
How to Install a Washing Machine Outlet Box
- Identify and prepare the installation area. Decide on a location between two wall studs straight at the rear of the washing machine to set up the outlet box. ...
- Safeguard the Washing Machine Outlet Box. ...
- Connect the Water Supply Lines. ...
- Connect the Washing Machine Lines. ...
- Cover the Outlet Box. ...
What is a washing machine outlet box?
Oatey® Washing Machine Outlet Boxes can be used in commercial or residential applications that require supply valves and waste drains recessed into the wall.
Where is the faucet box on a washing machine?
The faucet box sits behind the washing machine (typically 42 inches above the floor) and surrounds the hot and cold water valves. Most are made of hard plastic or vinyl and are screwed onto two wall studs (vertical framing members). Faucet boxes are durable and rarely, if ever, need replacing.
Where to hook up a washing machine to the wall?
Go to the manufacturers website for the appliance you are considering and look at the manual which shows the hookup locations. With a spot that tight, the best place is probably going to be in the back of the "gutter" to the right of the machines. No matter where you put it, it will be a bear to hook up.
Should I install a washer outlet box?
Before you put your new washer and dryer in your house you should install a washer outlet box if it’s not already there. Not only does it make the laundry room look nicer, it helps keep all of your hoses organized.
Do you need an outlet box for a washer and dryer?
Should a washer outlet box be straight?
About this website

How high should the washing machine outlet box be?
32” to 34”Once you've selected the right washing machine outlet box for your situation, it should be installed at a height where the flood level rim (or the top of the drainage outlet) is 32” to 34” above the finished floor.
Does a washing machine box have to be vented?
All plumbing fixtures—including washing machines—must be vented. Improperly vented drains can be sluggish and noisy, and can emit hazardous fumes. Properly vented drains allow the P-trap to do its job: prevent sewer gases from escaping into your home.
What is the purpose of a washing machine outlet box?
Laundry boxes are recessed into the wall behind the washing machine and provide water supply line connections and a wastewater drain. These outlets improve the look of your laundry area by hiding pipes and tidying hoses. More importantly, they provide easy shutoff valves in the event of a leak or a burst hose.
Can washing machine outlet box be installed upside down?
Yes, both boxes can be converted to a Top Mount application by turning the box upside down and utilizing the drain molded to the top of the box.
Can a washer and toilet share the same drain?
Your drains are connected – One of the main reasons your toilet gurgles when your washer machine drains is because your washer machine is connected to the toilet drain. This isn't uncommon. Your washing machine might have been placed in between your toilet and sewer stack.
How far can a vent be from a washing machine?
How far can a vent be from a washing machine? If your washing machine is located in an interior room, the maximum distance the vent pipe can run is around 10 to 15 feet. If the machine is located in an exterior wall, the vent pipe can be vented directly to the outside.
How much does it cost to install a washing machine box?
Budget roughly $50 to $175 per unit for the simplest, most-straightforward projects. You can hire a local handyperson for the job, but you may need an electrician to install new outlets. You'll pay around $100 if you need a new outlet for the washer, and about $500 if you need a 240-volt plug for the dryer.
Does a washer have to be GFCI protected?
GFCI Protection: 210.8(A)(10) – All 125V, 15a and 20a receptacles installed in “Laundry Areas” shall have GFCI protection. The NEC doesn't require GFCI protection for clothes washing machines specifically, but it does for “Laundry Areas.”
How tall should a washing machine standpipe be?
Laundry standpipes must be tall enough to extend past the washing machine's overflow line—typically 30-36” in height, or 18”-30” above the trap. P-trap. P-traps prevent hazardous and potentially flammable sewer gases from entering your home. Any fixture connected to a waste line must have a P-trap.
What is the maximum height for a washing machine drain?
In order for the drain hose on your Top Load washer to function properly, the drain must be at least 30" up from the floor and less than 8 feet high. In order for the drain hose on your Front Load washer to function properly, the drain must be at least 24" up from the floor and less than 8 feet high.
Does a washing machine need a dedicated circuit?
They feature powerful motors and/or heating elements, so both washing machines and electric dryers typically require dedicated circuitry. This is especially true for dryers. Generally, any equipment that runs on 220-volt power must have its own circuit.
How do you vent a washing machine drain pipe?
