher the cutting teeth will be. The higher the teeth will therefore mean the larger the file will need to be.
What size chainsaw bar do I need?
Typically a chainsaw with a shorter bar around 14” and smaller is enough for property maintenance, trimming, pruning, and cutting down broken tree limbs. On the other hand, cutting down small trees, thick branches, and cleaning up storm damage will need a longer bar around 16”-20” to make the job easier and safer.
How big of a tree can a 20 inch chainsaw cut?
A good rule of thumb is that the diameter of the trees you cut regularly should be no more than twice the length of the bar on a chainsaw. That means a 20-inch chainsaw can handle a 36-inch tree (remember, effective cutting length is roughly -2 inches of the bar length).
Is a longer chainsaw bar better?
The best chainsaw bar length is generally 2 inches longer than the average thickness of wood you're cutting. This is because it is better to have a smaller chainsaw bar that you occasionally also use for larger jobs, than it is to go the largest size chainsaw bar and try to use it on the smaller jobs.
Can I replace my chainsaw bar with a longer one?
Most chainsaws can operate up to three different bar sizes. Guide bars are measured in length, from the tip of the bar to the heel, and range in size from 14 to over 40 inches. Check the specifications in your model's operator's manual to see what size bars you can run on your saw.
What does number 72 mean on a chainsaw chain?
63. .063” The final set of numbers show how many drive links are in the chainsaw chain that will run on that specific bar. This bar has “72” stamped, so it would need a 72 drive link chain. Drive link count can range anywhere from 28 to 210 depending on your bar size.
What does the number 6 mean on a chainsaw chain?
The number 6 on the cutter tells us the pitch is 3/8 lo pro or (picco) and the number 3 on the drive link indicates a gauge of . 050″ (or 1.3mm).
How do you read a chainsaw chain number?
2:143:28How To Identify Your Chainsaw Chain - YouTubeYouTubeStart of suggested clipEnd of suggested clipAnd you can see that's got a line up there and line up down the bottom as well so that one doesn'tMoreAnd you can see that's got a line up there and line up down the bottom as well so that one doesn't line up next one no and then that one there so perfectly lines up with those two teeth.
What does 91 mean on chainsaw chain?
0:002:45How To Identify Your Chainsaw Chain - YouTubeYouTubeStart of suggested clipEnd of suggested clipThe first bit of information is a type of chain that you have this chain in front of you is a typeMoreThe first bit of information is a type of chain that you have this chain in front of you is a type 91 typical example has 91 stamped into the drive links.
How to measure chainsaw bar size?
To determine the chainsaw bar size, simply take a tape measure to measure from the motor housing body, down the length of the bar to the tip of the bar. Then, round up to the next even figure. So if you are looking at a bar that is 18.25 inches long, you’ll round up to a 20-inch replacement bar.
How big of a bar should an electric chainsaw be?
You can’t go with a one-size-fits-all approach. An electric chainsaw will generally have a bar under 18 inches and they will be in a narrower gauge. A chainsaw with a more powerful motor can power the chain around a longer bar and will have a heavier gauge saw chain. The same thing goes with chainsaw chains.
How to find the correct chain size?
The fastest way to get the correct replacement chain size is to find the sizing information that is stamped into the chainsaw bar. Generally, the bar size will be stamped into the bar, near the back where it is mounted to the saw. Depending on the saw, it may be hidden.
What happens if a chainsaw is too short?
If it is too short, it won’t stretch. If it is too long, you can’t create enough tension on it. If the pitch is wrong, the motor sprocket will not engage, and if the gauge is too wide, it won’t slide into your bar. A lumberjack working with a chainsaw. Replacement chains and bars must have the proper sizing for your specific tool.
How many inches of blades do you need for a chainsaw?
Larger chainsaw bars or thicker gauge blades will require more power. Most electric chainsaws are typically smaller and have 12-16 inch blades.
What is the pitch of a chain saw?
