A backflow valve is usually located near the area where water enters the system from the main water source. You can usually find the sprinkler valves near it. You can also find the sprinkler valves by following the wires from the timer, and these are buried typically two inches into the ground. Use the small trowel to uncover them.
Where are sprinkler valves located?
Where are sprinkler valves located? Sometimes the valves are located above ground, usually near where the source pipe emerges from the house to split into various irrigation zones. In this case, it's usually quite easy to find the valves. Often the valves are located inside one or more in-ground valve boxes.
How to find sprinkler valves?
How to Locate Underground Sprinkler Valves
- Locate the Irrigation Plan. Home systems usually have an irrigation plan drawn. ...
- Locate the Backflow Valve. A backflow valve is usually located near the area where water enters the system from the main water source.
- Follow the Irrigation Timer. ...
- Follow the Water Lines. ...
- Identify Chatter. ...
Where is PVC valve located?
Where is a PCV valve located? A PCV valve located in the valve cover. It may be located on or near the intake manifold, as shown here. A PVC valve located on the valve cover, with the hose that leads to it removed. A hose leading to the PCV valve is often kept in place by a clamp. Click to see full answer.
Can't find sprinkler valve box?
Probe along the suspected pipe path with a pointed stick tipped with a metal nail to find the valve box. Do not use the probing method if your valves are not enclosed in a box, however, as you may damage the valve or wiring with the probe. Stick the probe in the ground and listen or feel for it to hit the hollow box containing the valve.
Where are valves located?
How to find buried irrigation valves?
How to trace sprinkler wires?
What is irrigation repair?
How to find valves in the ground?
How to locate valve solenoid?
Where are below ground valves located?
See 2 more
Locating an Irrigation Valve with a Wire and Valve Locator
When buried irrigation valves need maintenance or replacement, they can be difficult to find. Whether in valve boxes or buried unprotected, their location can be covered by dirt or mulch, or overgrown by grass. If the original system diagram is lost, or the sprinklers were installed by a previous homeowner, you need a method of […]
How to Locate a Non-Working Sprinkler Valve - Home Guides
How to Locate a Non-Working Sprinkler Valve. Your garden sprinklers typically have multiple valves that control separate zones for watering accuracy. For example, the flowerbed uses one valve ...
Where are valves located?
In this case, it's usually quite easy to find the valves. Often the valves are located inside one or more in-ground valve boxes. The tops of these boxes will be at ground level, and these, too, are usually fairly easy to spot and access. The valve box, or sometimes the valves themselves, are sometimes buried underground.
How to find buried irrigation valves?
Often you can estimate the rough location of the irrigation valve, then find a buried valve box by probing the ground.
How to trace sprinkler wires?
With automatic sprinkler systems, you may be able to trace the controller wires all the way from the main controller to the valve locations. Dig holes every 10 feet or so to observe the direction of the wires until you locate the valve, but be careful not to damage the wires as you dig—a hand trowel is the best tool to use.
What is irrigation repair?
natbits / Getty Images. In a lawn irrigation system, repair or replacement of an irrigation valve is a very common repair. An irrigation system is typically divided into several zones, each of which feeds sprinkler heads in a different area of the lawn or garden, and each zone is controlled by a valve that receives signals from a centrally located ...
How to find valves in the ground?
Begin by looking for exposed valve boxes. In many instances, the valves will be conveniently located in green or black plastic boxes set into the ground, with covers that can be removed to expose the valves. These boxes have covers that can be removed to access the valves. Over time, however, these boxes can get covered with grass and dirt. After a few years, they can virtually disappear.
How to locate valve solenoid?
A simple tool known as a chatter locator energizes the valve solenoid, making it possible to locate the valve by listening for the clicking sound it makes.
Where are below ground valves located?
Here are some tips for location below-ground valves, beginning with the easiest. Begin by looking for exposed valve boxes. In many instances, the valves will be conveniently located in green or black plastic boxes set into the ground, with covers that can be removed to expose the valves. These boxes have covers that can be removed to access ...
How to locate a valve in lawn irrigation system?
Rent a valve-locating device. These devices detect lost valves by tracking the wires from the controller to the lawn irrigation system valve site. A valve-locating device contains a transmitter, a receiver, two lead wires, and a grounding stake. It transmits a beeping signal along the wire to find irrigation valves. Utilizing a valve locator is a definite means to discover lost valves without damaging the lawn.
What wire do sprinkler valves use?
Sprinkler valves are operated electronically using low voltage 24v power generally of 18 gauge wire for residential, and 14 gauge wire for commercial. Valves require a separate 24v power wire for each valve and are connected together with a white "common" wire, linked between each valve. The process to find sprinkler valves can be complicated;
What is an automatic irrigation valve?
Automatic irrigation valves are usually a globe or angle (straight or bent) and use a diaphragm and an electric solenoid to switch the valve open and close. Sprinkler valves are commonly plastic for residential and most commercial applications then metal for heavy-duty sites such as golf courses and municipal pumping stations.
How to check if a valve is whizzing?
Listen for clicking noise at the solenoid . Turn on the valve and try to listen to the buzzing solenoid or water whizzing through the valve. Try to utilize a mechanic's stethoscope on the ground to monitor it.
What is a wire locator?
Use a wire locator which is also known as a wire tracer device. In some tool rental places, especially in locations that provide to professional contractors, have wire tracers they rent. This device is used to follow the path of the wires to the valve, starting at the controller/timer.
Can you find a sprinkler valve?
Sometimes it is a bit challenging to locate sprinkler valves. Although an irrigation system can operate smoothly for many years, sprinkler systems will need regular maintenance, and often times the valve boxes are hidden and tough to find. Locating a malfunctioning sprinkler valve can be difficult when a valve replacement or tune-up is required. The sprinkler valve boxes can be covered by mulch, grass may be overgrown, and the valves can even be buried directly in the dirt without a valve box.
Where are valves located?
In this case, it's usually quite easy to find the valves. Often the valves are located inside one or more in-ground valve boxes. The tops of these boxes will be at ground level, and these, too, are usually fairly easy to spot and access. The valve box, or sometimes the valves themselves, are sometimes buried underground.
How to find buried irrigation valves?
Often you can estimate the rough location of the irrigation valve, then find a buried valve box by probing the ground.
How to trace sprinkler wires?
With automatic sprinkler systems, you may be able to trace the controller wires all the way from the main controller to the valve locations. Dig holes every 10 feet or so to observe the direction of the wires until you locate the valve, but be careful not to damage the wires as you dig—a hand trowel is the best tool to use.
What is irrigation repair?
natbits / Getty Images. In a lawn irrigation system, repair or replacement of an irrigation valve is a very common repair. An irrigation system is typically divided into several zones, each of which feeds sprinkler heads in a different area of the lawn or garden, and each zone is controlled by a valve that receives signals from a centrally located ...
How to find valves in the ground?
Begin by looking for exposed valve boxes. In many instances, the valves will be conveniently located in green or black plastic boxes set into the ground, with covers that can be removed to expose the valves. These boxes have covers that can be removed to access the valves. Over time, however, these boxes can get covered with grass and dirt. After a few years, they can virtually disappear.
How to locate valve solenoid?
A simple tool known as a chatter locator energizes the valve solenoid, making it possible to locate the valve by listening for the clicking sound it makes.
Where are below ground valves located?
Here are some tips for location below-ground valves, beginning with the easiest. Begin by looking for exposed valve boxes. In many instances, the valves will be conveniently located in green or black plastic boxes set into the ground, with covers that can be removed to expose the valves. These boxes have covers that can be removed to access ...