Bend the tip of the drain hose into a U-shape, then hook it up to the drain hole beside the water inlet valve. The drain hole should then be connected to the main ventilation pipe. Install an AAV, or air admittance valve, on the drainage pipe to control the air pressure when you drain.
Does a laundry room need ventilation?
Proper laundry room ventilation is often overlooked by homeowners when remodeling their homes. Laundry room ventilation is important as it can be a major source of contaminants in your house. A poorly ventilated laundry room will have moisture buildup.
Does a laundry room require an exhaust fan?
A laundry room should have an exhaust fan and proper ventilation for various reasons. These include controlling moisture levels and preventing mildew, as well as preventing lint fires and preserving the health of the home's occupants. Exhaust fans can also keep your laundry room cooler.
How do you vent a washing machine drain pipe?
Bend the tip of the drain hose into a U-shape, then hook it up to the drain hole beside the water inlet valve. The drain hole should then be connected to the main ventilation pipe. Install an AAV, or air admittance valve, on the drainage pipe to control the air pressure when you drain.
Do laundry rooms need vented doors?
Ventilation is an important consideration when choosing doors for a laundry room. If you don't select a style that allows air to circulate (such as a louvered door), be sure your space has another form of ventilation so the heat and humidity created by the washer and dryer can escape.
Do you need an outlet box for a washer and dryer?
Before you put your new washer and dryer in your house you should install a washer outlet box if it’s not already there. Not only does it make the laundry room look nicer, it helps keep all of your hoses organized. The washer outlet box is very simple to install by following these instructions.
Should a washer outlet box be straight?
While installing the washer outlet box you should make it appear more straight than level. Not all homes are exactly level so you may have to eyeball it to be straight on the wall rather than rely on your level.
What is a faucet box?
Things You'll Need. The faucet box sits behind the washing machine (typically 42 inches above the floor) and surrounds the hot and cold water valves. Most are made of hard plastic or vinyl and are screwed onto two wall studs (vertical framing members). Faucet boxes are durable and rarely, if ever, need replacing.
Where is the water shut off valve?
Shut off the water at your home's main cutoff valve; it's usually in the basement or wherever your water supply lines enter the house.
What type of circuit breaker is used for washing machines?
Safety Breaker. Washing machines can be plugged into a standard three-wire grounded AC circuit that is equipped with circuit-breaker protection. The breaker cuts off current if there is a short or overload on the electrical circuit supplying power.
How many volts does a washing machine use?
Woman putting clothes in a washing machine. Standard household electric power in the United States is 110 to 120 volts, with a 60-cycle alternating current, and most household washers can be plugged into wall outlets supplying this current.
Do you need a GFI outlet for a washing machine?
GFI Protection. Installing a ground fault interrupting (GFI) outlet provides an extra level of protection against electric shock, but a GFI outlet is not required for washing machines under the National Electrical Code unless the washer outlet is located in an unfinished basement or within 6 feet of a sink.
Where to put laundry receptacles?
With a spot that tight, the best place is probably going to be in the back of the "gutter" to the right of the machines. No matter where you put it, it will be a bear to hook up. I usually mount the laundry receptacles about 42 - 48" height, but code does not have any requirement in this area.
Where to put ibpooks on laundry machine?
ibpooks. With a spot that tight, the best place is probably going to be in the back of the "gutter" to the right of the machines. No matter where you put it, it will be a bear to hook up. I usually mount the laundry receptacles about 42 - 48" height, but code does not have any requirement in this area.
How long should a dryer cord be behind a washer?
I have worked on many of washer/ dryer Combos like yours. I like the connections to be higher than washer and dryer cord and vent tube to be long enough to take dryer off washer and either set on floor or set on a table in front of washer. This will mean a dryer cord 6 feet long at least. Remember you need at least 6 inches behind washer/ dryer for the vent hose. Also any time you need a repair there will be extra charges for a second tech to unstack them.
Do you need an outlet box for a washer and dryer?
Before you put your new washer and dryer in your house you should install a washer outlet box if it’s not already there. Not only does it make the laundry room look nicer, it helps keep all of your hoses organized. The washer outlet box is very simple to install by following these instructions.
Should a washer outlet box be straight?
While installing the washer outlet box you should make it appear more straight than level. Not all homes are exactly level so you may have to eyeball it to be straight on the wall rather than rely on your level.