Note: The most common chain saw pitches on the market is 3/8″ (.375″, although everyone says 3/8″ instead) or .325″. You are pretty much guaranteed to have one or the other.
What are rivets on a chain?
So the rivets are those little round spots on the side of the chain. They are what hold the chain together. You’ll pick any three, and measure from the center of the first one to the center of the third one.
Where to measure guide bar on chainsaw?
If you can not find the information on your old guide bar you will need to measure your guide bar from where it inserts into the chainsaw all the way to the tip of the bar. Remember to round this number to get the effective length of the bar.
How to measure chainsaw bar length?
To measure the length of a chainsaw bar you will need to measure from the point where the guide bar inserts into the chainsaw all the way to the tip of the bar. This measurement is typically done in inches and rounded to the nearest round number. This is the effective length of the guide bar and it’s the number you are looking for if you’re trying to find the length of your bar.
What Does the Pitch of a Guide Bar Mean?
The pitch is the distance between drive links on the chain and only applies if your guide bar has a sprocket on the tip. If your bar does not have a sprocket you can ignore the pitch as it relates to the bar and chain however you need to make sure it matches the pitch on your chainsaws sprocket. If your bar does have a sprocket and you cant read the pitch directly off the bar you will need to determine the pitch.
Why Match Bar Oil Intake Port and Chainsaw Oil Output Port?
Determining the length, pitch, and gauge of your chainsaw’s guide bar is vital to select the correct guide bar and chain for your chainsaw. However, another very important thing to remember is making sure the oil intake port on the guide bar lines up with the oil output port on the chainsaw.
What are the different chainsaw bar lengths?
Chainsaw bars come in many different lengths to fit a wide range of chainsaws that have varying degrees of horsepower and other operating specifications.
Can I put a 20 inch bar on a 16 inch chainsaw?
A chainsaw with a 16″ bar and chain can tackle small and medium-sized tasks in most cases. But what if you’re needing a longer bar to get the job done? Can you put a 20-inch bar on a 16-inch chainsaw?
How to determine gauge of guide bar?
The gauge of the guide bar is the width of the slot that the chains fit into on the guide bar. If you can not read the gauge of the bar and chain directly from the bar you will need to calculate it. The method of determining the gauge is calculated by measuring the width of the chain’s drags, the part of the chain that fits into the bars slot. This number is represented in thousandths of an inch. Typical gauges are .043, .050, and .063. The thicker the gauge the stronger the chain.
How do you measure the chainsaw bar? Where do you measure it from?
the tail-tip distance, is not a valid parameter for measuring a chainsaw bar.To measure a chainsaw bar, take into account the cutting length , the useful length of the bar, which is equal to the part of the bar that comes out of the chainsaw body.
How to Measure a Stihl Chainsaw Bar?
One of the parameters of the guide is its size. Typically, chainsaw guide rail size is indicated in inches, sometimes in centimeters.
What do the numbers mean on a chainsaw bar?
Therefore, the characteristics of the attachment plan of the chainsaw blade are essential in the choice of the chainsaw bar and are summarized by the last letter and the last 3 numbers of the bar type identification code, for example “K095 ”. Now let’s explain better:
What is the blade on a chainsaw?
This is the blade that extends from the chainsaw engine casing and carries the chain which is what makes the cut for you.
What type of bar is used for a 162 chainsaw?
For example, for the Efco 162 professional chainsaw , the manual recommends several types of bars , including the 168RNDK095 type.
How long is a chainsaw bar?
Normal chainsaw bars, on the other hand, range from 35 to 76 cm in cutting length.
Why is it not recommended to install a chainsaw bar longer than indicated by the manufacturer?
It is not recommended to install a chainsaw bar longer than indicated by the manufacturer, because this affects the engine speed. The longer the chainsaw bar, the more the engine spends power to rotate the crankshaft to accelerate the chain, and this affects engine wear. This is the most important rule to follow.
